juniIsisSysOrigL2LSPBuffSize
Juniper-ISIS-MIB ·
.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23
Object
column
obsolete
r/w
LSPBuffSize
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
Context
- MIB
- Juniper-ISIS-MIB
- OID
.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23- Type
- column
- Access
- readwrite
- Status
- obsolete
- Parent
- juniIsisSysEntry
- Table
- juniIsisSysTable
- Siblings
- 44
Syntax
LSPBuffSize
- Source
- LSPBuffSize
- Base type
Integer32
Values & Constraints
Type Constraints
range: 512..9180
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniIsisSysInstance The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1 |
| juniIsisSysMinL2LSPGenInt Minimum interval, in seconds, between successive generation of L2 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10 |
| juniIsisSysPollESHelloRate The value, in seconds, to be used for the suggested ES configuration
timer in ISH PDUs when soliciting the ES configuration. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11 |
| juniIsisSysWaitTime Number of seconds to delay in waiting state before entering on state.
This object follows the resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12 |
| juniIsisSysOperState The operational state of this instance of the Integrated IS-IS
protocol. Setting this object to the value on when its current value is
off enables operation of this instance of t… | column | OperState | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13 |
| juniIsisSysL1State The state of the Level 1 database. | column | LevelState | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14 |
| juniIsisSysCorrLSPs Number of corrupted LSPs detected. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15 |
| juniIsisSysLSPL1DbaseOloads Number of times the LSP L1 database has become overloaded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16 |
| juniIsisSysManAddrDropFromAreas Number of times a manual address has been dropped from the area. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17 |
| juniIsisSysAttmptToExMaxSeqNums Number of times the IS has attempted to exceed the maximum sequence
number. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18 |
| juniIsisSysSeqNumSkips Number of times a sequence number skip has occurred. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19 |
| juniIsisSysVersion The version number of the IS-IS protocol to which this instance
conforms. This value must be set by the implementation when the row is
valid. | column | OctetString | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2 |
| juniIsisSysOwnLSPPurges Number of times a zero-aged copy of the system's own LSP is received
from some other node. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20 |
| juniIsisSysIDFieldLenMismatches Number of times a PDU is received with a different value for ID field
length to that of the receiving system. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21 |
| juniIsisSysMaxAreaAddrMismatches Number of times a PDU is received with a different value for
MaximumAreaAddresses from that of the receiving system. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22 |
| juniIsisSysL2State The state of the Level 2 database. | column | LevelState | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24 |
| juniIsisSysLSPL2DbaseOloads Number of times the Level 2 LSP database has become overloaded. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25 |
| juniIsisSysAuthFails The number of authentication failures recognized by this instance of
the protocol. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26 |
| juniIsisSysLSPIgnoreErrors If true, allow the router to ignore IS-IS link state packets (LSPs)
that are received with internal checksum errors rather than purging the
LSPs. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27 |
| juniIsisSysMaxAreaCheck When on, enables checking of maximum area addresses per IS version of
ISO10589. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28 |
| juniIsisSysSetOverloadBit Isis overload bit | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29 |
| juniIsisSysType The type of this instance of the Integrated IS-IS protocol. This
object follows the replaceOnlyWhileDisabled behaviour. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3 |
| juniIsisSysSetOverloadBitStartupDuration Specifies the length in time of seconds to set the overload bit from
startup. This object must be set together with
juniIsisSysSetOverloadBit, otherwise the agent will return zer… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30 |
| juniIsisSysMaxLspLifetime Specifies the maximum time (in seconds) a LSP will remain in the box
without being refreshed before being considered invalid. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31 |
| juniIsisSysL1SpfInterval Minimum interval, in seconds, between level 1 SPF calculations. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32 |
| juniIsisSysL2SpfInterval Minimum interval, in seconds, between level 2 SPF calculations. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33 |
| juniIsisSysIshHoldTime Specify a holdtime advertised in ESH/ISH PDUs. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34 |
| juniIsisSysIshConfigTimer Specify the rate of transmission for ESH and ISH packets. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35 |
| juniIsisSysDistributeDomainWide When on, enables distribution of prefixes throughout a multi-level
domain. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36 |
| juniIsisSysDistance The weight applied to IS-IS routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37 |
| juniIsisSysL1MetricStyle Specifies the type of IP reachability TLV to advertise in level 1
LSPs. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38 |
| juniIsisSysL2MetricStyle Specifies the type of IP reachability TLV to advertise in level 2
LSPs. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39 |
| juniIsisSysID The ID for this instance of the Integrated IS-IS protocol. This value
is appended to each of the instance's area addresses to form the Network
Entity Titles valid for this instan… | column | SystemID | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4 |
| juniIsisSysIsoRouteTag The ISO routing area tag. | column | OctetString | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40 |
| juniIsisSysMplsTeLevel Select flooding of MPLS traffic engineering link information into the
specified ISIS level. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41 |
| juniIsisSysMplsTeRtrIdIfIndex Configure the stable router interface ID to designate it as TE capable.
A value of zero is used to remove any configured router interface ID. | column | IF-MIBInterfaceIndexOrZero | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42 |
| juniIsisSysMplsTeSpfUseAnyBestPath Configure whether or not to consider spf paths when alternate
tunnel path exists | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43 |
| juniIsisSysReferenceBandwidth Configure the reference bandwitdth used to calculate the link cost in
bits per second.If the reference bandwidth is greater than the maximum
value reportable by this object then… | column | SNMPv2-SMIGauge32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44 |
| juniIsisSysHighReferenceBandwidth Configure the reference bandwitdth in mega bits per second.
It is used to calculate the link cost. | column | Unsigned32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45 |
| juniIsisSysMaxPathSplits Maximum number of paths with equal routing metric value which it is
permitted to split between. This object follows the
replaceOnlyWhileDisabled behaviour. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5 |
| juniIsisSysMaxLSPGenInt Maximum interval, in seconds, between generated LSPs by this instance.
This object follows the resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6 |
| juniIsisSysOrigLSPBuffSize The maximum size of LSPs and SNPs originated by this instance.
This object follows the replaceOnlyWhileDisabled behaviour. | column | LSPBuffSize | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7 |
| juniIsisSysMaxAreaAddresses The maximum number of area addresses to be permitted for the area in
which this instance exists. Note that all Intermediate Systems in the
same area must have the same value conf… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8 |
| juniIsisSysMinL1LSPGenInt Minimum interval, in seconds, between successive generation of L1 LSPs
with the same LSPID by this instance. This object follows the
resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9 |