jnxPtpPassivePortMonitorDataValid

JUNIPER-TIMING-NOTFNS-MIB · .1.3.6.1.4.1.2636.3.75.1.6.3.1.3
MIB view Table view

Object

column Enumeration 
This describes the validity of the data. If port state is passive and, passive
port monitoring feature is enabled, then there is a valid measurement data
available set to (0). If port state is other than passive, then not-applicable
will be set to (1); and if port state is passive and servo state is other than
phase-aligned, this will be set to (2) inactive.

Context

MIB
JUNIPER-TIMING-NOTFNS-MIB
OID
.1.3.6.1.4.1.2636.3.75.1.6.3.1.3
Type
column
Access
readonly
Status
current
Parent
jnxPtpPassivePortMonitorEntry
Table
jnxPtpPassivePortMonitorTable
Siblings
18

Syntax

Enumeration

Values & Constraints

Enumerated Values
0valid
1inactive
2not-applicable

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
jnxPtpPassivePortMonitorIntfName
The interface name for PTP passive port data displayed for the stream.
columnOctetString.1.3.6.1.4.1.2636.3.75.1.6.3.1.1
jnxPtpPassivePortMonitorMinMasterSlaveDelay
Minimum Master to Slave Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.10
jnxPtpPassivePortMonitorMaxMasterSlaveDelay
Maximum Master to Slave Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.11
jnxPtpPassivePortMonitorAverageSlaveMasterDelay
Average Slave to Master Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.12
jnxPtpPassivePortMonitorMinSlaveMasterDelay
Minimum Slave to Master Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.13
jnxPtpPassivePortMonitorMaxSlaveMasterDelay
Maximum Slave to Master Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.14
jnxPtpPassivePortMonitorAveragePathDelay
Average Mean Path Delay of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.15
jnxPtpPassivePortMonitorMaxPhaseOffsetThreshold
The configured Phase Offset threshold acceptable between the passive port and slave port.
columnSNMPv2-SMIUnsigned32.1.3.6.1.4.1.2636.3.75.1.6.3.1.16
jnxPtpPassivePortMonitorPhaseOffsetThresholdExceeded
Reflects the status as whether the passive port exceeded the configured Max offset threshold or not.
columnEnumeration.1.3.6.1.4.1.2636.3.75.1.6.3.1.17
jnxPtpPassivePortMonitorPortConfig
Represents the current state of the configured passive port.
columnEnumeration.1.3.6.1.4.1.2636.3.75.1.6.3.1.18
jnxPtpPassivePortMonitorPortState
Represents the current state of the port.
columnEnumeration.1.3.6.1.4.1.2636.3.75.1.6.3.1.19
jnxPtpPassivePortMonitorSourcePortIdentity
Identity of the source port to which PTP passive port data is associated.
columnOctetString.1.3.6.1.4.1.2636.3.75.1.6.3.1.2
jnxPtpPassivePortMonitorStartTimestamp
Start Timestamp of PTP passive port monitor performance data.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.75.1.6.3.1.4
jnxPtpPassivePortMonitorEndTimestamp
End Timestamp of PTP passive port monitor performance data.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.2636.3.75.1.6.3.1.5
jnxPtpPassivePortMonitorAveragePhaseOffsetFromMaster
Average Phase Offset value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.6
jnxPtpPassivePortMonitorMinPhaseOffsetFromMaster
Minimum Phase Offset value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.7
jnxPtpPassivePortMonitorMaxPhaseOffsetFromMaster
Maximum Phase Offset value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.8
jnxPtpPassivePortMonitorAverageMasterSlaveDelay
Average Master to Slave Delay value of the passive port from Master.
columnJUNIPER-SMIInteger64.1.3.6.1.4.1.2636.3.75.1.6.3.1.9