lcsTrapDestinationConfTrapMode
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.1.6.3.1.3
Object
Indicates the SNMP mode operation. Possible modes are: 2: Enable TCP SNMP mode operation. 1: Enable UDP SNMP mode operation. 0: Disable SNMP mode operation.
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.1.6.3.1.3- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lcsTrapDestinationConfEntry
- Table
- lcsTrapDestinationConfTable
- Siblings
- 9
Syntax
SNMPv2-SMIInteger32
- Source
- SNMPv2-SMIInteger32
- Base type
Integer32
Values & Constraints
Enumerated Values
0 | access |
1 | trunk |
2 | hybrid |
Type Constraints
range: -2147483648..2147483647
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsTrapDestinationConfIndex Index of tarp destination configurations. | column | Integer32 | .1.3.6.1.4.1.2356.14.1.6.3.1.1 |
| lcsTrapDestinationConfTrapSecurityEngineID Indicates the SNMP trap security engine ID.
SNMPv3 sends traps and informs using USM for authentication and privacy.
A unique engine ID for these traps and informs is needed.
When… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.12 |
| lcsTrapDestinationConfTrapSecurityName Indicates the SNMP trap security name.
SNMPv3 traps and informs using USM for authentication and privacy.
A unique security name is needed when traps and informs are enabled.
This… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.13 |
| lcsTrapDestinationConfTrapRowStatus This object indicates the status of this entry, and is
used to create(5)/delete(6) entries. Any object in an entry of
this table may be modified while the value of the
correspond… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.14 |
| lcsTrapDestinationConfTrapConfigName Indicates which trap Configuration's name for configuring.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.2 |
| lcsTrapDestinationConfTrapVersion 0: snmpv1
1: snmpv2c
3: snmpv3. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.4 |
| lcsTrapDestinationConfTrapCommunity Indicates the community access string when sending SNMP trap packet.
The allowed string length is 0 to 255, and the allowed content is
ASCII characters from 33 to 126. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.5 |
| lcsTrapDestinationConfTrapDestinationAddres Indicates the SNMP trap destination address.
It allow a valid IP address in dotted decimal notation ('x.y.z.w').
And it also allow a valid hostname.
A valid hostname is a string d… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.1.6.3.1.6 |
| lcsTrapDestinationConfTrapDestinationPort Indicates the SNMP trap destination port.
SNMP Agent will send SNMP message via this port,
the port range is 1~65535. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.1.6.3.1.7 |