juniIsisCircMeshGroupEnabled
Juniper-ISIS-MIB ·
.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42
Object
column
r/w
Enumeration
Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flooded to another circuit in the same mesh group.
Context
- MIB
- Juniper-ISIS-MIB
- OID
.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniIsisCircEntry
- Table
- juniIsisCircTable
- Siblings
- 44
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | inactive |
2 | blocked |
3 | set |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniIsisCircSysInstance The unique identifier of the Integrated IS-IS instance to which this
row corresponds. This object follows the index behaviour. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1 |
| juniIsisCircL1ErrorMetric The error metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10 |
| juniIsisCircExtDomain If true, suppress normal transmission of and interpretation of
Intra-domain ISIS PDUs on this circuit. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11 |
| juniIsisCircAdjChanges The number of times an adjacency state change has occurred on this
circuit. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12 |
| juniIsisCircInitFails The number of times initialization of this circuit has failed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13 |
| juniIsisCircRejAdjs The number of times an adjacency has been rejected on this circuit. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14 |
| juniIsisCircOutCtrlPDUs The number of IS-IS control PDUs sent on this circuit. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15 |
| juniIsisCircInCtrlPDUs The number of IS-IS control PDUs received on this circuit. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16 |
| juniIsisCircIDFieldLenMismatches The number of times an IS-IS control PDU with an ID field length
different to that for this system has been received. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17 |
| juniIsisCircL2DefaultMetric The default metric value of this circuit for level 2 traffic. | column | JuniDefaultMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18 |
| juniIsisCircL2DelayMetric The delay metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19 |
| juniIsisCircIfIndex The value of ifIndex for the interface to which this circuit
corresponds. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2 |
| juniIsisCircL2ExpenseMetric The expense metric value of this circuit for level 2 traffic. The
value of zero is reserved to indicate that this metric is not
supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20 |
| juniIsisCircL2ErrorMetric The error metric value of this circuit for level 2 traffic. The value
of zero is reserved to indicate that this metric is not supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21 |
| juniIsisCircManL2Only When true, indicates that this circuit is to be used only for level 2.
This object follows the replaceOnlyWhileDisabled behaviour. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22 |
| juniIsisCircL1ISPriority The priority for becoming LAN Level 1 Deignated Intermediate System on
a broadcast circuit. | column | ISPriority | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23 |
| juniIsisCircL1CircID The LAN ID allocated by the LAN Level 1 Designated Intermediate System.
Where this system is not aware of the value (because it is not
participating in the Level 1 Designated Inte… | column | CircuitID | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24 |
| juniIsisCircL1DesIS The ID of the LAN Level 1 Designated Intermediate System on this
circuit. If, for any reason this system is not partaking in the
relevant Designated Intermediate System election … | column | SystemID | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25 |
| juniIsisCircLANL1DesISChanges The number of times the LAN Level 1 Designated Intermediate System has
changed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26 |
| juniIsisCircL2ISPriority The priority for becoming LAN level 2 Designated Intermediate System. | column | ISPriority | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27 |
| juniIsisCircL2CircID The LAN ID allocated by the LAN Level 2 Designated Intermediate System.
Where this system is not aware of this value (because it is not
participating in the Level 2 Designated Int… | column | CircuitID | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28 |
| juniIsisCircL2DesIS The ID of the LAN Level 2 Designated Intermediate System on this
circuit. If, for any reason, this system is not partaking in the
relevant Designated Intermediate System election… | column | SystemID | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29 |
| juniIsisCircLocalID An identification that can be used in protocol packets to identify a
circuit. Implementations may devise ways to assure that this value is
suitable for the circuit it is used on.… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3 |
| juniIsisCircLANL2DesISChanges The number of times the LAN Level 2 Designated Intermediate System has
changed. | column | SNMPv2-SMICounter32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30 |
| juniIsisCircMCAddr Specifies which type of multicast address will be used for sending
HELLO PDUs on this circuit. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31 |
| juniIsisCircPtToPtCircID The ID of the circuit allocated during initialization. If no value has
been negotiated (either because the adjacency is to an End System, or
because initialization has not yet su… | column | CircuitID | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32 |
| juniIsisCircL1HelloTimer Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. It is also used as the period between Hellos on point to
point circuits. This object follows the re… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33 |
| juniIsisCircL2HelloTimer Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess
networks. This object follows the resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34 |
| juniIsisCircL1HelloMultiplier This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35 |
| juniIsisCircL2HelloMultiplier This value is multiplied by the corresponding HelloTimer and the result
in seconds (rounded up) is used as the holding time in transmitted
hellos, to be used by receivers of hello… | column | Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36 |
| juniIsisCircMinLSPTransInt Minimum interval, in milliseconds, between transmission of LSPs on a
circuit. This object follows the resettingTimer behaviour. This timer
shall be capable of a resolution not c… | column | milliseconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37 |
| juniIsisCircMinLSPReTransInt Minimum interval, in seconds, between re-transmission of an Level 1 or
2 LSP. This object follows the resettingTimer behaviour. | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38 |
| juniIsisCircL1CSNPInterval Interval of time, in seconds, between transmission of Level 1 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to … | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39 |
| juniIsisCircOperState The operational state of the circuit. This object follows the
operationalState behaviour. | column | OperState | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4 |
| juniIsisCircL2CSNPInterval Interval of time, in seconds, between transmission of Level 2 CSNPs on
multiaccess networks if this router is the designated router. On
point-to-point networks the default is to n… | column | seconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40 |
| juniIsisCircLSPThrottle Minimal interval of time, in milliseconds, between retransmissions of
LSPs on a point to point interface. | column | milliseconds Integer32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41 |
| juniIsisCircMeshGroup Circuits in the same mesh group act as a virtual multiaccess network.
LSPs seen on one circuit in a mesh group will not be flooded to another
circuit in the same mesh group. If j… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43 |
| juniIsisCircLevel The type of this circuit. This object follows the
replaceOnlyWhileDisabled behavior. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44 |
| juniIsisCircState The operational state of the circuit. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45 |
| juniIsisCircRowStatus The existence state of this circuit. This object follows the RowStatus
behaviour. | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5 |
| juniIsisCircType The type of the circuit. This object follows the
replaceOnlyWhileDisabled behaviour. The type specified must be
compatible with the type of the interface defined by the value of… | column | Enumeration | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6 |
| juniIsisCircL1DefaultMetric The default metric value of this circuit for Level 1 traffic. | column | JuniDefaultMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7 |
| juniIsisCircL1DelayMetric The delay metric value of this circuit for Level 1 traffic. The value
of zero is reserved to indicate that this metric is not supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8 |
| juniIsisCircL1ExpenseMetric The expense metric value of this circuit for Level 1 traffic. The
value of zero is reserved to indicate that this metric is not
supported. | column | OtherMetric | .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9 |