lcsQosActionIngressMapID
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.52
Object
column
r/w
Integer32
Classify Ingress Map ID: Range: 0-255 Default: -1
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.10.1.11.1.1.52- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- lcsQosQceEntry
- Table
- lcsQosQceTable
- Siblings
- 51
Syntax
Integer32
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsQosQceIndex the index to this table. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.1 |
| lcsQosSMAC Source MAC address: xx-xx-xx-xx-xx-xx or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.10 |
| lcsQosDMACType Destination MAC type: possible values are 'UC'(unicast),
'MC'(multicast), 'BC'(broadcast), 'SP'(Specific) or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.11 |
| lcsQosDMACValue when QosDMACType is 'SP'(specific) can set mac address. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.12 |
| lcsQosQceInnerTag Value of Inner Tag field can be 'Any', 'Untagged' or 'Tagged' or
'C-tagged' or 'S-tagged'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.13 |
| lcsQosQceInnerVID Valid value of Inner VLAN ID can be any value in
'Specific 1~4094' or 'range 1-4094' or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.14 |
| lcsQosInnerPCP Valid value Inner PCP are specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.15 |
| lcsQosInnerDEI Valid value of Inner DEI can be any of values between
0, 1 or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.16 |
| lcsQosFrameType Frame Type can have any of the following values:
1: Any,
2: Ethernet,
3: LLC,
4: SNAP,
5: IPv4,
6: IPv6. | column | Enumeration | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.17 |
| lcsQosMacEtherType Valid ethernet type can have a value within 0x600-0xFFFF or 'Any' ,
but excluding 0x800(IPv4) and 0x86DD(IPv6),
range: 0000-FFFF,
default: Any. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.18 |
| lcsQosLLCSSAPAddr Valid SSAP(Source Service Access Point) can vary from
0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.19 |
| lcsQosQceID If the QCE ID is specified and an entry with this QCE ID
already exists, the QCE will be modified. Otherwise, a
new QCE will be added.
range : 1 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.2 |
| lcsQosLLCDSAPAddr Valid DSAP(Destination Service Access Point) can
vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.20 |
| lcsQosLLCControl Valid Control field can vary from 0x00 to 0xFF or 'Any',
range: 00-FF,
default: Any. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.21 |
| lcsQosSNAPPID Valid PID(a.k.a ethernet type) can have value within
0x00-0xFFFF or 'Any',
range: 0000-FFFF,
default: Any. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.22 |
| lcsQosIpv4Protocol IP protocol number: (Other, TCP or UDP) or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.23 |
| lcsQosIpv4ProtocolValue Ipv4 Protocol is Other.
range: 0-255
default: 0. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.24 |
| lcsQosIpv4ProtocolUDPSPort Source TCP/UDP Port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.25 |
| lcsQosIpv4ProtocolUDPDPort Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.26 |
| lcsQosIpv4ProtocolTCPSPort Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.27 |
| lcsQosIpv4ProtocolTCPDPort Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.28 |
| lcsQosIpv4SourceIp Specific Source IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x not … | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.29 |
| lcsQosQceList If the QCE List is non zero, the QCE will be placed in the list.
If the QCE List is zero, the QCE will be placed last in the list.
range : 0 - 256. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.3 |
| lcsQosIpv4SourceMask Specific Source IP address in mask format or value 0.0.0.0 is 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.30 |
| lcsQosIpv4DestIp Specific Destination IP address in value format or value 0.0.0.0 is 'Any'.
if Ipv4 Mask value 0.0.0.0 is 'Any' ,IP address value also is 'Any'.
(x.y.z.w),x=0 unless y.z.w also 0,x… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.31 |
| lcsQosIpv4DestMask Specific Destination IP address in mask format or value 0.0.0.0 is 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.32 |
| lcsQosIpv4IPFragment IPv4 frame fragmented option:
2: yes,
1: no,
0: any. | column | Enumeration | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.33 |
| lcsQosIpv4DSCP Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the range 0-63. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.34 |
| lcsQosIpv6Protocol IP protocol number: (Other, TCP or UDP) or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.35 |
| lcsQosIpv6ProtocolValue when IPv6 protocol is Other ,
range: 0-255. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.36 |
| lcsQosIpv6ProtocolUDPSPort Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.37 |
| lcsQosIpv6ProtocolUDPDPort Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.38 |
| lcsQosIpv6ProtocolTCPSPort Source TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.39 |
| lcsQosIpv6ProtocolTCPDPort Destination TCP/UDP port:(0-65535) or 'Any',
specific or port range applicable for IP protocol UDP/TCP. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.40 |
| lcsQosIpv6SourceIp IPv6 source address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.41 |
| lcsQosIpv6SourceMask IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.42 |
| lcsQosIpv6DestIp IPv6 destination address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.43 |
| lcsQosIpv6DestMask IPv6 mask address: (a.b.c.d) or value 0.0.0.0 is 'Any', 32 LS bits. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.44 |
| lcsQosIpv6DSCP Diffserv Code Point value (DSCP): It can be a specific value,
range of values or 'Any'. DSCP values are in the
range 0-63 including BE,
CS1-CS7, EF or AF11-AF43. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.45 |
| lcsQosActionQueuePriority QoS class: (0-7) or 8: Default. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.46 |
| lcsQosActionDPL range:0-4. 4: Default | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.47 |
| lcsQosActionDSCP Valid DSCP value can be (0-63, BE, CS1-CS7,
EF or AF11-AF43) or 64: Default. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.48 |
| lcsQosActionPCP pcp: (0-7) or 8: Default. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.49 |
| lcsQosQcePortMembers Indicates the ingress port of the QCE. Possible values are:
All: The QCE will match all ingress port.
Port: The QCE will match a specific ingress port.Format: 1,3-6. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.5 |
| lcsQosActionDEI dei: (0-1) or 2: Default. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.50 |
| lcsQosActionPolicy ACL Policy number: (0-127) or 'empty'(128). Default: empty. | column | Integer32 | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.51 |
| lcsQosQceRowStatus This object indicates the status of this entry, and is used
to create/delete entries. Any object in an entry of this table
may be modified while the value of the corresponding in… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.53 |
| lcsQosQceTag 'Any', 'Untagged' or 'Tagged' or 'C-Tag' or 'S-Tag' | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.6 |
| lcsQosQceVID Valid value of VLAN ID can be any value in
'Specific 1~4094' or 'range 1-4094' or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.7 |
| lcsQosPCP Priority Code Point: Valid value PCP are
specific(0, 1, 2, 3, 4, 5, 6, 7)
or range(0-1, 2-3, 4-5, 6-7, 0-3, 4-7) or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.8 |
| lcsQosDEI Drop Eligible Indicator: Valid value of DEI can be
any of values between 0, 1 or 'Any'. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.10.1.11.1.1.9 |