lcsEthLinkOAMPortPeerMTUSize
LCOS-SX-MIB ·
.1.3.6.1.4.1.2356.14.2.29.2.1.20
Object
column
SNMPv2-TCDisplayString
It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used.
Context
- MIB
- LCOS-SX-MIB
- OID
.1.3.6.1.4.1.2356.14.2.29.2.1.20- Type
- column
- Access
- readonly
- Status
- current
- Parent
- lcsEthLinkOAMPortDetailStatusEntry
- Table
- lcsEthLinkOAMPortDetailStatusTable
- Siblings
- 23
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lcsEthLinkOAMPortDetailStatusIndex Index | column | Integer32 | .1.3.6.1.4.1.2356.14.2.29.2.1.1 |
| lcsEthLinkOAMPortLocalMTUSize It represents the largest OAMPDU, in octets, supported by the DTE.
This value is compared to the remotes Maximum PDU Size and the smaller of the two is used. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.29.2.1.10 |
| lcsEthLinkOAMPortLocalMultiplexerState When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
Incase of discarding, the device discards all the non-OAMPDU's. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.11 |
| lcsEthLinkOAMPortLocalParserState When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
When in discarding sta… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.12 |
| lcsEthLinkOAMPortLocalOrganizationalUniqueIdentification 24-bit Organizationally Unique Identifier of the vendor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.13 |
| lcsEthLinkOAMPortLocalPDURevision It indicates the current revision of the Information TLV.
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
Upon… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.14.2.29.2.1.14 |
| lcsEthLinkOAMPortPeerMode The Mode in which the Link OAM is operating, Active or Passive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.15 |
| lcsEthLinkOAMPortPeerUnidirectionalOperationSupport This feature is not available to be configured by the user.
The status of this configuration is retrieved from the PHY. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.16 |
| lcsEthLinkOAMPortPeerRemoteLoopbackSupport If status is enabled, DTE is capable of OAM remote loopback mode. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.17 |
| lcsEthLinkOAMPortPeerLinkMonitoringSupport If status is enabled, DTE supports interpreting Link Events. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.18 |
| lcsEthLinkOAMPortPeerMIBRetrievalSupport If status ie enabled DTE supports sending Variable Response OAMPDUs. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.19 |
| lcsEthLinkOAMPortPDUPermission This field is available only for the Local DTE.
It displays the current permission rules set for the local DTE.
Possible values are Link fault, Receive only, Information exchang… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.2 |
| lcsEthLinkOAMPortPeerMultiplexerState When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer.
Incase of discarding, the device discards all the non-OAMPDU's. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.21 |
| lcsEthLinkOAMPortPeerParserState When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer.
When in loopback, Device is looping back non-OAMPDUs to the lower sublayer.
When in discarding sta… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.22 |
| lcsEthLinkOAMPortPeerOrganizationalUniqueIdentification 24-bit Organizationally Unique Identifier of the vendor. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.23 |
| lcsEthLinkOAMPortPDURevision It indicates the current revision of the Information TLV.
The value of this field shall start at zero and be incremented each time something in the Information TLV changes.
Upon… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.24 |
| lcsEthLinkOAMPortDiscoveryState Displays the current state of the discovery process.
Possible states are Fault state, Active state, Passive state,
SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.3 |
| lcsEthLinkOAMPortPeerMACAddress | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.4 |
| lcsEthLinkOAMPortLocalMode The Mode in which the Link OAM is operating, Active or Passive. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.5 |
| lcsEthLinkOAMPortLocalUnidirectionalOperationSupport This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.6 |
| lcsEthLinkOAMPortLocalRemoteLoopbackSupport If status is enabled, DTE is capable of OAM remote loopback mode. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.7 |
| lcsEthLinkOAMPortLocalLinkMonitoringSupport If status is enabled, DTE supports interpreting Link Events. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.8 |
| lcsEthLinkOAMPortLocalMIBRetrievalSupport If status ie enabled DTE supports sending Variable Response OAMPDUs. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.2356.14.2.29.2.1.9 |