npCfgLogServer
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.4.3.5.5
Object
The IP address of the Syslog Server. If set via BOOTP (Tag: 7 field, lg= ) then SNMP set will fail. If not set via BOOTP then SNMP set will succeed. Value saved across warm boot power cycles. BOOTP will always overwrite SNMP set values.
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.4.3.5.5- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- npCfg
- Siblings
- 18
Syntax
RFC1155-SMIIpAddress
- Source
- RFC1155-SMIIpAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 4
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| npCfgSource This object indicates how the device obtained its IP configuration. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.5.1 |
| npCfgIdleTimeout The idle timeout is the length in seconds after which an
idle connection is terminated. A value of zero disables
the timeout. Valid time values range from 1 to 3600. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.10 |
| npCfgTcpMss Enumerate as follows:
0 = treat all hosts as local which means JetDirect sends a maximum of
1460 bytes of data in all outbound packets.
1 = treat hosts on different subnets bu… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.11 |
| npCfgSubnetMask The subnet mask associated with the IP address of this card. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.4.3.5.12 |
| npCfgDefaultGateway This variable contains the IP address of the default router for this
card. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.4.3.5.13 |
| npCfgRootURL obsolete The HTTP root(/) directory redirect location. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.5.14 |
| npCfgGenURL obsolete The HTTP /redirect directory location. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.5.15 |
| npCfgDomainName obsolete The JetDirect domain name as configured by Web JetAdmin. | scalar | OctetString | .1.3.6.1.4.1.11.2.4.3.5.16 |
| npCfgSlpTtl The TTL value is used in the IP header of SLP multicast
pkts sent by JetDirect. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.17 |
| npCfgIPP The value can be 0, meaning IPP has been disabled,
or 1, meaning IPP has been enabled. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.18 |
| npCfgMailServerUrl The mail server to which messages originating
from the JetDirect should be sent. The value
is a URL in the form:
protocol://address:port
The protocol and … | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.4.3.5.19 |
| npCfgYiaddr The IP address assigned to the card from the BOOTP reply
yiaddr field. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.4.3.5.2 |
| npCfgSiaddr The IP address of the TFTP server from the BOOTP reply
siaddr field. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.4.3.5.3 |
| npCfgGiaddr The IP address of the TFTP gateway from the BOOTP reply
giaddr field. | scalar | RFC1155-SMIIpAddress | .1.3.6.1.4.1.11.2.4.3.5.4 |
| npCfgSyslogFacility This specifies the facility identifier used in syslog messages
generated by the card. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.6 |
| npCfgAccessState An indication of whether or not the requesting host
is allowed to connect to the card as dictated by the
access list. | scalar | Enumeration | .1.3.6.1.4.1.11.2.4.3.5.7 |
| npCfgAccessListNum The number of access list entries. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.4.3.5.8 |
| npCfgAccessListTable List of access addresses and masks. | table | - | .1.3.6.1.4.1.11.2.4.3.5.9 |