lcsEthLinkOAMPortPDURevision

LCOS-SX-MIB · .1.3.6.1.4.1.2356.14.2.29.2.1.24
MIB view Table view

Object

column SNMPv2-TCDisplayString 
It indicates the current revision of the Information TLV. 
The value of this field shall start at zero and be incremented each time something in the Information TLV changes. 
Upon reception of an Information TLV from a peer, an OAM client may use this field to decide if it needs to be processed 
(an Information TLV that is identical to the previous Information TLV doesn't need to be parsed as nothing in it has changed).

Context

MIB
LCOS-SX-MIB
OID
.1.3.6.1.4.1.2356.14.2.29.2.1.24
Type
column
Access
readonly
Status
current
Parent
lcsEthLinkOAMPortDetailStatusEntry
Table
lcsEthLinkOAMPortDetailStatusTable
Siblings
23

Syntax

SNMPv2-TCDisplayString
Source
SNMPv2-TCDisplayString
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..255

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lcsEthLinkOAMPortDetailStatusIndex
Index
columnInteger32.1.3.6.1.4.1.2356.14.2.29.2.1.1
lcsEthLinkOAMPortLocalMTUSize
It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.29.2.1.10
lcsEthLinkOAMPortLocalMultiplexerState
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.11
lcsEthLinkOAMPortLocalParserState
When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding sta…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.12
lcsEthLinkOAMPortLocalOrganizationalUniqueIdentification
24-bit Organizationally Unique Identifier of the vendor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.13
lcsEthLinkOAMPortLocalPDURevision
It indicates the current revision of the Information TLV. The value of this field shall start at zero and be incremented each time something in the Information TLV changes. Upon…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.2356.14.2.29.2.1.14
lcsEthLinkOAMPortPeerMode
The Mode in which the Link OAM is operating, Active or Passive.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.15
lcsEthLinkOAMPortPeerUnidirectionalOperationSupport
This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.16
lcsEthLinkOAMPortPeerRemoteLoopbackSupport
If status is enabled, DTE is capable of OAM remote loopback mode.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.17
lcsEthLinkOAMPortPeerLinkMonitoringSupport
If status is enabled, DTE supports interpreting Link Events.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.18
lcsEthLinkOAMPortPeerMIBRetrievalSupport
If status ie enabled DTE supports sending Variable Response OAMPDUs.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.19
lcsEthLinkOAMPortPDUPermission
This field is available only for the Local DTE. It displays the current permission rules set for the local DTE. Possible values are Link fault, Receive only, Information exchang…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.2
lcsEthLinkOAMPortPeerMTUSize
It represents the largest OAMPDU, in octets, supported by the DTE. This value is compared to the remotes Maximum PDU Size and the smaller of the two is used.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.20
lcsEthLinkOAMPortPeerMultiplexerState
When in forwarding state, the Device is forwarding non-OAMPDUs to the lower sublayer. Incase of discarding, the device discards all the non-OAMPDU's.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.21
lcsEthLinkOAMPortPeerParserState
When in forwarding state, Device is forwarding non-OAMPDUs to higher sublayer. When in loopback, Device is looping back non-OAMPDUs to the lower sublayer. When in discarding sta…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.22
lcsEthLinkOAMPortPeerOrganizationalUniqueIdentification
24-bit Organizationally Unique Identifier of the vendor.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.23
lcsEthLinkOAMPortDiscoveryState
Displays the current state of the discovery process. Possible states are Fault state, Active state, Passive state, SEND_LOCAL_REMOTE_STATE, SEND_LOCAL_REMOTE_OK_STATE, SEND_ANY_…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.3
lcsEthLinkOAMPortPeerMACAddresscolumnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.4
lcsEthLinkOAMPortLocalMode
The Mode in which the Link OAM is operating, Active or Passive.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.5
lcsEthLinkOAMPortLocalUnidirectionalOperationSupport
This feature is not available to be configured by the user. The status of this configuration is retrieved from the PHY.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.6
lcsEthLinkOAMPortLocalRemoteLoopbackSupport
If status is enabled, DTE is capable of OAM remote loopback mode.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.7
lcsEthLinkOAMPortLocalLinkMonitoringSupport
If status is enabled, DTE supports interpreting Link Events.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.8
lcsEthLinkOAMPortLocalMIBRetrievalSupport
If status ie enabled DTE supports sending Variable Response OAMPDUs.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2356.14.2.29.2.1.9