juniIpv6ProfileSetMap

Juniper-IPV6-PROFILE-MIB · .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2
MIB view Table view

Object

column r/w Juniper-TCJuniSetMap 
A bitmap representing which objects in this entry have been explicitly
configured.  See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
              
The INDEX object(s) and this object are excluded from representation
(i.e. their bits are never set).
              
When a SET request does not explicitly configure JuniSetMap, bits in
JuniSetMap are set as a side-effect of configuring other profile
attributes in the same entry.
              
If, however, a SET request explicitly configures JuniSetMap, the
explicitly configured value overrides 1) any previous bit settings, and
2) any simultaneous 'side-effect' settings that would otherwise occur.
              
Once set, bits can only be cleared by explicitly configuring
JuniSetMap.

Context

MIB
Juniper-IPV6-PROFILE-MIB
OID
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2
Type
column
Access
readwrite
Status
current
Parent
juniIpv6ProfileEntry
Table
juniIpv6ProfileTable
Siblings
20

Syntax

Juniper-TCJuniSetMap
Source
Juniper-TCJuniSetMap
Base type
OctetString

Values & Constraints

Type Constraints
range: 0..8

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
juniIpv6ProfileId
The integer identifier associated with this profile. A value for this identifier is determined by locating or creating a profile name in the juniProfileNameTable.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.1
juniIpv6ProfileNdManagedConfig
Enable/disable ND managed config for this IPv6 network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.10
juniIpv6ProfileNdOtherConfig
Enable/disable ND other config for this IPv6 network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.11
juniIpv6ProfileNdSuppressRa
Enable/disable ND suppress RA for this IPv6 network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.12
juniIpv6ProfileNdRaInterval
The configured interval between IPv6 RA transmissions on the interface.
columnInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.13
juniIpv6ProfileNdRaLifeTime
The configured RA lifetime for this IPv6 network interface.
columnInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.14
juniIpv6ProfileNdReachableTime
The configured RA reachable time for this IPv6 network interface.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.15
juniIpv6ProfileNdPrefix
The prefix associated with the this interface.
columnIPV6-TCIpv6AddressPrefix.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.16
juniIpv6ProfileNdPrefixLength
The length of the prefix (in bits).
columnInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.17
juniIpv6ProfileNdPrefixOnLinkFlag
This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.18
juniIpv6ProfileNdPrefixAutonomousFlag
Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface addres…
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.19
juniIpv6ProfileNdPrefixPreferredLifetime
It is the length of time in seconds that this prefix will remain preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.20
juniIpv6ProfileNdPrefixValidLifetime
It is the length of time in seconds that this prefix will remain valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address gen…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.21
juniIpv6ProfileRouterName
The virtual router to which an IPv6 interface configured by this profile will be assigned, if other mechanisms do not otherwise specify a virtual router assignment.
columnJuniper-TCJuniName.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.3
juniIpv6ProfileIpv6Addr
An IPv6 address to be used by an IPv6 interface configured by this profile. This object will have a value of 0::0 for an unnumbered interface.
columnINET-ADDRESS-MIBInetAddressIPv6.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.4
juniIpv6ProfileIpv6MaskLen
An IPv6 address mask length to be used by an IPv6 interface configured by this profile. This object will have a value of 0 for an unnumbered interface.
columnInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.5
juniIpv6ProfileMtu
The configured MTU size for this IPv6 network interface. If set to zero, the default MTU size, as determined by the underlying network media, is used.
columnInteger32.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.6
juniIpv6ProfileSrcAddrValidEnable
Enable/disable whether source addresses in received IPv6 packets are validated. Validation is performed by looking up the source IPv6 address in the routing database and determin…
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7
juniIpv6ProfileInheritNumString
The text identifier of the numbered interface, associated with the specified virtual router, whose IPv6 address is used as the source address when transmitting IPv6 packets on unn…
columnOctetString.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.8
juniIpv6ProfileNdEnabled
Enable/disable ND for this IPv6 network interface.
columnJuniper-TCJuniEnable.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.9