jnxoptIfODUkNimDEGM
JNX-OPT-IF-MIB ·
.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.8
Object
column
r/w
JnxoptIfDEGM
Indicates the threshold level for declaring a Degraded Signal defect (dDEG). A dDEG shall be declared if jnxoptIfODUkNimDEGM consecutive bad PM Seconds are detected.
Context
- MIB
- JNX-OPT-IF-MIB
- OID
.1.3.6.1.4.1.2636.3.73.1.1.8.4.1.8- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- jnxoptIfODUkNimConfigEntry
- Table
- jnxoptIfODUkNimConfigTable
- Siblings
- 9
Syntax
JnxoptIfDEGM
- Source
- JnxoptIfDEGM
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 2..10
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| jnxoptIfODUkNimDirectionality Specifies the monitor point for the ODUk Path non-intrusive
monitoring function. The value source(2) is not allowed
if the corresponding instance of jnxoptIfODUkDirectionality
… | column | JnxoptIfSinkOrSource | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.1 |
| jnxoptIfODUkNimRowStatus This columnar object is used for creating and deleting
a conceptual row of the jnxoptIfODUkNim config table.
It is used to model the activateNim and deactivateNim
operations of… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.10 |
| jnxoptIfODUkNimDAPIExpected The DAPI expected by the receiver.
This object has no effect if jnxoptIfODUkNimTIMDetMode has
the value off(1) or sapi(3). | column | JnxoptIfExDAPI | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.2 |
| jnxoptIfODUkNimSAPIExpected The SAPI expected by the receiver.
This object has no effect if jnxoptIfODUkNimTIMDetMode has
the value off(1) or dapi(2). | column | JnxoptIfExSAPI | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.3 |
| jnxoptIfODUkNimTraceIdentifierAccepted The actual trace identifier accepted. The value of
this object is unspecified if jnxoptIfODUkNimCurrentStatus
has any of the bit positions oci(0), lck(1), or ssf(5)
set or if j… | column | JnxoptIfAcTI | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.4 |
| jnxoptIfODUkNimTIMDetMode Indicates the mode of the Trace Identifier Mismatch (TIM)
Detection function. | column | JnxoptIfTIMDetMode | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.5 |
| jnxoptIfODUkNimTIMActEnabled Indicates whether the Trace Identifier Mismatch (TIM)
Consequent Action function is enabled. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.6 |
| jnxoptIfODUkNimDEGThr Indicates the threshold level for declaring a performance
monitoring (PM) Second to be bad. A PM Second is declared bad
if the percentage of detected errored blocks in that seco… | column | percentage JnxoptIfDEGThr | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.7 |
| jnxoptIfODUkNimCurrentStatus Indicates the defect condition of the entity, if
any. The value of this object is unspecified if
jnxoptIfODUkNimRowStatus has any value other than
active(1). | column | Bits | .1.3.6.1.4.1.2636.3.73.1.1.8.4.1.9 |