jnxWxCommonEventInterfaceDuplexMismatch
JUNIPER-WX-COMMON-MIB ·
.1.3.6.1.4.1.8239.2.1.3.2.0.14
Object
notification
A possible mismatch was detected between the duplex setting
of either the local or remote interface and that of the
device attached to that interface. The interface (local
or remote) is identified by the 'jnxWxCommonEventDescr' object.
Note that this notification is quite different from
jnxWxCommonEventInterfaceSpeedMismatch, which compares the
local and remote interfaces on the same WX device.
Context
- MIB
- JUNIPER-WX-COMMON-MIB
- OID
.1.3.6.1.4.1.8239.2.1.3.2.0.14- Type
- notification
- Status
- current
- Parent
- jnxWxCommonEventEventsV2
- Siblings
- 16
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxWxCommonEventInFailSafeMode This trap is sent when the device boots up in fail-safe mode.
This can happen for one of the following reasons:
o Fail-safe reboot was explicitly initiated by the user.
o The devi… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.1 |
| jnxWxCommonEventFanSpeedVariation The speed of a cooling fan inside the device is either
too low or too high. The 'jnxWxCommonEventDescr' object
has the name of the fan that has the problem.
This trap i… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.10 |
| jnxWxCommonEventFanOk A cooling fan inside the device that had previously
failed or whose speed variation was high is now
working properly. The 'jnxWxCommonEventDescr' object
has the name of the fan th… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.11 |
| jnxWxCommonEventInterfaceSpeedMismatch A mismatch is detected between the local and remote
interface settings. This can happen due to a mismatch
in the local and remote interface speed or mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.12 |
| jnxWxCommonEventInterfaceSpeedOk A mismatch previously detected between the local and remote
interface settings is now resolved. The local and remote interface
speed and mode are matched. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.13 |
| jnxWxCommonEventIpsecSecurityAssociationAdded An IPSec security association has been negotiated and added
to security association database. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.15 |
| jnxWxCommonEventIpsecSecurityAssociationExpired An IPSec security association has been deleted from the
security association database. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.16 |
| jnxWxCommonEventIpsecSecurityAssociationDeleted An IPSec security association has been deleted from the
security association database. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.17 |
| jnxWxCommonEventPowerSupplyFailure One or more sources of power to the system has failed.
A redundant power-supply has presumably taken over.
NOTE: This trap is for future use.
WX devices currently… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.2 |
| jnxWxCommonEventPowerSupplyOk One or more previously failed sources of power is now
working normally. The transition to normal condition happened
without the system having to be restarted.
NOTE: Thi… | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.3 |
| jnxWxCommonEventLicenseExpired The license for the system expired.
As a result, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.4 |
| jnxWxCommonEventThruputLimitExceeded The throughput of traffic through the device
has exceeded the limit for which it has
been licensed. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.5 |
| jnxWxCommonEventLicenseWillExpire The license for the system is about to
expire shortly. When it eventually does
expire, the system will switch over to
and stay in pass-through mode. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.6 |
| jnxWxCommonEventLoginFailure A user's login attempt via the console/ssh/web server
failed due to incorrect username or password. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.7 |
| jnxWxCommonEventFaultTolerantPassThrough An anomalous health condition was detected.
It would have subsequently triggered hardware
pass through mode followed by a reboot. | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.8 |
| jnxWxCommonEventFanFailure A cooling fan inside the device has failed.
The 'jnxWxCommonEventDescr' object has the name of
the fan that failed.
This trap is currently unused | notification | - | .1.3.6.1.4.1.8239.2.1.3.2.0.9 |
Notification Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxWxCommonEventDescr String that provides a textual description of the event. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.8239.2.1.3.1.1 |