jnxSoamLmCfgFrameSize

JUNIPER-SOAM-PM-MIB · .1.3.6.1.4.1.2636.3.78.1.2.1.1.8

Object

column bytes Unsigned32

This object specifies the Loss Measurement frame size between
64 bytes and the maximum transmission unit of the EVC.
              
The range of frame sizes from 64 through 2000 octets need to be
supported, and the range of frame sizes from 2001 through 9600 octets
is suggested be supported.
              
The adjustment to the frame size of the standard frame size is
accomplished by the addition of a Data or Test TLV. A Data or Test TLV
is only added to the frame if the frame size is greater than 64 bytes.
              
This object is only valid for the entity transmitting the Loss
Measurement frames, type 'lmSlm', and is ignored by the
entity receiving frames. It is not applicable for the 'lmCcm' or
'lmLmm' types.
              
This object can only be written at row creation time and cannot be
modified once it has been created.

Context

MIB: JUNIPER-SOAM-PM-MIB
OID: .1.3.6.1.4.1.2636.3.78.1.2.1.1.8
Type: column
Access: readonly
Status: current
Units: bytes
Parent: jnxSoamLmCfgEntry
Table: jnxSoamLmCfgTable
Siblings: 33

Syntax

bytes Unsigned32

Values & Constraints

Object Constraints

range: 64-9600

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxSoamLmCfgIndex An index to the Loss Measurement Configuration table which indicates the specific measurement session for the MEP. jnxSoamPmMepOperNextIndex needs to be inspected t…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.1`
jnxSoamLmCfgTestTlvIncluded Indicates whether a Test TLV or Data TLV is included when the size of the LM frame is determined by the jnxSoamLmFrameSize object. A value of 'true' indicates that …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.10`
jnxSoamLmCfgTestTlvPattern This object specifies the type of test pattern to be sent in the LM frame Test TLV when the size of LM PDU is determined by the jnxSoamLmFrameSize object and jnxSoamLmTestTlvInclu…	column	JnxSoamTcTestPatternType	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.11`
jnxSoamLmCfgNumIntervalsStored This object specifies the number of completed Measurement Intervals to store in the history statistic table (jnxSoamLmHistoryStatsTable) At least 32 completed Measu…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.12`
jnxSoamLmCfgDestMepId The Maintenance Association End Point Identifier of another MEP in the same Maintenance Association to which the SOAM LM frame is to be sent. This address will be u…	column	IEEE8021-CFM-MIBDot1agCfmMepIdOrZero	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.13`
jnxSoamLmCfgDestIsMepId A value of 'true' indicates that MEPID of the target MEP is used for SOAM LM frame transmission. A value of 'false' indicates that the MAC address of the target MEP…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.14`
jnxSoamLmCfgStartTimeType This object specifies the type of start time of the SOAM LM session. The start time can be disabled (none), immediate, relative, or fixed. The value of 'none' is il…	column	JnxSoamTcOperationTimeType	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.15`
jnxSoamLmCfgFixedStartDateAndTime This object specifies the fixed start date/time for the SOAM Loss Measurement session. This object is used only used if jnxSoamLmStartTimeType is 'fixed' and is ignored otherwise.…	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.16`
jnxSoamLmCfgRelativeStartTime This object specifies the relative start time, from the current system time, for the SOAM LM session. This object is used only if jnxSoamLmStartTimeType is 'relative' and is ignor…	column	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.17`
jnxSoamLmCfgRepetitionTime This object specifies a configurable repetition time between Measurement Intervals in a Loss Measurement session, in seconds. If the value is 0 (none), there is no …	column	seconds Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.18`
jnxSoamLmCfgAlignMeasurementIntervals This object specifies whether the Measurement Intervals for the Loss Measurement session are aligned with a zero offset to real time. The value 'true' indicates tha…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.19`
jnxSoamLmCfgType This object specifies what type of Loss Measurement will be performed. lmLmm(1) LMM SOAM PDU generated and received LMR responses tracked lmSlm(2) SLM SOAM PDU gene…	column	Enumeration	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.2`
jnxSoamLmCfgAlignMeasurementOffset This object specifies the offset in minutes from the time of day value if jnxSoamLmCfgAlignMeasurementIntervals is 'true' and the repetition time is a factor of 60 minutes. If not…	column	minutes Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.20`
jnxSoamLmCfgSessionType This object indicates whether the current session is defined to be 'Proactive' or 'On-Demand'. A value of 'proactive' indicates the current session is 'Proactive'. A value of 'onD…	column	OctetString	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.21`
