juniRateLimitProfileRowStatus
Juniper-POLICY-MIB ·
.1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2
Object
Controls creation/deletion of conceptual rows within this table.
All rowStatus modes are supported.
To create an entry in this table, the following entry objects MUST be
explicitly configured:
juniRateLimitProfileName.
The rowStatus must be set to notInService in order to modify an
entry in this table. After making the desired changes you should
set the rowStatus to active to apply the changes.
Context
- MIB
- Juniper-POLICY-MIB
- OID
.1.3.6.1.4.1.4874.2.2.27.1.2.2.1.2- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniRateLimitProfileEntry
- Table
- juniRateLimitProfileTable
- Siblings
- 16
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniRateLimitProfileId The ID number of the rate limit profile (RLP) entry which is defined by
this row. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.1 |
| juniRateLimitConformedAction Action to be taken when the access rate exceeds the bounds of the
committed access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.10 |
| juniRateLimitExceededAction Action to be taken when the access rate exceeds the bounds of the peak
access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.11 |
| juniRateLimitCommittedMarkVal New IP precedence to be used when the juniRateLimitCommittedAction mark
action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.12 |
| juniRateLimitConformedMarkVal New IP prececence to be used when the
juniRateLimitExceedCommittedAction mark action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.13 |
| juniRateLimitExceededMarkVal New IP precedence to be used when the juniRateLimitExceedPeakAction
mark action is applied. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.14 |
| juniRateLimitMask Mask to be applied when executing a mark action. | column | Unsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.15 |
| juniRateLimitProfileType The rate limit profile type (i.e. one-rate or two-rate). Defaults to
two-rate, if not specified. | column | JuniRateLimitProfileType | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.16 |
| juniRateLimitExcessBurst The excess committed access rate burst value in bytes. To be
configured only if rate limit profile type is one-rate. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.17 |
| juniRateLimitProfileName Specifies the name of the rate limit profile defined by this row. | column | OctetString | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.3 |
| juniRateLimitReferenceCount This object reflects the number of times a rate limit profile object is
referenced by policies. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.4 |
| juniRateLimitCommittedBps The committed access rate in bits per second. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.5 |
| juniRateLimitCommittedBurst The committed access rate burst value in bytes. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.6 |
| juniRateLimitExceedBps The peak access rate in bits per second. To be configured only if rate
limit profile type is two-rate. | column | bits per second SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.7 |
| juniRateLimitExceedBurst The peak access rate burst value in bytes. To be configured only if
rate limit profile type is two-rate. | column | bytes SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.8 |
| juniRateLimitCommittedAction Action to be taken when the access rate is within the bounds of the
committed access rate. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.27.1.2.2.1.9 |