juniIsisSysMaxPathSplits

Juniper-ISIS-MIB · .1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5
MIB view Table view

Object

column r/w Integer32 
Maximum number of paths with equal routing metric value which it is
permitted to split between.  This object follows the
replaceOnlyWhileDisabled behaviour.

Context

MIB
Juniper-ISIS-MIB
OID
.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.5
Type
column
Access
readwrite
Status
current
Parent
juniIsisSysEntry
Table
juniIsisSysTable
Siblings
44

Syntax

Integer32

Values & Constraints

Object Constraints
range: 1-16

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniIsisSysInstance
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.1
juniIsisSysMinL2LSPGenInt
Minimum interval, in seconds, between successive generation of L2 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.10
juniIsisSysPollESHelloRate
The value, in seconds, to be used for the suggested ES configuration timer in ISH PDUs when soliciting the ES configuration.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.11
juniIsisSysWaitTime
Number of seconds to delay in waiting state before entering on state. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.12
juniIsisSysOperState
The operational state of this instance of the Integrated IS-IS protocol. Setting this object to the value on when its current value is off enables operation of this instance of t…
columnOperState.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.13
juniIsisSysL1State
The state of the Level 1 database.
columnLevelState.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.14
juniIsisSysCorrLSPs
Number of corrupted LSPs detected.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.15
juniIsisSysLSPL1DbaseOloads
Number of times the LSP L1 database has become overloaded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.16
juniIsisSysManAddrDropFromAreas
Number of times a manual address has been dropped from the area.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.17
juniIsisSysAttmptToExMaxSeqNums
Number of times the IS has attempted to exceed the maximum sequence number.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.18
juniIsisSysSeqNumSkips
Number of times a sequence number skip has occurred.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.19
juniIsisSysVersion
The version number of the IS-IS protocol to which this instance conforms. This value must be set by the implementation when the row is valid.
columnOctetString.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.2
juniIsisSysOwnLSPPurges
Number of times a zero-aged copy of the system's own LSP is received from some other node.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.20
juniIsisSysIDFieldLenMismatches
Number of times a PDU is received with a different value for ID field length to that of the receiving system.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.21
juniIsisSysMaxAreaAddrMismatches
Number of times a PDU is received with a different value for MaximumAreaAddresses from that of the receiving system.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.22
juniIsisSysOrigL2LSPBuffSize obsolete
The maximum size of Level 2 LSPs and SNPs originated by this system. This object follows the replaceOnlyWhileDisabled behaviour.
columnLSPBuffSize.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.23
juniIsisSysL2State
The state of the Level 2 database.
columnLevelState.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.24
juniIsisSysLSPL2DbaseOloads
Number of times the Level 2 LSP database has become overloaded.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.25
juniIsisSysAuthFails
The number of authentication failures recognized by this instance of the protocol.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.26
juniIsisSysLSPIgnoreErrors
If true, allow the router to ignore IS-IS link state packets (LSPs) that are received with internal checksum errors rather than purging the LSPs.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.27
juniIsisSysMaxAreaCheck
When on, enables checking of maximum area addresses per IS version of ISO10589.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.28
juniIsisSysSetOverloadBit
Isis overload bit
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.29
juniIsisSysType
The type of this instance of the Integrated IS-IS protocol. This object follows the replaceOnlyWhileDisabled behaviour.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.3
juniIsisSysSetOverloadBitStartupDuration
Specifies the length in time of seconds to set the overload bit from startup. This object must be set together with juniIsisSysSetOverloadBit, otherwise the agent will return zer…
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.30
juniIsisSysMaxLspLifetime
Specifies the maximum time (in seconds) a LSP will remain in the box without being refreshed before being considered invalid.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.31
juniIsisSysL1SpfInterval
Minimum interval, in seconds, between level 1 SPF calculations.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.32
juniIsisSysL2SpfInterval
Minimum interval, in seconds, between level 2 SPF calculations.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.33
juniIsisSysIshHoldTime
Specify a holdtime advertised in ESH/ISH PDUs.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.34
juniIsisSysIshConfigTimer
Specify the rate of transmission for ESH and ISH packets.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.35
juniIsisSysDistributeDomainWide
When on, enables distribution of prefixes throughout a multi-level domain.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.36
juniIsisSysDistance
The weight applied to IS-IS routes.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.37
juniIsisSysL1MetricStyle
Specifies the type of IP reachability TLV to advertise in level 1 LSPs.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.38
juniIsisSysL2MetricStyle
Specifies the type of IP reachability TLV to advertise in level 2 LSPs.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.39
juniIsisSysID
The ID for this instance of the Integrated IS-IS protocol. This value is appended to each of the instance's area addresses to form the Network Entity Titles valid for this instan…
columnSystemID.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.4
juniIsisSysIsoRouteTag
The ISO routing area tag.
columnOctetString.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.40
juniIsisSysMplsTeLevel
Select flooding of MPLS traffic engineering link information into the specified ISIS level.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.41
juniIsisSysMplsTeRtrIdIfIndex
Configure the stable router interface ID to designate it as TE capable. A value of zero is used to remove any configured router interface ID.
columnIF-MIBInterfaceIndexOrZero.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.42
juniIsisSysMplsTeSpfUseAnyBestPath
Configure whether or not to consider spf paths when alternate tunnel path exists
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.43
juniIsisSysReferenceBandwidth
Configure the reference bandwitdth used to calculate the link cost in bits per second.If the reference bandwidth is greater than the maximum value reportable by this object then…
columnSNMPv2-SMIGauge32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.44
juniIsisSysHighReferenceBandwidth
Configure the reference bandwitdth in mega bits per second. It is used to calculate the link cost.
columnUnsigned32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.45
juniIsisSysMaxLSPGenInt
Maximum interval, in seconds, between generated LSPs by this instance. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.6
juniIsisSysOrigLSPBuffSize
The maximum size of LSPs and SNPs originated by this instance. This object follows the replaceOnlyWhileDisabled behaviour.
columnLSPBuffSize.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.7
juniIsisSysMaxAreaAddresses
The maximum number of area addresses to be permitted for the area in which this instance exists. Note that all Intermediate Systems in the same area must have the same value conf…
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.8
juniIsisSysMinL1LSPGenInt
Minimum interval, in seconds, between successive generation of L1 LSPs with the same LSPID by this instance. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.1.1.1.9