npCfgRootURL

JETDIRECT3-MIB · .1.3.6.1.4.1.11.2.4.3.5.14

MIB view Table view

Object

scalar obsolete r/w OctetString

The HTTP root(/) directory redirect location.

Context

MIB: JETDIRECT3-MIB
OID: .1.3.6.1.4.1.11.2.4.3.5.14
Type: scalar
Access: readwrite
Status: obsolete
Parent: npCfg
Siblings: 18

Syntax

OctetString

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects

Object	Type	Syntax	OID
npCfgSource This object indicates how the device obtained its IP configuration.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.4.3.5.1`
npCfgIdleTimeout The idle timeout is the length in seconds after which an idle connection is terminated. A value of zero disables the timeout. Valid time values range from 1 to 3600.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.10`
npCfgTcpMss Enumerate as follows: 0 = treat all hosts as local which means JetDirect sends a maximum of 1460 bytes of data in all outbound packets. 1 = treat hosts on different subnets bu…	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.11`
npCfgSubnetMask The subnet mask associated with the IP address of this card.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.12`
npCfgDefaultGateway This variable contains the IP address of the default router for this card.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.13`
npCfgGenURL obsolete The HTTP /redirect directory location.	scalar	OctetString	`.1.3.6.1.4.1.11.2.4.3.5.15`
npCfgDomainName obsolete The JetDirect domain name as configured by Web JetAdmin.	scalar	OctetString	`.1.3.6.1.4.1.11.2.4.3.5.16`
npCfgSlpTtl The TTL value is used in the IP header of SLP multicast pkts sent by JetDirect.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.17`
npCfgIPP The value can be 0, meaning IPP has been disabled, or 1, meaning IPP has been enabled.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.18`
npCfgMailServerUrl The mail server to which messages originating from the JetDirect should be sent. The value is a URL in the form: protocol://address:port The protocol and …	scalar	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.11.2.4.3.5.19`
npCfgYiaddr The IP address assigned to the card from the BOOTP reply yiaddr field.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.2`
npCfgSiaddr The IP address of the TFTP server from the BOOTP reply siaddr field.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.3`
npCfgGiaddr The IP address of the TFTP gateway from the BOOTP reply giaddr field.	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.4`
npCfgLogServer The IP address of the Syslog Server. If set via BOOTP (Tag: 7 field, lg= ) then SNMP set will fail. If not set via BOOTP then SNMP set will succeed. Value saved across warm boot p…	scalar	RFC1155-SMIIpAddress	`.1.3.6.1.4.1.11.2.4.3.5.5`
npCfgSyslogFacility This specifies the facility identifier used in syslog messages generated by the card.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.6`
npCfgAccessState An indication of whether or not the requesting host is allowed to connect to the card as dictated by the access list.	scalar	Enumeration	`.1.3.6.1.4.1.11.2.4.3.5.7`
npCfgAccessListNum The number of access list entries.	scalar	SNMPv2-SMIInteger32	`.1.3.6.1.4.1.11.2.4.3.5.8`
npCfgAccessListTable List of access addresses and masks.	table	-	`.1.3.6.1.4.1.11.2.4.3.5.9`

Indexes