slcNetEthAlternateGateway
LANTRONIX-SLC-MIB ·
.1.3.6.1.4.1.244.1.1.1.1.13
Object
scalar
SNMPv2-SMIIpAddress
The alternate gateway for routing non-Eth1 and non-Eth2 network traffic. The alternate gateway is used if an IP Address usually accessible through the default gateway fails to return one or more pings.
Context
- MIB
- LANTRONIX-SLC-MIB
- OID
.1.3.6.1.4.1.244.1.1.1.1.13- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- slcNetEth
- Siblings
- 23
Syntax
SNMPv2-SMIIpAddress
- Source
- SNMPv2-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| slcNetEthIfNumber The number of entries in the Ethernet interface table. | scalar | Integer32 | .1.3.6.1.4.1.244.1.1.1.1.1 |
| slcNetEthDNS2 The IPv4 Address of DNS server #2. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.1.10 |
| slcNetEthDNS3 The IPv4 Address of DNS server #3. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.1.11 |
| slcNetEthDomain The SLC domain name. | scalar | OctetString | .1.3.6.1.4.1.244.1.1.1.1.12 |
| slcNetEthPingIPAddress The IP Address to ping to determine if the alternate gateway
should be used. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.1.14 |
| slcNetEthPingInterface The Ethernet interface used to determine if the alternate
gateway should be used. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.1.15 |
| slcNetEthPingDelay The delay, in seconds, between pings used to determine if the
alternate gateway should be used. | scalar | seconds Integer32 | .1.3.6.1.4.1.244.1.1.1.1.16 |
| slcNetEthPingFailed The number of pings with no response required for the
alternate gateway to be used. | scalar | Integer32 | .1.3.6.1.4.1.244.1.1.1.1.17 |
| slcNetEthBonding The Ethernet network redundancy/load balancing setting. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.1.18 |
| slcNetEthIPv6 If enabled, IPv6 is enabled. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.1.19 |
| slcNetEthIfTable Table of Ethernet network entries. The number of entries is
given by the value of slcNetEthIfNumber. | table | - | .1.3.6.1.4.1.244.1.1.1.1.2 |
| slcNetEthGatewayIPv6 The default gateway for routing non-Eth1 and non-Eth2 IPv6
network traffic. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.244.1.1.1.1.20 |
| slcNetEthDNS1IPv6 The IPv6 Address of DNS server #1. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.244.1.1.1.1.21 |
| slcNetEthDNS2IPv6 The IPv6 Address of DNS server #2. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.244.1.1.1.1.22 |
| slcNetEthDNS3IPv6 The IPv6 Address of DNS server #3. | scalar | IPV6-TCIpv6Address | .1.3.6.1.4.1.244.1.1.1.1.23 |
| slcNetEthPreferIPv4DNS If enabled, IPv4 DNS records will be preferred when DNS
hostname lookups are performed. Otherwise IPv6 records will
be preferred (when IPv6 is enabled). | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.1.24 |
| slcNetEthGateway The gateway for routing non-Eth1 and non-Eth2 network IPv4
traffic. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.1.3 |
| slcNetEthGatewayPrecedence The gateway to give precedence to, if both a static gateway
is set, and a gateway is acquired via DHCP or a GPRS Modem. | scalar | Enumeration | .1.3.6.1.4.1.244.1.1.1.1.4 |
| slcNetEthKeepaliveStartProbes TCP keepalive timer: number of seconds to wait before sending
out the initial probe. | scalar | Integer32 | .1.3.6.1.4.1.244.1.1.1.1.5 |
| slcNetEthKeepaliveNumberOfProbes TCP keepalive timer: number of probes to send out after the
initial probe. | scalar | Integer32 | .1.3.6.1.4.1.244.1.1.1.1.6 |
| slcNetEthKeepaliveInterval TCP keepalive timer: number of seconds between probes. | scalar | Integer32 | .1.3.6.1.4.1.244.1.1.1.1.7 |
| slcNetEthIPForwarding If enabled, IP forwarding is used. | scalar | EnabledState | .1.3.6.1.4.1.244.1.1.1.1.8 |
| slcNetEthDNS1 The IPv4 Address of DNS server #1. | scalar | SNMPv2-SMIIpAddress | .1.3.6.1.4.1.244.1.1.1.1.9 |