jnxSoamLmCfgSessionStatus This object indicates the current status of the LM session. A value of 'active' indicates the current LM session is active, i.e. the current time lies between the start time and t…	column	OctetString	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.22`
jnxSoamLmCfgHistoryClear This object when written clears the Loss Measurement history Table (jnxSoamLmHistoryStatsTable) - all rows are deleted. When read the value always returns 'false'. …	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.23`
jnxSoamLmCfgRowStatus The status of the row. The writable columns in a row cannot be changed if the row is active, except for jnxSoamLmCfgHistoryClear and jnxSoamLmCfgEnabled objects. Al…	column	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.24`
jnxSoamLmCfgMeasurementInterval This object specifies the Measurement Interval for FLR statistics, in minutes. A Measurement Interval of 15 minutes needs to be supported, other intervals may be supported. …	column	minutes Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.25`
jnxSoamLmCfgDestMacAddress The Target or Destination MAC Address Field to be transmitted. If jnxSoamLmCfgType is 'lmCcm', the destination MAC address is always a multicast address indicating …	column	SNMPv2-TCMacAddress	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.26`
jnxSoamLmCfgStopTimeType This object specifies the type of stop time to terminate the SOAM LM session. The stop time can be forever (none), relative, or fixed. The value of 'none' indicates…	column	JnxSoamTcOperationTimeType	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.27`
jnxSoamLmCfgFixedStopDateAndTime This object specifies the fixed stop date/time for the SOAM Loss Measurement session. This object is used only used if jnxSoamLmStopTimeType is 'fixed' and is ignored otherwise. …	column	SNMPv2-TCDateAndTime	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.28`
jnxSoamLmCfgRelativeStopTime This object specifies the relative stop time, from the session start time, to stop the SOAM LM session. This object is used only if jnxSoamLmStopTimeType is 'relative' and is igno…	column	SNMPv2-TCTimeInterval	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.29`
jnxSoamLmCfgVersion This object indicates the version of the PDUs used to perform Loss Measurement. The value is placed in the Version field of the PDU and indicates that the PDU forma…	column	SNMPv2-SMIUnsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.3`
jnxSoamLmCfgAvailabilityMeasurementInterval This object specifies the availability Measurement Interval in minutes. A Measurement Interval of 15 minutes is to be supported, other intervals can be supported. This object can …	column	minutes Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.30`
jnxSoamLmCfgAvailabilityNumConsecutiveMeasPdus This object specifies a configurable number of consecutive loss measurement PDUs to be used in evaluating the availability/unavailability status of each availability indicator per…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.31`
jnxSoamLmCfgAvailabilityFlrThreshold This object specifies a configurable availability threshold to be used in evaluating the availability/unavailability status of an availability indicator per MEF 10.2.1. The availa…	column	milli-percent Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.32`
jnxSoamLmCfgAvailabilityNumConsecutiveIntervals This object specifies a configurable number of consecutive availability indicators to be used to determine a change in the availability status as indicated by MEF 10.2.1. This par…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.33`
jnxSoamLmCfgAvailabilityNumConsecutiveHighFlr This object specifies a configurable number of consecutive availability indicators to be used for assessing CHLI. This parameter is equivalent to the Resilency parameter of 'p' as…	column	Unsigned32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.34`
jnxSoamLmCfgEnabled This object specifies whether the Loss Measurement session is enabled. The value 'true' indicates the Loss Measurement session is enabled and SOAM PDUs are sent and…	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.4`
jnxSoamLmCfgMeasurementEnable A vector of bits that indicates the type of SOAM LM counters found in the jnxSoamLmMeasuredStatsTable, jnxSoamLmCurrentStatsTable, jnxSoamLmHistoryStatsTable that are enabled. th…	column	Bits	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.5`
jnxSoamLmCfgMessagePeriod This object specifies the interval between Loss Measurement OAM message transmission. For Loss Measurement monitoring applications the default value is 1 sec. This …	column	ms SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.6`
jnxSoamLmCfgPriority This object specifies the Loss Measurement OAM message priority as well as the priority of the service/OAM traffic to be monitored. Only frames of the same Class of Service are co…	column	IEEE8021-TC-MIBIEEE8021PriorityValue	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.7`
jnxSoamLmCfgDataPattern This object specifies the LM data pattern included in a Data TLV when the size of the LM frame is determined by the jnxSoamLmFrameSize object and jnxoamLmTestTlvIncluded is 'false…	column	JnxSoamTcDataPatternType	`.1.3.6.1.4.1.2636.3.78.1.2.1.1.9`