lcsQosMacEtherType

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.18
MIB view Table view

Object

column r/w SNMPv2-TCDisplayString 
Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any.

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.18
Type
column
Access
readwrite
Status
current
Parent
lcsQosQceEntry
Table
lcsQosQceTable
Siblings
51

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lcsQosQceIndex
the index to this table.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.1
lcsQosSMAC
Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.10
lcsQosDMACType
Destination MAC type: possible values are 'UC'(unicast), 'MC'(multicast), 'BC'(broadcast), 'SP'(Specific) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.11
lcsQosDMACValue
when QosDMACType is 'SP'(specific) can set mac address.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.12
lcsQosQceInnerTag
Value of Inner Tag field can be 'Any', 'Untagged' or 'Tagged' or 'C-tagged' or 'S-tagged'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.13
lcsQosQceInnerVID
Valid value of Inner VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.14
lcsQosInnerPCP
Valid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.15
lcsQosInnerDEI
Valid value of Inner DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.16
lcsQosFrameType
Frame Type can have any of the following values: 1: Any, 2: Ethernet, 3: LLC, 4: SNAP, 5: IPv4, 6: IPv6.
columnEnumeration.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.17
lcsQosLLCSSAPAddr
Valid SSAP(Source Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.19
lcsQosQceID
If the QCE ID is specified and an entry with this QCE ID already exists, the QCE will be modified. Otherwise, a new QCE will be added. range : 1 - 256.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.2
lcsQosLLCDSAPAddr
Valid DSAP(Destination Service Access Point) can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.20
lcsQosLLCControl
Valid Control field can vary from 0x00 to 0xFF or 'Any', range: 00-FF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.21
lcsQosSNAPPID
Valid PID(a.k.a ethernet type) can have value within 0x00-0xFFFF or 'Any', range: 0000-FFFF, default: Any.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.22
lcsQosIpv4Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.23
lcsQosIpv4ProtocolValue
Ipv4 Protocol is Other. range: 0-255 default: 0.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.24
lcsQosIpv4ProtocolUDPSPort
Source TCP/UDP Port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.25
lcsQosIpv4ProtocolUDPDPort
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.26
lcsQosIpv4ProtocolTCPSPort
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.27
lcsQosIpv4ProtocolTCPDPort
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.28
lcsQosIpv4SourceIp
Specific Source IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x not …
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.29
lcsQosQceList
If the QCE List is non zero, the QCE will be placed in the list. If the QCE List is zero, the QCE will be placed last in the list. range : 0 - 256.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.3
lcsQosIpv4SourceMask
Specific Source IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.30
lcsQosIpv4DestIp
Specific Destination IP address in value format or value 0.0.0.0 is 'Any'. if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'. (x.y.z.w),x=0 unless y.z.w also 0,x…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.31
lcsQosIpv4DestMask
Specific Destination IP address in mask format or value 0.0.0.0 is 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.32
lcsQosIpv4IPFragment
IPv4 frame fragmented option: 2: yes, 1: no, 0: any.
columnEnumeration.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.33
lcsQosIpv4DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.34
lcsQosIpv6Protocol
IP protocol number: (Other, TCP or UDP) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.35
lcsQosIpv6ProtocolValue
when IPv6 protocol is Other , range: 0-255.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.36
lcsQosIpv6ProtocolUDPSPort
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.37
lcsQosIpv6ProtocolUDPDPort
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.38
lcsQosIpv6ProtocolTCPSPort
Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.39
lcsQosIpv6ProtocolTCPDPort
Destination TCP/UDP port:(0-65535) or 'Any', specific or port range applicable for IP protocol UDP/TCP.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.40
lcsQosIpv6SourceIp
IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.41
lcsQosIpv6SourceMask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.42
lcsQosIpv6DestIp
IPv6 destination address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.43
lcsQosIpv6DestMask
IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.44
lcsQosIpv6DSCP
Diffserv Code Point value (DSCP): It can be a specific value, range of values or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or AF11-AF43.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.45
lcsQosActionQueuePriority
QoS class: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.46
lcsQosActionDPL
range:0-4. 4: Default
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.47
lcsQosActionDSCP
Valid DSCP value can be (0-63, BE, CS1-CS7, EF or AF11-AF43) or 64: Default.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.48
lcsQosActionPCP
pcp: (0-7) or 8: Default.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.49
lcsQosQcePortMembers
Indicates the ingress port of the QCE. Possible values are: All: The QCE will match all ingress port. Port: The QCE will match a specific ingress port.Format: 1,3-6.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.5
lcsQosActionDEI
dei: (0-1) or 2: Default.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.50
lcsQosActionPolicy
ACL Policy number: (0-127) or 'empty'(128). Default: empty.
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.51
lcsQosActionIngressMapID
Classify Ingress Map ID: Range: 0-255 Default: -1
columnInteger32.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.52
lcsQosQceRowStatus
This object indicates the status of this entry, and is used to create/delete entries. Any object in an entry of this table may be modified while the value of the corresponding in…
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.53
lcsQosQceTag
'Any', 'Untagged' or 'Tagged' or 'C-Tag' or 'S-Tag'
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.6
lcsQosQceVID
Valid value of VLAN ID can be any value in 'Specific 1~4094' or 'range 1-4094' or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.7
lcsQosPCP
Priority Code Point: Valid value PCP are specific(0, 1, 2, 3, 4, 5, 6, 7) or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.8
lcsQosDEI
Drop Eligible Indicator: Valid value of DEI can be any of values between 0, 1 or 'Any'.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.9