ipspIpHeadFiltIPv6FlowLabel
IPSEC-POLICY-MIB ·
.1.3.6.1.2.1.153.1.8.1.13
Object
column
r/w
Integer32
The IPv6 Flow Label that the packet must match against.
This object is only used if ipv6FlowLabel is set in
ipspIpHeadFiltType.
Context
- MIB
- IPSEC-POLICY-MIB
- OID
.1.3.6.1.2.1.153.1.8.1.13- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipspIpHeaderFilterEntry
- Table
- ipspIpHeaderFilterTable
- Siblings
- 15
Syntax
Integer32
Values & Constraints
Object Constraints
range: 0-1048575
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipspIpHeadFiltName The administrative name for this filter. | column | OctetString | .1.3.6.1.2.1.153.1.8.1.1 |
| ipspIpHeadFiltDstLowPort The low port of the port range a packet's destination must
match against. To match, the port number must be greater
than or equal to this value.
This object is onl… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.10 |
| ipspIpHeadFiltDstHighPort The high port of the port range a packet's destination must
match against. To match, the port number must be less than
or equal to this value.
This object is only … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.11 |
| ipspIpHeadFiltProtocol The protocol number the incoming packet must match against
for this filter to be evaluated as true.
This object is only used if protocol is set in
ipspIpHeadFiltTyp… | column | Integer32 | .1.3.6.1.2.1.153.1.8.1.12 |
| ipspIpHeadFiltLastChanged The value of sysUpTime when this row was last modified or
created either through SNMP SETs or by some other external
means. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.153.1.8.1.14 |
| ipspIpHeadFiltStorageType The storage type for this row. Rows in this table which were
created through an external process may have a storage type
of readOnly or permanent. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.153.1.8.1.15 |
| ipspIpHeadFiltRowStatus This object indicates the conceptual status of this row.
This object may not be set to active if the requirements of
the ipspIpHeadFiltType object are not met. In … | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.153.1.8.1.16 |
| ipspIpHeadFiltType This defines the various tests that are used when evaluating
a given filter. The results of each test are ANDed together
to produce the result of the entire filter. When process… | column | Bits | .1.3.6.1.2.1.153.1.8.1.2 |
| ipspIpHeadFiltIPVersion The Internet Protocol version the addresses are to match
against. The value of this property determines the size and
format of the ipspIpHeadFiltSrcAddressBegin,
ipspIpHeadFiltSr… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.153.1.8.1.3 |
| ipspIpHeadFiltSrcAddressBegin The starting address of a source address range that the
packet must match against for this filter to be considered
TRUE.
This object is only used if sourceAddress i… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.4 |
| ipspIpHeadFiltSrcAddressEnd The ending address of a source address range to check a
packet against, where the starting is specified by the
ipspIpHeadFiltSrcAddressBegin object. Set this column to the
same v… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.5 |
| ipspIpHeadFiltDstAddressBegin The starting address of a destination address range that the
packet must match against for this filter to be considered
TRUE.
This object is only used if destinatio… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.6 |
| ipspIpHeadFiltDstAddressEnd The ending address of a destination address range to check a
packet against, where the first is specified by the
ipspIpHeadFiltDstAddressBegin object. Set this column to the
same… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.7 |
| ipspIpHeadFiltSrcLowPort The low port of the port range a packet's source must match
against. To match, the port number must be greater than or
equal to this value.
This object is only use… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.8 |
| ipspIpHeadFiltSrcHighPort The high port of the port range a packet's source must match
against. To match, the port number must be less than or
equal to this value.
This object is only used … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.9 |