juniSonetPathRowStatus
Juniper-UNI-SONET-MIB ·
.1.3.6.1.4.1.4874.2.2.7.2.3.1.6
Object
Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniSonetPathRowStatus
juniSonetPathSpeed
juniSonetPathHierarchy
juniSonetPathLowerIfIndex
The logical channel may optionally be specified. If it is not specified
an unused logical channel value will be assigned by the system.
juniSonetPathLogicalChannel
In addition, when creating an entry the following conditions must hold:
A value for juniSonetPathIfIndex must have been determined
previously, by reading juniSonetPathNextIfIndex.
The interface identified by the juniSonetPathLowerIfIndex must
exist.
The juniSonetPathSpeed must be consistent with the speed for the
channel specified by the juniSonetPathHierarchy, based on the speed
of the interface identified by the juniSonetPathLowerIfIndex.
A corresponding entry in ifTable/ifXTable/juniIfTable is created/
destroyed as a result of creating/destroying an entry in this table.
Context
- MIB
- Juniper-UNI-SONET-MIB
- OID
.1.3.6.1.4.1.4874.2.2.7.2.3.1.6- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniSonetPathEntry
- Table
- juniSonetPathTable
- Siblings
- 10
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniSonetPathIfIndex The ifIndex of the SONET Path interface. When creating entries in this
table, suitable values for this object are determined by reading
juniSonetPathNextIfIndex. | column | IF-MIBInterfaceIndex | .1.3.6.1.4.1.4874.2.2.7.2.3.1.1 |
| juniSonetPathTriggerDelay The time delay (in milliseconds) before a defect is accepted as an
alarm for this SONET Path. | column | ms Integer32 | .1.3.6.1.4.1.4874.2.2.7.2.3.1.10 |
| juniSonetPathEventStatus This variable specifies which events have occurred in the current 15
minute interval. The value represents a vector of bits, each specifying
a unique event:
- Bit 0 Rising thr… | column | Unsigned32 | .1.3.6.1.4.1.4874.2.2.7.2.3.1.11 |
| juniSonetPathLogicalChannel The logical channel number assigned to this SONET Path. If the
underlying SONET interface does not support channelization, the value of
this object is zero. | column | JuniSonetLogicalPathChannel | .1.3.6.1.4.1.4874.2.2.7.2.3.1.2 |
| juniSonetPathSpeed The line speed associated with this SONET PATH. | column | JuniSonetLineSpeed | .1.3.6.1.4.1.4874.2.2.7.2.3.1.3 |
| juniSonetPathHierarchy The SONET Path hierarchy associated with this path. | column | JuniSonetPathHierarchy | .1.3.6.1.4.1.4874.2.2.7.2.3.1.4 |
| juniSonetPathLowerIfIndex The ifIndex of the interface over which this SONET Path interface is to
be layered - typically a SONET/SDH interface. A value of zero indicates
no layering. An implementation ma… | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.7.2.3.1.5 |
| juniSonetPathTriggerAlarms The path alarms that are used in the operational status calculation for
this SONET Path.
pathLOP When this bit is set, path LOP is used for operational
sta… | column | Bits | .1.3.6.1.4.1.4874.2.2.7.2.3.1.7 |
| juniSonetPathC2ByteOverrideFlag The path overhead c2 transmit override enable. If set to true(1),
juniSonetPathC2Byte override value must be specified. If set to
false(2), c2 byte will be automatically set by … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.7.2.3.1.8 |
| juniSonetPathC2ByteOverride The path overhead c2 transmit and expected value for this SONET Path. | column | JuniSonetPathC2ByteOverride | .1.3.6.1.4.1.4874.2.2.7.2.3.1.9 |