jnxSoamLmCfgPriority
JUNIPER-SOAM-PM-MIB ·
.1.3.6.1.4.1.2636.3.78.1.2.1.1.7
Object
column
IEEE8021-TC-MIBIEEE8021PriorityValue
This object specifies the Loss Measurement OAM message priority
as well as the priority of the service/OAM traffic to be monitored.
Only frames of the same Class of Service are counted.
The default value is to be the value which yields the lowest frame
loss.
This object is not applicable if jnxSoamLmCfgType is set to lmCcm.
This object can only be written at row creation time and cannot be
modified once it has been created.
Context
- MIB
- JUNIPER-SOAM-PM-MIB
- OID
.1.3.6.1.4.1.2636.3.78.1.2.1.1.7- Type
- column
- Access
- readonly
- Status
- current
- Parent
- jnxSoamLmCfgEntry
- Table
- jnxSoamLmCfgTable
- Siblings
- 33
Syntax
IEEE8021-TC-MIBIEEE8021PriorityValue
- Source
- IEEE8021-TC-MIBIEEE8021PriorityValue
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..7
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxSoamLmCfgIndex An index to the Loss Measurement Configuration table which indicates
the specific measurement session for the MEP.
jnxSoamPmMepOperNextIndex needs to be inspected t… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.1 |
| jnxSoamLmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size
of the LM frame is determined by the jnxSoamLmFrameSize object.
A value of 'true' indicates that … | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.2.1.1.10 |
| jnxSoamLmCfgTestTlvPattern This object specifies the type of test pattern to be
sent in the LM frame Test TLV when the size of LM PDU is
determined by the jnxSoamLmFrameSize object and
jnxSoamLmTestTlvInclu… | column | JnxSoamTcTestPatternType | .1.3.6.1.4.1.2636.3.78.1.2.1.1.11 |
| jnxSoamLmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals
to store in the history statistic table (jnxSoamLmHistoryStatsTable)
At least 32 completed Measu… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.12 |
| jnxSoamLmCfgDestMepId The Maintenance Association End Point Identifier of
another MEP in the same Maintenance Association to which
the SOAM LM frame is to be sent.
This address will be u… | column | IEEE8021-CFM-MIBDot1agCfmMepIdOrZero | .1.3.6.1.4.1.2636.3.78.1.2.1.1.13 |
| jnxSoamLmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for
SOAM LM frame transmission.
A value of 'false' indicates that the MAC address of the
target MEP… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.2.1.1.14 |
| jnxSoamLmCfgStartTimeType This object specifies the type of start time of the SOAM LM
session. The start time can be disabled (none), immediate, relative,
or fixed.
The value of 'none' is il… | column | JnxSoamTcOperationTimeType | .1.3.6.1.4.1.2636.3.78.1.2.1.1.15 |
| jnxSoamLmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the
SOAM Loss Measurement session. This object is used only used if
jnxSoamLmStartTimeType is 'fixed' and is ignored otherwise.… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.78.1.2.1.1.16 |
| jnxSoamLmCfgRelativeStartTime This object specifies the relative start time, from the
current system time, for the SOAM LM session. This
object is used only if jnxSoamLmStartTimeType is 'relative' and is
ignor… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2636.3.78.1.2.1.1.17 |
| jnxSoamLmCfgRepetitionTime This object specifies a configurable repetition time between
Measurement Intervals in a Loss Measurement session, in seconds.
If the value is 0 (none), there is no … | column | seconds Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.18 |
| jnxSoamLmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for
the Loss Measurement session are aligned with a zero offset to
real time.
The value 'true' indicates tha… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.2.1.1.19 |
| jnxSoamLmCfgType This object specifies what type of Loss Measurement
will be performed.
lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked
lmSlm(2) SLM SOAM PDU gene… | column | Enumeration | .1.3.6.1.4.1.2636.3.78.1.2.1.1.2 |
| jnxSoamLmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value
if jnxSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition
time is a factor of 60 minutes. If not… | column | minutes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.20 |
| jnxSoamLmCfgSessionType This object indicates whether the current session is defined to
be 'Proactive' or 'On-Demand'. A value of 'proactive'
indicates the current session is 'Proactive'. A value of 'onD… | column | OctetString | .1.3.6.1.4.1.2636.3.78.1.2.1.1.21 |
| jnxSoamLmCfgSessionStatus This object indicates the current status of the LM session. A value
of 'active' indicates the current LM session is active, i.e. the current
time lies between the start time and t… | column | OctetString | .1.3.6.1.4.1.2636.3.78.1.2.1.1.22 |
| jnxSoamLmCfgHistoryClear This object when written clears the Loss Measurement history
Table (jnxSoamLmHistoryStatsTable) - all rows are deleted.
