juniBgpAddressFamilyPathSelectionIsDeferred
Juniper-BGP-MIB ·
.1.3.6.1.4.1.4874.2.2.29.1.19.1.25
Object
column
SNMPv2-TCTruthValue
Is path selection for the address-family currently deferred?
Context
- MIB
- Juniper-BGP-MIB
- OID
.1.3.6.1.4.1.4874.2.2.29.1.19.1.25- Type
- column
- Access
- readonly
- Status
- current
- Parent
- juniBgpAddressFamilyEntry
- Table
- juniBgpAddressFamilyTable
- Siblings
- 26
Values & Constraints
Type Values
1 | true |
2 | false |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| juniBgpAddressFamilyVrfName The name of the VPN Routing Forwarding (VRF) instance in which this
address-family is configured. The empty string indicates that this
address-family is not in a VRF. | column | Juniper-TCJuniVrfName | .1.3.6.1.4.1.4874.2.2.29.1.19.1.1 |
| juniBgpAddressFamilyDampeningHalfLifeUnreachable Figure of merit half life for unreachable routes, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.10 |
| juniBgpAddressFamilyDampeningRouteMapName The name of the route-map used to determine which routes are dampened
and which aren't and to set the dampening parameters for those routes
which are dampenend. A zero length rou… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.11 |
| juniBgpAddressFamilyResetConnectionType Writing a value to this object causes one individual address family
within the sessions to all peers in this VRF to be cleared; the value
determines what type of clear is executed… | column | JuniBgpResetConnectionType | .1.3.6.1.4.1.4874.2.2.29.1.19.1.12 |
| juniBgpAddressFamilyRowStatus Controls creation/deletion of entries in this table according to the
RowStatus textual convention, constrained to support the following
values only:
createAndGo
destroy | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.4874.2.2.29.1.19.1.13 |
| juniBgpAddressFamilyOperationalState The BGP address family operational state. | column | Enumeration | .1.3.6.1.4.1.4874.2.2.29.1.19.1.14 |
| juniBgpAddressFamilyUnconfiguredAttributes On get each bit indicates whether the corresponding attribute is
configured or unconfigured:
0 = The attribute is configured (i.e. the configured value is the
operationa… | column | Bits | .1.3.6.1.4.1.4874.2.2.29.1.19.1.15 |
| juniBgpAddressFamilyExternalDistance The administrative distance for external routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.16 |
| juniBgpAddressFamilyInternalDistance The administrative distance for internal routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.17 |
| juniBgpAddressFamilyLocalDistance The administrative distance for local routes. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.18 |
| juniBgpAddressFamilyDefaultOriginateRouteMap The route-map to apply to the default route which is advertised as a
result of setting juniBgpAddressFamilyDefaultOriginate to true. An
empty string means that no route-map is ap… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.19 |
| juniBgpAddressFamilyAfi The AFI of the address-family. | column | JuniBgpAfi | .1.3.6.1.4.1.4874.2.2.29.1.19.1.2 |
| juniBgpAddressFamilyIpIntfProfileNameForMplsHeads obsolete Obsolete the name of the IP interface profile used by BGP to create IP dynamic
interfaces on top of MPLS stacked tunnel heads. When support for BGP-created
IP dynamic interfaces … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.20 |
| juniBgpAddressFamilyIpIntfProfileNameForMplsTails obsolete Obsolete the name of the IP interface profile used by BGP to create IP dynamic
interfaces on top of MPLS stacked tunnel tails. When support for BGP-created
IP dynamic interfaces … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.21 |
| juniBgpAddressFamilyIpIntfServiceProfileNameForMplsHeads obsolete Obsolete the name of the IP interface service-profile used by BGP to create IP
dynamic interfaces on top of MPLS stacked tunnel heads. When support for BGP-created
dynamic interf… | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.22 |
| juniBgpAddressFamilyIpIntfServiceProfileNameForMplsTails obsolete The name of the IP interface service-profile used by BGP to create IP
dynamic interfaces on top of MPLS stacked tunnel tails. When support for BGP-created
dynamic interfaces was … | column | OctetString | .1.3.6.1.4.1.4874.2.2.29.1.19.1.23 |
| juniBgpAddressFamilyCheckVpnNextHops If this object is set to true, the reachability of the next-hops of
routes in this address-family are checked. If this object is set to
false, the next-hops if routes in this add… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.24 |
| juniBgpAddressFamilyPreventBgpRoutesFromBeingPushedToLineCards Is BGP still in the process of placing fresh routes in the route
table after a restart? During this period the line cards are forced
to continue forwarding using the old stale rou… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.26 |
| juniBgpAddressFamilyTimeUntilPathSelectionDeferTimerExpires The number of seconds until the path selection defer timer expires
or zero if it is not running. | column | Integer32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.27 |
| juniBgpAddressFamilySafi The SAFI of the address-family. | column | JuniBgpSafi | .1.3.6.1.4.1.4874.2.2.29.1.19.1.3 |
| juniBgpAddressFamilyDefaultOriginate Set this object to true(1) in order to advertise a default route, if
present. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.4 |
| juniBgpAddressFamilyRouteFlapDampening Set this object to true(1) in order to enable route flap dampening. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.4874.2.2.29.1.19.1.5 |
| juniBgpAddressFamilyDampeningSuppressThreshold The dampening cutoff threshold (scaled). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.6 |
| juniBgpAddressFamilyDampeningReuseThreshold The dampening reuse threshold (scaled). | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.7 |
| juniBgpAddressFamilyDampeningMaxHoldDownTime Maximum route holddown time, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.8 |
| juniBgpAddressFamilyDampeningHalfLifeReachable Figure of merit half life for reachable routes, in seconds. | column | seconds SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.4874.2.2.29.1.19.1.9 |