jnxOpticsOTIfPreFecBERThresholdTime

JUNIPER-IFOPTICS-MIB · .1.3.6.1.4.1.2636.3.71.1.1.8.1.14

MIB view Table view

Object

column r/w ms SNMPv2-SMIInteger32

Specify the interval for which the BER must stay above
the signal degradation threshold or below the clear threshold
for the alarm to be raised or cleared respectively.

Context

MIB: JUNIPER-IFOPTICS-MIB
OID: .1.3.6.1.4.1.2636.3.71.1.1.8.1.14
Type: column
Access: readwrite
Status: current
Units: ms
Parent: jnxOpticsOTIfConfigEntry
Table: jnxOpticsOTIfConfigTable
Siblings: 15

Syntax

ms SNMPv2-SMIInteger32

Source: SNMPv2-SMIInteger32
Base type: Integer32

Values & Constraints

Type Constraints

range: -2147483648..2147483647

Related Objects

Sibling Objects

Object	Type	Syntax	OID
jnxOpticsOTIfConfigContainerIndex The associated jnxContentsContainerIndex - eg shelf..	column	Integer32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.1`
jnxOpticsOTIfOperState The operational state of this interface	column	JnxOpticsOTIfOperStates	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.10`
jnxOpticsOTIfHighPolarization Enable/disable high-polarization mode.	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.11`
jnxOpticsOTIfPreFecBERThresholdMantissa This will set the BER threshold(mantissa), which when crossed will trigger Signal Degrade.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.12`
jnxOpticsOTIfPreFecBERThresholdExponent This will set the BER threshold(exponent), which when crossed will trigger Signal Degrade.	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.13`
jnxOpticsOTIfPreFecBERThresholdClearMantissa This will set the BER threshold(mantissa) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.15`
jnxOpticsOTIfPreFecBERThresholdClearExponent This will set the BER threshold(exponent) for clear signal degrade condition, which signal degrade condition will be cleared when Pre-Fec error count is below the clear threshold …	column	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.16`
jnxOpticsOTIfConfigL1Index The level one index associated with this subject ... eg fpc slot.	column	Integer32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.2`
jnxOpticsOTIfConfigL2Index The level two index associated with this subject .. eg pic slot.	column	Integer32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.3`
jnxOpticsOTIfConfigL3Index The level three index associated with this subject.. eg port.	column	Integer32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.4`
jnxOpticsOTIfLaserEnable 0 - laser off 1 - laser on	column	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.5`
jnxOpticsOTIfFecMode This parameter indicates what FEC type in the OTU frame	column	JnxOpticsOTIfFecType	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.6`
jnxOpticsOTIfEncodingOption Encoding option selected	column	JnxOpticsOTIfEncodingOptions	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.7`
jnxOpticsOTIfModulation Modulation formats supported on the platform Unknown - (0), 16QAM - (1), 8QAM - (2), QPSK - (3)	column	Integer32	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.8`
jnxOpticsOTIfAdminState The Admin state of this interface	column	JnxOpticsOTIfAdminStates	`.1.3.6.1.4.1.2636.3.71.1.1.8.1.9`