jnxWxCommonEventIpsecSecurityAssociationExpired
JUNIPER-WX-COMMON-MIB ·
.1.3.6.1.4.1.8239.2.1.3.2.0.16
Object
notification
An IPSec security association has been deleted from the security association database.
Context
- MIB
- JUNIPER-WX-COMMON-MIB
- OID
.1.3.6.1.4.1.8239.2.1.3.2.0.16- Type
- notification
- Status
- current
- Parent
- jnxWxCommonEventEventsV2
- Siblings
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxWxCommonEventInFailSafeMode This trap is sent when the device boots up in fail-safe mode.
This can happen for one of the following reasons:
o Fail-safe reboot was explicitly initiated by the user.
o The devi… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.1 |
| jnxWxCommonEventFanSpeedVariation The speed of a cooling fan inside the device is either
too low or too high. The 'jnxWxCommonEventDescr' object
has the name of the fan that has the problem.
This trap i… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.10 |
| jnxWxCommonEventFanOk A cooling fan inside the device that had previously
failed or whose speed variation was high is now
working properly. The 'jnxWxCommonEventDescr' object
has the name of the fan th… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.11 |
| jnxWxCommonEventInterfaceSpeedMismatch A mismatch is detected between the local and remote
interface settings. This can happen due to a mismatch
in the local and remote interface speed or mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.12 |
| jnxWxCommonEventInterfaceSpeedOk A mismatch previously detected between the local and remote
interface settings is now resolved. The local and remote interface
speed and mode are matched. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.13 |
| jnxWxCommonEventInterfaceDuplexMismatch A possible mismatch was detected between the duplex setting
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remo… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.14 |
| jnxWxCommonEventIpsecSecurityAssociationAdded An IPSec security association has been negotiated and added
to security association database. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.15 |
| jnxWxCommonEventIpsecSecurityAssociationDeleted An IPSec security association has been deleted from the
security association database. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.17 |
| jnxWxCommonEventPowerSupplyFailure One or more sources of power to the system has failed.
A redundant power-supply has presumably taken over.
NOTE: This trap is for future use.
WX devices currently… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.2 |
| jnxWxCommonEventPowerSupplyOk One or more previously failed sources of power is now
working normally. The transition to normal condition happened
without the system having to be restarted.
NOTE: Thi… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.3 |
| jnxWxCommonEventLicenseExpired The license for the system expired.
As a result, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.4 |
| jnxWxCommonEventThruputLimitExceeded The throughput of traffic through the device
has exceeded the limit for which it has
been licensed. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.5 |
| jnxWxCommonEventLicenseWillExpire The license for the system is about to
expire shortly. When it eventually does
expire, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.6 |
| jnxWxCommonEventLoginFailure A user's login attempt via the console/ssh/web server
failed due to incorrect username or password. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.7 |
| jnxWxCommonEventFaultTolerantPassThrough An anomalous health condition was detected.
It would have subsequently triggered hardware
pass through mode followed by a reboot. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.8 |
| jnxWxCommonEventFanFailure A cooling fan inside the device has failed.
The 'jnxWxCommonEventDescr' object has the name of
the fan that failed.
This trap is currently unused | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxWxCommonEventDescr String that provides a textual description of the event. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8239.2.1.3.1.1 |