jnxOpticsOTIfAdminState
JUNIPER-IFOPTICS-MIB ·
.1.3.6.1.4.1.2636.3.71.1.1.8.1.9
Object
column
r/w
JnxOpticsOTIfAdminStates
The Admin state of this interface
Context
- MIB
- JUNIPER-IFOPTICS-MIB
- OID
.1.3.6.1.4.1.2636.3.71.1.1.8.1.9- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- jnxOpticsOTIfConfigEntry
- Table
- jnxOpticsOTIfConfigTable
- Siblings
- 15
Syntax
JnxOpticsOTIfAdminStates
- Source
- JnxOpticsOTIfAdminStates
- Base type
Enumeration
Values & Constraints
Type Values
1 | jnxAdminStateInService |
2 | jnxAdminStateInServiceMA |
3 | jnxAdminStateOutofService |
4 | jnxAdminStateOutofServiceMA |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxOpticsOTIfConfigContainerIndex The associated jnxContentsContainerIndex - eg shelf.. | column | Integer32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.1 |
| jnxOpticsOTIfOperState The operational state of this interface | column | JnxOpticsOTIfOperStates | .1.3.6.1.4.1.2636.3.71.1.1.8.1.10 |
| jnxOpticsOTIfHighPolarization Enable/disable high-polarization mode. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.71.1.1.8.1.11 |
| jnxOpticsOTIfPreFecBERThresholdMantissa This will set the BER threshold(mantissa), which when
crossed will trigger Signal Degrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.12 |
| jnxOpticsOTIfPreFecBERThresholdExponent This will set the BER threshold(exponent), which when
crossed will trigger Signal Degrade. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.13 |
| jnxOpticsOTIfPreFecBERThresholdTime Specify the interval for which the BER must stay above
the signal degradation threshold or below the clear threshold
for the alarm to be raised or cleared respectively. | column | ms SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.14 |
| jnxOpticsOTIfPreFecBERThresholdClearMantissa This will set the BER threshold(mantissa) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear
threshold … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.15 |
| jnxOpticsOTIfPreFecBERThresholdClearExponent This will set the BER threshold(exponent) for clear signal
degrade condition, which signal degrade condition will be
cleared when Pre-Fec error count is below the clear threshold
… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.16 |
| jnxOpticsOTIfConfigL1Index The level one index associated with this subject ... eg fpc
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.2 |
| jnxOpticsOTIfConfigL2Index The level two index associated with this subject .. eg pic
slot. | column | Integer32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.3 |
| jnxOpticsOTIfConfigL3Index The level three index associated with this subject.. eg port. | column | Integer32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.4 |
| jnxOpticsOTIfLaserEnable 0 - laser off
1 - laser on | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.71.1.1.8.1.5 |
| jnxOpticsOTIfFecMode This parameter indicates what FEC type in the OTU frame | column | JnxOpticsOTIfFecType | .1.3.6.1.4.1.2636.3.71.1.1.8.1.6 |
| jnxOpticsOTIfEncodingOption Encoding option selected | column | JnxOpticsOTIfEncodingOptions | .1.3.6.1.4.1.2636.3.71.1.1.8.1.7 |
| jnxOpticsOTIfModulation Modulation formats supported on the platform
Unknown - (0),
16QAM - (1),
8QAM - (2),
QPSK - (3) | column | Integer32 | .1.3.6.1.4.1.2636.3.71.1.1.8.1.8 |