juniIpv6ProfileNdPrefixLength
Juniper-IPV6-PROFILE-MIB ·
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.17
Object
column
r/w
Integer32
The length of the prefix (in bits).
Context
- MIB
- Juniper-IPV6-PROFILE-MIB
- OID
.1.3.6.1.4.1.4874.2.2.68.1.1.1.1.17- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniIpv6ProfileEntry
- Table
- juniIpv6ProfileTable
- Siblings
- 20
Syntax
Integer32
Values & Constraints
Object Constraints
range: 1-128
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniIpv6ProfileId The integer identifier associated with this profile. A value for this
identifier is determined by locating or creating a profile name in the
juniProfileNameTable. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.1 |
| juniIpv6ProfileNdManagedConfig Enable/disable ND managed config for this IPv6 network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.10 |
| juniIpv6ProfileNdOtherConfig Enable/disable ND other config for this IPv6 network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.11 |
| juniIpv6ProfileNdSuppressRa Enable/disable ND suppress RA for this IPv6 network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.12 |
| juniIpv6ProfileNdRaInterval The configured interval between IPv6 RA transmissions on the interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.13 |
| juniIpv6ProfileNdRaLifeTime The configured RA lifetime for this IPv6 network interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.14 |
| juniIpv6ProfileNdReachableTime The configured RA reachable time for this IPv6 network interface. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.15 |
| juniIpv6ProfileNdPrefix The prefix associated with the this interface. | column | IPV6-TCIpv6AddressPrefix | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.16 |
| juniIpv6ProfileNdPrefixOnLinkFlag This object has the value 'true(1)', if this
prefix can be used for on-link determination
and the value 'false(2)' otherwise. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.18 |
| juniIpv6ProfileNdPrefixAutonomousFlag Autonomous address configuration flag. When
true(1), indicates that this prefix can be used
for autonomous address configuration (i.e. can
be used to form a local interface addres… | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.19 |
| juniIpv6ProfileSetMap A bitmap representing which objects in this entry have been explicitly
configured. See the definition of the JuniSetMap TEXTUAL-CONVENTION for
details of use.
The … | column | Juniper-TCJuniSetMap | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.2 |
| juniIpv6ProfileNdPrefixPreferredLifetime It is the length of time in seconds that this
prefix will remain preferred, i.e. time until
deprecation. A value of 4,294,967,295 represents
infinity.
The address … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.20 |
| juniIpv6ProfileNdPrefixValidLifetime It is the length of time in seconds that this
prefix will remain valid, i.e. time until
invalidation. A value of 4,294,967,295 represents
infinity.
The address gen… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.21 |
| juniIpv6ProfileRouterName The virtual router to which an IPv6 interface configured by this
profile will be assigned, if other mechanisms do not otherwise specify a
virtual router assignment. | column | Juniper-TCJuniName | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.3 |
| juniIpv6ProfileIpv6Addr An IPv6 address to be used by an IPv6 interface configured by this
profile. This object will have a value of 0::0 for an unnumbered
interface. | column | INET-ADDRESS-MIBInetAddressIPv6 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.4 |
| juniIpv6ProfileIpv6MaskLen An IPv6 address mask length to be used by an IPv6 interface configured
by this profile. This object will have a value of 0 for an unnumbered
interface. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.5 |
| juniIpv6ProfileMtu The configured MTU size for this IPv6 network interface. If set to
zero, the default MTU size, as determined by the underlying network
media, is used. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.6 |
| juniIpv6ProfileSrcAddrValidEnable Enable/disable whether source addresses in received IPv6 packets are
validated. Validation is performed by looking up the source IPv6
address in the routing database and determin… | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.7 |
| juniIpv6ProfileInheritNumString The text identifier of the numbered interface, associated with the
specified virtual router, whose IPv6 address is used as the source
address when transmitting IPv6 packets on unn… | column | OctetString | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.8 |
| juniIpv6ProfileNdEnabled Enable/disable ND for this IPv6 network interface. | column | Juniper-TCJuniEnable | .1.3.6.1.4.1.4874.2.2.68.1.1.1.1.9 |