When read the value always returns 'false'.
… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.2.1.1.23 |
| jnxSoamLmCfgRowStatus The status of the row.
The writable columns in a row cannot be changed if the row
is active, except for jnxSoamLmCfgHistoryClear and jnxSoamLmCfgEnabled
objects. Al… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.78.1.2.1.1.24 |
| jnxSoamLmCfgMeasurementInterval This object specifies the Measurement Interval for FLR statistics,
in minutes. A Measurement Interval of 15 minutes needs to be supported,
other intervals may be supported.
… | column | minutes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.25 |
| jnxSoamLmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted.
If jnxSoamLmCfgType is 'lmCcm', the destination MAC address is always a
multicast address indicating … | column | SNMPv2-TCMacAddress | .1.3.6.1.4.1.2636.3.78.1.2.1.1.26 |
| jnxSoamLmCfgStopTimeType This object specifies the type of stop time to terminate the
SOAM LM session. The stop time can be forever (none), relative, or
fixed.
The value of 'none' indicates… | column | JnxSoamTcOperationTimeType | .1.3.6.1.4.1.2636.3.78.1.2.1.1.27 |
| jnxSoamLmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the
SOAM Loss Measurement session. This object is used only used
if jnxSoamLmStopTimeType is 'fixed' and is ignored otherwise.
… | column | SNMPv2-TCDateAndTime | .1.3.6.1.4.1.2636.3.78.1.2.1.1.28 |
| jnxSoamLmCfgRelativeStopTime This object specifies the relative stop time, from the
session start time, to stop the SOAM LM session. This
object is used only if jnxSoamLmStopTimeType is 'relative' and is
igno… | column | SNMPv2-TCTimeInterval | .1.3.6.1.4.1.2636.3.78.1.2.1.1.29 |
| jnxSoamLmCfgVersion This object indicates the version of the PDUs used to perform
Loss Measurement.
The value is placed in the Version field of the PDU and indicates
that the PDU forma… | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.3 |
| jnxSoamLmCfgAvailabilityMeasurementInterval This object specifies the availability Measurement Interval in
minutes.
A Measurement Interval of 15 minutes is to be supported, other intervals
can be supported.
This object can … | column | minutes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.30 |
| jnxSoamLmCfgAvailabilityNumConsecutiveMeasPdus This object specifies a configurable number of consecutive
loss measurement PDUs to be used in evaluating the
availability/unavailability status of each availability
indicator per… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.31 |
| jnxSoamLmCfgAvailabilityFlrThreshold This object specifies a configurable availability threshold to be
used in evaluating the availability/unavailability status of an
availability indicator per MEF 10.2.1. The availa… | column | milli-percent Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.32 |
| jnxSoamLmCfgAvailabilityNumConsecutiveIntervals This object specifies a configurable number of consecutive
availability indicators to be used to determine a change in the
availability status as indicated by MEF 10.2.1. This par… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.33 |
| jnxSoamLmCfgAvailabilityNumConsecutiveHighFlr This object specifies a configurable number of consecutive
availability indicators to be used for assessing CHLI. This
parameter is equivalent to the Resilency parameter of 'p' as… | column | Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.34 |
| jnxSoamLmCfgEnabled This object specifies whether the Loss Measurement session
is enabled.
The value 'true' indicates the Loss Measurement session is enabled and
SOAM PDUs are sent and… | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.78.1.2.1.1.4 |
| jnxSoamLmCfgMeasurementEnable A vector of bits that indicates the type of SOAM LM counters found
in the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable,
jnxSoamLmHistoryStatsTable that are enabled.
th… | column | Bits | .1.3.6.1.4.1.2636.3.78.1.2.1.1.5 |
| jnxSoamLmCfgMessagePeriod This object specifies the interval between Loss Measurement
OAM message transmission. For Loss Measurement monitoring
applications the default value is 1 sec.
This … | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.6 |
| jnxSoamLmCfgFrameSize This object specifies the Loss Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
The range of frame sizes from 64 through 2000 o… | column | bytes Unsigned32 | .1.3.6.1.4.1.2636.3.78.1.2.1.1.8 |
| jnxSoamLmCfgDataPattern This object specifies the LM data pattern included in a Data TLV
when the size of the LM frame is determined by the
jnxSoamLmFrameSize object and jnxoamLmTestTlvIncluded is 'false… | column | JnxSoamTcDataPatternType | .1.3.6.1.4.1.2636.3.78.1.2.1.1.9 |