ifStormCtrlBcastRateType
IPI-CUSTOMIF-STATS-MIB ·
.1.3.6.1.4.1.36673.103.1.7.1.4
Object
column
Enumeration
ifStormCtrlBcastRateType defines the storm control rate limit units.
Context
- MIB
- IPI-CUSTOMIF-STATS-MIB
- OID
.1.3.6.1.4.1.36673.103.1.7.1.4- Type
- column
- Access
- readonly
- Status
- current
- Parent
- ifStormCtrlEntry
- Table
- ifStormCtrlTable
- Siblings
- 18
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | percent |
1 | kbps |
2 | mbps |
3 | gbps |
4 | fps |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ifStormCtrlBcastEnable ifStormCtrlBcastEnable defines whether broadcast storm control
is enabled or disabled.
0 - broadcast storm control is enabled
1 - broadcast storm control is disabled | column | Enumeration | .1.3.6.1.4.1.36673.103.1.7.1.1 |
| ifStormCtrlMcastBurst Storm control Multicast burst size.
If burst value is not configured by user then 5ms of bandwidth
rate is programmed internally. Not supported with FPS option | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.10 |
| ifStormCtrlDLFEnable ifStormCtrlDLFEnable defines wthether DLF storm control
is enabled or disabled.
0 - DLF storm control is enabled
1 - DLF storm control is disabled | column | Enumeration | .1.3.6.1.4.1.36673.103.1.7.1.11 |
| ifStormCtrlDLFRate Stormcontrol DLF rate limit configuration. Units are based on
ifStormCtrlDLFRateType object. Units are percentage/Gbps/Mbps/Kbps
/Fps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.12 |
| ifStormCtrlDLFFraction Fraction part if rate-limit is defined as percentage value.
Fraction value will be used along with ifStormCtrlDLFRate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.13 |
| ifStormCtrlDLFRateType ifStormCtrlDLFRateType defines the storm control rate limit units. | column | Enumeration | .1.3.6.1.4.1.36673.103.1.7.1.14 |
| ifStormCtrlDLFBurst Storm control DLF burst size.
If burst value is not configured by user then 5ms of bandwidth
rate is programmed internally. Not supported with FPS option | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.15 |
| ifStormCtrlBcastDiscards Storm control Broadcast Discard packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.103.1.7.1.16 |
| ifStormCtrlMcastDiscards Storm control Multicast Discard packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.103.1.7.1.17 |
| ifStormCtrlDLFDiscards Storm control DLF Discard packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.103.1.7.1.18 |
| ifStormCtrlTotalDiscards Storm control DLF Discard packets count. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.36673.103.1.7.1.19 |
| ifStormCtrlBcastRate Stormcontrol Broadcast rate limit configuration. Units are based on
ifStormCtrlBcastRateType object. Units are percentage/Gbps/Mbps/Kbps
/Fps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.2 |
| ifStormCtrlBcastFraction Fraction part if rate-limit is defined as percentage value.
Fraction value will be used along with ifStormCtrlBcastRate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.3 |
| ifStormCtrlBcastBurst Storm control Broadcast burst size.
If burst value is not configured by user then 5ms of bandwidth
rate is programmed internally. Not supported with FPS option | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.5 |
| ifStormCtrlMcastEnable ifStormCtrlMcastEnable defines whether multicast storm control
is enabled or disabled.
0 - multicast storm control is enabled
1 - multicast storm control is disabled | column | Enumeration | .1.3.6.1.4.1.36673.103.1.7.1.6 |
| ifStormCtrlMcastRate Stormcontrol Multicast rate limit configuration. Units are based on
ifStormCtrlMcastRateType object. Units are percentage/Gbps/Mbps/Kbps
/Fps. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.7 |
| ifStormCtrlMcastFraction Fraction part if rate-limit is defined as percentage value.
Fraction value will be used along with ifStormCtrlMcastRate. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.36673.103.1.7.1.8 |
| ifStormCtrlMcastRateType ifStormCtrlMcastRateType defines the storm control rate limit units. | column | Enumeration | .1.3.6.1.4.1.36673.103.1.7.1.9 |