juniIsisCircMeshGroup

Juniper-ISIS-MIB · .1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43
MIB view Table view

Object

column r/w SNMPv2-SMIUnsigned32 
Circuits in the same mesh group act as a virtual multiaccess network.
LSPs seen on one circuit in a mesh group will not be flooded to another
circuit in the same mesh group.  If juniIsisCircMeshGroupEnabled is
false, this value is ignored. Default value returned as 0 has no significance
for this variable.

Context

MIB
Juniper-ISIS-MIB
OID
.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.43
Type
column
Access
readwrite
Status
current
Parent
juniIsisCircEntry
Table
juniIsisCircTable
Siblings
44

Syntax

SNMPv2-SMIUnsigned32
Source
SNMPv2-SMIUnsigned32
Base type
Unsigned32

Values & Constraints

Type Constraints
range: 0..4294967295

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniIsisCircSysInstance
The unique identifier of the Integrated IS-IS instance to which this row corresponds. This object follows the index behaviour.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.1
juniIsisCircL1ErrorMetric
The error metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.10
juniIsisCircExtDomain
If true, suppress normal transmission of and interpretation of Intra-domain ISIS PDUs on this circuit.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.11
juniIsisCircAdjChanges
The number of times an adjacency state change has occurred on this circuit.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.12
juniIsisCircInitFails
The number of times initialization of this circuit has failed.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.13
juniIsisCircRejAdjs
The number of times an adjacency has been rejected on this circuit.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.14
juniIsisCircOutCtrlPDUs
The number of IS-IS control PDUs sent on this circuit.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.15
juniIsisCircInCtrlPDUs
The number of IS-IS control PDUs received on this circuit.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.16
juniIsisCircIDFieldLenMismatches
The number of times an IS-IS control PDU with an ID field length different to that for this system has been received.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.17
juniIsisCircL2DefaultMetric
The default metric value of this circuit for level 2 traffic.
columnJuniDefaultMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.18
juniIsisCircL2DelayMetric
The delay metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.19
juniIsisCircIfIndex
The value of ifIndex for the interface to which this circuit corresponds.
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.2
juniIsisCircL2ExpenseMetric
The expense metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.20
juniIsisCircL2ErrorMetric
The error metric value of this circuit for level 2 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.21
juniIsisCircManL2Only
When true, indicates that this circuit is to be used only for level 2. This object follows the replaceOnlyWhileDisabled behaviour.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.22
juniIsisCircL1ISPriority
The priority for becoming LAN Level 1 Deignated Intermediate System on a broadcast circuit.
columnISPriority.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.23
juniIsisCircL1CircID
The LAN ID allocated by the LAN Level 1 Designated Intermediate System. Where this system is not aware of the value (because it is not participating in the Level 1 Designated Inte…
columnCircuitID.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.24
juniIsisCircL1DesIS
The ID of the LAN Level 1 Designated Intermediate System on this circuit. If, for any reason this system is not partaking in the relevant Designated Intermediate System election …
columnSystemID.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.25
juniIsisCircLANL1DesISChanges
The number of times the LAN Level 1 Designated Intermediate System has changed.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.26
juniIsisCircL2ISPriority
The priority for becoming LAN level 2 Designated Intermediate System.
columnISPriority.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.27
juniIsisCircL2CircID
The LAN ID allocated by the LAN Level 2 Designated Intermediate System. Where this system is not aware of this value (because it is not participating in the Level 2 Designated Int…
columnCircuitID.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.28
juniIsisCircL2DesIS
The ID of the LAN Level 2 Designated Intermediate System on this circuit. If, for any reason, this system is not partaking in the relevant Designated Intermediate System election…
columnSystemID.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.29
juniIsisCircLocalID
An identification that can be used in protocol packets to identify a circuit. Implementations may devise ways to assure that this value is suitable for the circuit it is used on.…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.3
juniIsisCircLANL2DesISChanges
The number of times the LAN Level 2 Designated Intermediate System has changed.
columnSNMPv2-SMICounter32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.30
juniIsisCircMCAddr
Specifies which type of multicast address will be used for sending HELLO PDUs on this circuit.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.31
juniIsisCircPtToPtCircID
The ID of the circuit allocated during initialization. If no value has been negotiated (either because the adjacency is to an End System, or because initialization has not yet su…
columnCircuitID.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.32
juniIsisCircL1HelloTimer
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. It is also used as the period between Hellos on point to point circuits. This object follows the re…
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.33
juniIsisCircL2HelloTimer
Maximum period, in seconds, between Level 1 IIH PDUs on multiaccess networks. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.34
juniIsisCircL1HelloMultiplier
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello…
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.35
juniIsisCircL2HelloMultiplier
This value is multiplied by the corresponding HelloTimer and the result in seconds (rounded up) is used as the holding time in transmitted hellos, to be used by receivers of hello…
columnInteger32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.36
juniIsisCircMinLSPTransInt
Minimum interval, in milliseconds, between transmission of LSPs on a circuit. This object follows the resettingTimer behaviour. This timer shall be capable of a resolution not c…
columnmilliseconds SNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.37
juniIsisCircMinLSPReTransInt
Minimum interval, in seconds, between re-transmission of an Level 1 or 2 LSP. This object follows the resettingTimer behaviour.
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.38
juniIsisCircL1CSNPInterval
Interval of time, in seconds, between transmission of Level 1 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to …
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.39
juniIsisCircOperState
The operational state of the circuit. This object follows the operationalState behaviour.
columnOperState.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.4
juniIsisCircL2CSNPInterval
Interval of time, in seconds, between transmission of Level 2 CSNPs on multiaccess networks if this router is the designated router. On point-to-point networks the default is to n…
columnseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.40
juniIsisCircLSPThrottle
Minimal interval of time, in milliseconds, between retransmissions of LSPs on a point to point interface.
columnmilliseconds Integer32.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.41
juniIsisCircMeshGroupEnabled
Is this port a member of a mesh group, or blocked? Circuits in the same mesh group act as a virtual multiaccess network. LSPs seen on one circuit in a mesh group will not be flo…
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.42
juniIsisCircLevel
The type of this circuit. This object follows the replaceOnlyWhileDisabled behavior.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.44
juniIsisCircState
The operational state of the circuit.
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.45
juniIsisCircRowStatus
The existence state of this circuit. This object follows the RowStatus behaviour.
columnSNMPv2-TCRowStatus.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.5
juniIsisCircType
The type of the circuit. This object follows the replaceOnlyWhileDisabled behaviour. The type specified must be compatible with the type of the interface defined by the value of…
columnEnumeration.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.6
juniIsisCircL1DefaultMetric
The default metric value of this circuit for Level 1 traffic.
columnJuniDefaultMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.7
juniIsisCircL1DelayMetric
The delay metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.8
juniIsisCircL1ExpenseMetric
The expense metric value of this circuit for Level 1 traffic. The value of zero is reserved to indicate that this metric is not supported.
columnOtherMetric.1.3.6.1.4.1.4874.2.2.38.1.2.1.1.9