juniRateLimitProfileType
Juniper-POLICY-MIB ·
.1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16
Object
column
r/w
JuniRateLimitProfileType
The rate limit profile type (i.e. one-rate or two-rate). Defaults to two-rate, if not specified.
Context
- MIB
- Juniper-POLICY-MIB
- OID
.1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniRateLimitProfileEntry
- Table
- juniRateLimitProfileTable
- Siblings
- 16
Syntax
JuniRateLimitProfileType
- Source
- JuniRateLimitProfileType
- Base type
Enumeration
Values & Constraints
Type Values
1 | oneRate |
2 | twoRate |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniRateLimitProfileId The ID number of the rate limit profile (RLP) entry which is defined by
this row. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.1 |
| juniRateLimitConformedAction Action to be taken when the access rate exceeds the bounds of the
committed access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.10 |
| juniRateLimitExceededAction Action to be taken when the access rate exceeds the bounds of the peak
access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.11 |
| juniRateLimitCommittedMarkVal New IP precedence to be used when the juniRateLimitCommittedAction mark
action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.12 |
| juniRateLimitConformedMarkVal New IP prececence to be used when the
juniRateLimitExceedCommittedAction mark action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.13 |
| juniRateLimitExceededMarkVal New IP precedence to be used when the juniRateLimitExceedPeakAction
mark action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.14 |
| juniRateLimitMask Mask to be applied when executing a mark action. | column | Unsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.15 |
| juniRateLimitExcessBurst The excess committed access rate burst value in bytes. To be
configured only if rate limit profile type is one-rate. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.17 |
| juniRateLimitProfileRowStatus Controls creation/deletion of conceptual rows within this table.
All rowStatus modes are supported.
To create an entry in this table, the following e… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2 |
| juniRateLimitProfileName Specifies the name of the rate limit profile defined by this row. | column | OctetString | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.3 |
| juniRateLimitReferenceCount This object reflects the number of times a rate limit profile object is
referenced by policies. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.4 |
| juniRateLimitCommittedBps The committed access rate in bits per second. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.5 |
| juniRateLimitCommittedBurst The committed access rate burst value in bytes. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.6 |
| juniRateLimitExceedBps The peak access rate in bits per second. To be configured only if rate
limit profile type is two-rate. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.7 |
| juniRateLimitExceedBurst The peak access rate burst value in bytes. To be configured only if
rate limit profile type is two-rate. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.8 |
| juniRateLimitCommittedAction Action to be taken when the access rate is within the bounds of the
committed access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.9 |