gdStatusEntry
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.3.9.1.1.2
Object
node
No description available.
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.1.1.2- Type
- node
- Parent
- generalDeviceStatus
- Siblings
- 14
- Children
- 23
Syntax
No syntax metadata recorded.
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gdStatusBytes The number of valid bytes in the gdStatusEntry
array. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.1 |
| gdStatusJobTimeout obsolete This value represents (in seconds) the maximum time of
inactivity which must elapse before the JetDirect card
switches from the current network protocol to another when
a normal e… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.10 |
| gdStatusPjlUstatus obsolete This object will enable/disable PJL ustatus.
disabled (0),
enabled (1) | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.11 |
| gdStatusLaaSupport This value represents what protocols Locally Administered
addressing is supported over. This is currently 0 for
802.3 cards and 7 for 802.5 cards. LAA is not supported
on 802.3.… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.12 |
| gdPasswords This object is used as a 256 byte NVRAM area for JetAdmin. It
is completely managed by JetAdmin. Initially it is initialized
to all zeros. A coldboot will re-initialize to all … | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.13 |
| gdStatusAtPrinterName The AppleTalk name of the printer. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.18 |
| gdStatusAtPrinterType obsolete The AppleTalk type of the printer. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.19 |
| gdStatusDisplay The string diplayed on the peripheral front panel.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this is always a zero length string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.3 |
| gdStatusJobName The current job name set by the peripheral.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this is always a zero length string. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.4 |
| gdStatusSource A string indicating the name of the physical port or protocol
the printer is currently getting data from. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.5 |
| gdStatusPapstatus A string indicating the Appletalk papstatus response. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.6 |
| gdStatusId A formatted string describing this peripheral. | scalar | SNMPv2-TCDisplayString | .1.3.6.1.4.1.11.2.3.9.1.1.7 |
| gdStatusDisplayCode obsolete This is the display code that the peripheral uses
to tell the card what type of display the front
panel of the printer is.
Starting with firmware release X.20.06 and s… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.8 |
| gdStatusNlsCode This value is the representation of what native
language the printer is in currently. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.9 |
Child Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gdStatusLineState This describes the line state of the peripheral.
When non-zero, the peripheral is off-line. When
zero the peripheral is on-line. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.1 |
| gdStatusTonerLow This indicates that the peripheral has a low toner condition.
off (0),
toner-low (1),
no-toner-cartridge (2)
For some peripherals, such as the HP LaserJet IIISi printer
or HP Desi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.10 |
| gdStatusPagePunt This indicates that the peripheral did not receive data fast
enough to keep up with the print engine when generating a page.
For some peripherals, such as the HP LaserJet IIISi pr… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.11 |
| gdStatusMemoryOut This indicates that the peripheral did not have enough memory
to render an image on a page.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.12 |
| gdStatusIoActive This indicates that the peripheral is processing data from
this I/O interface card. For some peripherals, such as the
HP LaserJet IIISi printer or HP DesignJet plotter,
this value… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.13 |
| gdStatusBusy This indicates that the peripheral is busy processing
print/plot data.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always a … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.14 |
| gdStatusWait This indicates that the peripheral is waiting for print/plot
data to process.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is al… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.15 |
| gdStatusInitialize This indicates that the peripheral is initializing or
warming up.
off (0),
initializing (1),
warm-up(2)
For some peripherals, such as the HP LaserJet IIISi printer
… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.16 |
| gdStatusDoorOpen This indicates that the peripheral cover or door is open.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always a zero (0). | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.17 |
| gdStatusPrinting This indicates that the peripheral is printing or otherwise
marking or moving paper.
off (0),
ordinary-page (1),
test-fonts-config-or-start-page (2)
For some periph… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.18 |
| gdStatusPaperOutput This indicates that the peripheral has a paper output problem
such as the output storage bin being full.
off (0),
output-storage-full (1)
For some peripherals, such as t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.19 |
| gdStatusPaperState This describes the state of the paper on the peripheral.
When non-zero, the peripheral has a paper problem. When
zero, the peripheral does not have a paper problem. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.2 |
| gdStatusReserved obsolete This is the reserved area that is not currently
used, but will allow for growth within the gdStatusEntry table. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.2.20 |
| gdStatusNovBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.21 |
| gdStatusLlcBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.22 |
| gdStatusTcpBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.23 |
| gdStatusAtBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.24 |
| gdStatusInterventionState This describes the intervention state of the
peripheral. When non-zero, the peripheral requires
human intervention to continue working. When
zero, it requires no assistance. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.3 |
| gdStatusNewMode obsolete This indicates to which read channel state the
card should move. When non-zero, the card should
indicate that the read channel is idle. When zero,
the card should indicate that … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.4 |
| gdStatusConnectionTerminationAck obsolete This indicates whether the peripheral is waiting for
the Connection termination ACK. When non-zero, it
is waiting. When zero, it is not waiting. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.5 |
| gdStatusPeripheralError This is the error code from the peripheral. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.6 |
| gdStatusPaperOut This indicates that the peripheral is out of paper.
off (0),
paper-out-or-paper-mount (1),
manual-paper-feed-needed (2)
For some peripherals, such as the HP LaserJet IIISi printer… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.8 |
| gdStatusPaperJam This indicates that the peripheral has a paper jam.
off (0),
paper-jam(1)
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.9 |