ipspIpHeadFiltDstAddressEnd
IPSEC-POLICY-MIB ·
.1.3.6.1.2.1.153.1.8.1.7
Object
The ending address of a destination address range to check a packet against, where the first is specified by the ipspIpHeadFiltDstAddressBegin object. Set this column to the same value as the ipspIpHeadFiltDstAddressBegin column to get an exact single address match. This object is only used if destinationAddress is set in ipspIpHeadFiltType.
Context
- MIB
- IPSEC-POLICY-MIB
- OID
.1.3.6.1.2.1.153.1.8.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- ipspIpHeaderFilterEntry
- Table
- ipspIpHeaderFilterTable
- Siblings
- 15
Syntax
INET-ADDRESS-MIBInetAddress
- Source
- INET-ADDRESS-MIBInetAddress
- Base type
OctetString
Values & Constraints
Type Constraints
range: 0..255
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ipspIpHeadFiltName The administrative name for this filter. | column | OctetString | .1.3.6.1.2.1.153.1.8.1.1 |
| ipspIpHeadFiltDstLowPort The low port of the port range a packet's destination must
match against. To match, the port number must be greater
than or equal to this value.
This object is onl… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.10 |
| ipspIpHeadFiltDstHighPort The high port of the port range a packet's destination must
match against. To match, the port number must be less than
or equal to this value.
This object is only … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.11 |
| ipspIpHeadFiltProtocol The protocol number the incoming packet must match against
for this filter to be evaluated as true.
This object is only used if protocol is set in
ipspIpHeadFiltTyp… | column | Integer32 | .1.3.6.1.2.1.153.1.8.1.12 |
| ipspIpHeadFiltIPv6FlowLabel The IPv6 Flow Label that the packet must match against.
This object is only used if ipv6FlowLabel is set in
ipspIpHeadFiltType. | column | Integer32 | .1.3.6.1.2.1.153.1.8.1.13 |
| ipspIpHeadFiltLastChanged The value of sysUpTime when this row was last modified or
created either through SNMP SETs or by some other external
means. | column | SNMPv2-TCTimeStamp | .1.3.6.1.2.1.153.1.8.1.14 |
| ipspIpHeadFiltStorageType The storage type for this row. Rows in this table which were
created through an external process may have a storage type
of readOnly or permanent. | column | SNMPv2-TCStorageType | .1.3.6.1.2.1.153.1.8.1.15 |
| ipspIpHeadFiltRowStatus This object indicates the conceptual status of this row.
This object may not be set to active if the requirements of
the ipspIpHeadFiltType object are not met. In … | column | SNMPv2-TCRowStatus | .1.3.6.1.2.1.153.1.8.1.16 |
| ipspIpHeadFiltType This defines the various tests that are used when evaluating
a given filter. The results of each test are ANDed together
to produce the result of the entire filter. When process… | column | Bits | .1.3.6.1.2.1.153.1.8.1.2 |
| ipspIpHeadFiltIPVersion The Internet Protocol version the addresses are to match
against. The value of this property determines the size and
format of the ipspIpHeadFiltSrcAddressBegin,
ipspIpHeadFiltSr… | column | INET-ADDRESS-MIBInetAddressType | .1.3.6.1.2.1.153.1.8.1.3 |
| ipspIpHeadFiltSrcAddressBegin The starting address of a source address range that the
packet must match against for this filter to be considered
TRUE.
This object is only used if sourceAddress i… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.4 |
| ipspIpHeadFiltSrcAddressEnd The ending address of a source address range to check a
packet against, where the starting is specified by the
ipspIpHeadFiltSrcAddressBegin object. Set this column to the
same v… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.5 |
| ipspIpHeadFiltDstAddressBegin The starting address of a destination address range that the
packet must match against for this filter to be considered
TRUE.
This object is only used if destinatio… | column | INET-ADDRESS-MIBInetAddress | .1.3.6.1.2.1.153.1.8.1.6 |
| ipspIpHeadFiltSrcLowPort The low port of the port range a packet's source must match
against. To match, the port number must be greater than or
equal to this value.
This object is only use… | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.8 |
| ipspIpHeadFiltSrcHighPort The high port of the port range a packet's source must match
against. To match, the port number must be less than or
equal to this value.
This object is only used … | column | INET-ADDRESS-MIBInetPortNumber | .1.3.6.1.2.1.153.1.8.1.9 |