aclIpv6RuleHopLimitValue
LANCOM-QOS-ACL-MIB ·
.1.3.6.1.4.1.2356.16.1.3.2.12.1.35
Object
column
r/w
Unsigned32
The Hop Limit field value used in ACl classification.
Context
- MIB
- LANCOM-QOS-ACL-MIB
- OID
.1.3.6.1.4.1.2356.16.1.3.2.12.1.35- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- aclIpv6RuleEntry
- Table
- aclIpv6RuleTable
- Siblings
- 36
Syntax
Unsigned32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| aclIpv6RuleIndex The index of this rule instance within an IPv6 ACL. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.1 |
| aclIpv6RuleSrcL4PortRangeStart The Source Port Number(Layer 4) range start. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.10 |
| aclIpv6RuleSrcL4PortRangeEnd The Source Port Number(Layer 4) range end. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.11 |
| aclIpv6RuleDestL4Port The Destination Port (Layer 4) used in ACl classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.12 |
| aclIpv6RuleDestL4PortRangeStart The Destination Port (Layer 4) starting range used in ACL classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.13 |
| aclIpv6RuleDestL4PortRangeEnd The Destination Port (Layer 4) ending range used in ACL classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.14 |
| aclIpv6RuleStatus Status of this instance.
active(1) - this ACL Rule is active
createAndGo(4) - set to this value to create an instance
destroy(6) - set to this value to delete an instance | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2356.16.1.3.2.12.1.15 |
| aclIpv6RuleFlowLabel Flow label is 20-bit number that is unique to an IPv6 packet, used by end
stations to signify quality-of-service handling in routers. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.16 |
| aclIpv6RuleIPDSCP The Differentiated Services Code Point value. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.17 |
| aclRuleSrcIpv6Prefix The Ipv6 Prefix Address configured on the Service Port. | column | Ipv6AddressPrefix | .1.3.6.1.4.1.2356.16.1.3.2.12.1.18 |
| aclRuleSrcIpv6PrefixLength The Prefix Length. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.19 |
| aclIpv6RuleAction The type of action this IPv6 ACL rule should perform. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.3.2.12.1.2 |
| aclRuleDstIpv6Prefix The Ipv6 Prefix Address configured on the Service Port. | column | Ipv6AddressPrefix | .1.3.6.1.4.1.2356.16.1.3.2.12.1.20 |
| aclRuleDstIpv6PrefixLength The Prefix Length. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.21 |
| aclIpv6RuleTimeRangeName Name of the time range, that the ACL rule
has referenced.It must start with alphabet and shall consist of
1 to 31 alphanumeric characters. | column | OctetString | .1.3.6.1.4.1.2356.16.1.3.2.12.1.22 |
| aclIpv6RuleTimeRangeStatus Flag that indicates the ACL rule status.
If the status is active, it implies that the ACL rule is in effect.
If the status is inactive, it implies that the ACL rule is not in effe… | column | Enumeration | .1.3.6.1.4.1.2356.16.1.3.2.12.1.23 |
| aclIpv6RuleRateLimitCrate Committed rate attribute statement value, specified in kbps. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.24 |
| aclIpv6RuleRateLimitCburst Committed burst size attribute statement value, specified in kbytes. | column | AclBurstSize | .1.3.6.1.4.1.2356.16.1.3.2.12.1.25 |
| aclIpv6RuleRedirectExtAgentId A non-zero value indicates the external control plane
application agentId to which all inbound packets matching
this ACL rule are directed. A value of zero means redirection
is… | column | Unsigned32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.26 |
| aclIpv6RuleIcmpType ACL rule matches on the specified ICMP type. All values
from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.27 |
| aclIpv6RuleIcmpCode ACL rule matches on the specified ICMP code. All values
from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.28 |
| aclIpv6RuleRouting Flag to indicate the ACL rule to match on packets
with routing extention header | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.29 |
| aclIpv6RuleLogging Flag to indicate that the ACL rule is being logged.
A hardware count of the number of times this rule is
hit is reported via the aclTrapRuleLogEvent notification.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.3 |
| aclIpv6RuleFragments Flag to indicate the ACL rule to match if the packets
with fragments extention header | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.30 |
| aclIpv6RuleEstablished Flag to indicate the ACL rule to match on TCP packets that
has either RST or ACK bits set in the TCP header | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.31 |
| aclIpv6RuleIsDuplicated Read-only object, which verifies whether the specified ACL rule is duplicated.
If the rule is duplicated then ir is recommended to remove it. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.32 |
| aclIpv6RuleHitCount Number of times the ACL rule was hit for IPv6 ACL. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.33 |
| aclIpv6RuleCounterClear Clears the counter of the specified rule within an Ipv6 aceess list. | column | Enumeration | .1.3.6.1.4.1.2356.16.1.3.2.12.1.34 |
| aclIpv6RuleMirrorExtAgentId A non-zero value indicates the external control plane
application agentId to which all inbound packets matching
this ACL rule are copied. A value of zero means mirroring
is not… | column | Unsigned32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.36 |
| aclIpv6RuleSflowSampling A value of true indicates that sFlow sampling is enabled on
this IPv6 ACL and all inbound packets matching this ACL rule
are copied to external sFlow remote agent hardware. A v… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.37 |
| aclIpv6RuleAssignQueueId Queue identifier to which all inbound packets matching this
ACL rule are directed. This object defaults to the standard
queue assignment for user priority 0 traffic per the IEEE… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.4 |
| aclIpv6RuleRedirectIntf A non-zero value indicates the external ifIndex to which all
inbound packets matching this Ipv6 ACL rule are directed. A
value of zero means packet redirection is not in effect… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2356.16.1.3.2.12.1.5 |
| aclIpv6RuleMirrorIntf A non-zero value indicates the external ifIndex to which all
inbound packets matching this IPv6 ACL rule are copied. A
value of zero means packet mirroring is not in effect, wh… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.2356.16.1.3.2.12.1.6 |
| aclIpv6RuleMatchEvery Flag to indicate that the ACL rule is defined to match on every IP packet,
regardless of content. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2356.16.1.3.2.12.1.7 |
| aclIpv6RuleProtocol icmp - 1
igmp - 2
ip - 4
tcp - 6
udp - 17
All values from 1 to 255 are valid. | column | Integer32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.8 |
| aclIpv6RuleSrcL4Port The Source Port Number (Layer 4) used in the ACL Classification. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2356.16.1.3.2.12.1.9 |