juniBgpAddressFamilyUnconfiguredAttributes
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.19.1.15
Object
column
r/w
Bits
On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operational value).
1 = The attribute is unconfigured (i.e. the operational value is
inherited from the a higher level which could be the default
value).
Getting the attribute value itself always returns the operational value
of that attribute regardless of whether the attribute is configured or
unconfigured.
On write each bit indicates whether or not the corresponding attribute
should be set to the unconfigured state:
0 = No operation (i.e. do not change the state of the attribute).
1 = Set the attribute to the unconfigured state.
Setting an attribute to a value has the automatic side-effect of setting
the bit with the same name to zero.
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.19.1.15- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- juniBgpAddressFamilyEntry
- Table
- juniBgpAddressFamilyTable
- Siblings
- 26
Syntax
Bits
Values & Constraints
Enumerated Values
0 | juniBgpAddressFamilyDefaultOriginate |
1 | juniBgpAddressFamilyRouteFlapDampening |
2 | juniBgpAddressFamilyDampeningSuppressThreshold |
3 | juniBgpAddressFamilyDampeningReuseThreshold |
4 | juniBgpAddressFamilyDampeningMaxHoldDownTime |
5 | juniBgpAddressFamilyDampeningHalfLifeReachable |
6 | juniBgpAddressFamilyDampeningHalfLifeUnreachable |
7 | juniBgpAddressFamilyDampeningRouteMapName |
8 | juniBgpAddressFamilyExternalDistance |
9 | juniBgpAddressFamilyInternalDistance |
10 | juniBgpAddressFamilyLocalDistance |
11 | juniBgpAddressFamilyDefaultOriginateRouteMap |
12 | juniBgpAddressFamilyCheckVpnNextHops |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpAddressFamilyVrfName The name of the VPN Routing Forwarding (VRF) instance in which this
address-family is configured. The empty string indicates that this
address-family is not in a VRF. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.19.1.1 |
| juniBgpAddressFamilyDampeningHalfLifeUnreachable Figure of merit half life for unreachable routes, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.10 |
| juniBgpAddressFamilyDampeningRouteMapName The name of the route-map used to determine which routes are dampened
and which aren't and to set the dampening parameters for those routes
which are dampenend. A zero length rou… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.11 |
| juniBgpAddressFamilyResetConnectionType Writing a value to this object causes one individual address family
within the sessions to all peers in this VRF to be cleared; the value
determines what type of clear is executed… | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.19.1.12 |
| juniBgpAddressFamilyRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.19.1.13 |
| juniBgpAddressFamilyOperationalState The BGP address family operational state. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.19.1.14 |
| juniBgpAddressFamilyExternalDistance The administrative distance for external routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.16 |
| juniBgpAddressFamilyInternalDistance The administrative distance for internal routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.17 |
| juniBgpAddressFamilyLocalDistance The administrative distance for local routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.18 |
| juniBgpAddressFamilyDefaultOriginateRouteMap The route-map to apply to the default route which is advertised as a
result of setting juniBgpAddressFamilyDefaultOriginate to true. An
empty string means that no route-map is ap… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.19 |
| juniBgpAddressFamilyAfi The AFI of the address-family. | column | JuniBgpAfi | .1.3.6.1.4.1.4874.2.2.29.1.19.1.2 |
| juniBgpAddressFamilyIpIntfProfileNameForMplsHeads obsolete Obsolete the name of the IP interface profile used by BGP to create IP dynamic
interfaces on top of MPLS stacked tunnel heads. When support for BGP-created
IP dynamic interfaces … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.20 |
| juniBgpAddressFamilyIpIntfProfileNameForMplsTails obsolete Obsolete the name of the IP interface profile used by BGP to create IP dynamic
interfaces on top of MPLS stacked tunnel tails. When support for BGP-created
IP dynamic interfaces … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.21 |
| juniBgpAddressFamilyIpIntfServiceProfileNameForMplsHeads obsolete Obsolete the name of the IP interface service-profile used by BGP to create IP
dynamic interfaces on top of MPLS stacked tunnel heads. When support for BGP-created
dynamic interf… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.22 |
| juniBgpAddressFamilyIpIntfServiceProfileNameForMplsTails obsolete The name of the IP interface service-profile used by BGP to create IP
dynamic interfaces on top of MPLS stacked tunnel tails. When support for BGP-created
dynamic interfaces was … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.23 |
| juniBgpAddressFamilyCheckVpnNextHops If this object is set to true, the reachability of the next-hops of
routes in this address-family are checked. If this object is set to
false, the next-hops if routes in this add… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.24 |
| juniBgpAddressFamilyPathSelectionIsDeferred Is path selection for the address-family currently deferred? | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.25 |
| juniBgpAddressFamilyPreventBgpRoutesFromBeingPushedToLineCards Is BGP still in the process of placing fresh routes in the route
table after a restart? During this period the line cards are forced
to continue forwarding using the old stale rou… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.26 |
| juniBgpAddressFamilyTimeUntilPathSelectionDeferTimerExpires The number of seconds until the path selection defer timer expires
or zero if it is not running. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.27 |
| juniBgpAddressFamilySafi The SAFI of the address-family. | column | JuniBgpSafi | .1.3.6.1.4.1.4874.2.2.29.1.19.1.3 |
| juniBgpAddressFamilyDefaultOriginate Set this object to true(1) in order to advertise a default route, if
present. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.4 |
| juniBgpAddressFamilyRouteFlapDampening Set this object to true(1) in order to enable route flap dampening. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.5 |
| juniBgpAddressFamilyDampeningSuppressThreshold The dampening cutoff threshold (scaled). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.6 |
| juniBgpAddressFamilyDampeningReuseThreshold The dampening reuse threshold (scaled). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.7 |
| juniBgpAddressFamilyDampeningMaxHoldDownTime Maximum route holddown time, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.8 |
| juniBgpAddressFamilyDampeningHalfLifeReachable Figure of merit half life for reachable routes, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.9 |