gdStatusDoorOpen
JETDIRECT3-MIB ·
.1.3.6.1.4.1.11.2.3.9.1.1.2.17
Object
scalar
Integer32
This indicates that the peripheral cover or door is open. For some peripherals, such as the HP LaserJet IIISi printer or HP DesignJet plotter, this value is always a zero (0).
Context
- MIB
- JETDIRECT3-MIB
- OID
.1.3.6.1.4.1.11.2.3.9.1.1.2.17- Type
- scalar
- Access
- readonly
- Status
- current
- Parent
- gdStatusEntry
- Siblings
- 22
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| gdStatusLineState This describes the line state of the peripheral.
When non-zero, the peripheral is off-line. When
zero the peripheral is on-line. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.1 |
| gdStatusTonerLow This indicates that the peripheral has a low toner condition.
off (0),
toner-low (1),
no-toner-cartridge (2)
For some peripherals, such as the HP LaserJet IIISi printer
or HP Desi… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.10 |
| gdStatusPagePunt This indicates that the peripheral did not receive data fast
enough to keep up with the print engine when generating a page.
For some peripherals, such as the HP LaserJet IIISi pr… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.11 |
| gdStatusMemoryOut This indicates that the peripheral did not have enough memory
to render an image on a page.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.12 |
| gdStatusIoActive This indicates that the peripheral is processing data from
this I/O interface card. For some peripherals, such as the
HP LaserJet IIISi printer or HP DesignJet plotter,
this value… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.13 |
| gdStatusBusy This indicates that the peripheral is busy processing
print/plot data.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always a … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.14 |
| gdStatusWait This indicates that the peripheral is waiting for print/plot
data to process.
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is al… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.15 |
| gdStatusInitialize This indicates that the peripheral is initializing or
warming up.
off (0),
initializing (1),
warm-up(2)
For some peripherals, such as the HP LaserJet IIISi printer
… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.16 |
| gdStatusPrinting This indicates that the peripheral is printing or otherwise
marking or moving paper.
off (0),
ordinary-page (1),
test-fonts-config-or-start-page (2)
For some periph… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.18 |
| gdStatusPaperOutput This indicates that the peripheral has a paper output problem
such as the output storage bin being full.
off (0),
output-storage-full (1)
For some peripherals, such as t… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.19 |
| gdStatusPaperState This describes the state of the paper on the peripheral.
When non-zero, the peripheral has a paper problem. When
zero, the peripheral does not have a paper problem. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.2 |
| gdStatusReserved obsolete This is the reserved area that is not currently
used, but will allow for growth within the gdStatusEntry table. | scalar | OctetString | .1.3.6.1.4.1.11.2.3.9.1.1.2.20 |
| gdStatusNovBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.21 |
| gdStatusLlcBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.22 |
| gdStatusTcpBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.23 |
| gdStatusAtBusy obsolete This indicates if this channel is active. If the
value is 0 then this channel is active or the peripheral
is idle. If this value is non-zero then another channel
is active. Th… | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.24 |
| gdStatusInterventionState This describes the intervention state of the
peripheral. When non-zero, the peripheral requires
human intervention to continue working. When
zero, it requires no assistance. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.3 |
| gdStatusNewMode obsolete This indicates to which read channel state the
card should move. When non-zero, the card should
indicate that the read channel is idle. When zero,
the card should indicate that … | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.4 |
| gdStatusConnectionTerminationAck obsolete This indicates whether the peripheral is waiting for
the Connection termination ACK. When non-zero, it
is waiting. When zero, it is not waiting. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.5 |
| gdStatusPeripheralError This is the error code from the peripheral. | scalar | Integer32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.6 |
| gdStatusPaperOut This indicates that the peripheral is out of paper.
off (0),
paper-out-or-paper-mount (1),
manual-paper-feed-needed (2)
For some peripherals, such as the HP LaserJet IIISi printer… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.8 |
| gdStatusPaperJam This indicates that the peripheral has a paper jam.
off (0),
paper-jam(1)
For some peripherals, such as the HP LaserJet IIISi printer
or HP DesignJet plotter, this value is always… | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.11.2.3.9.1.1.2.9 |