ifStormCtrlBcastBurst

IPI-CUSTOMIF-STATS-MIB · .1.3.6.1.4.1.36673.103.1.7.1.5
MIB view Table view

Object

column SNMPv2-SMIInteger32 
Storm control Broadcast burst size.
If burst value is not configured by user then 5ms of bandwidth
rate is programmed internally. Not supported with FPS option

Context

MIB
IPI-CUSTOMIF-STATS-MIB
OID
.1.3.6.1.4.1.36673.103.1.7.1.5
Type
column
Access
readonly
Status
current
Parent
ifStormCtrlEntry
Table
ifStormCtrlTable
Siblings
18

Syntax

SNMPv2-SMIInteger32
Source
SNMPv2-SMIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
ifStormCtrlBcastEnable
ifStormCtrlBcastEnable defines whether broadcast storm control is enabled or disabled. 0 - broadcast storm control is enabled 1 - broadcast storm control is disabled
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.1
ifStormCtrlMcastBurst
Storm control Multicast burst size. If burst value is not configured by user then 5ms of bandwidth rate is programmed internally. Not supported with FPS option
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.10
ifStormCtrlDLFEnable
ifStormCtrlDLFEnable defines wthether DLF storm control is enabled or disabled. 0 - DLF storm control is enabled 1 - DLF storm control is disabled
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.11
ifStormCtrlDLFRate
Stormcontrol DLF rate limit configuration. Units are based on ifStormCtrlDLFRateType object. Units are percentage/Gbps/Mbps/Kbps /Fps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.12
ifStormCtrlDLFFraction
Fraction part if rate-limit is defined as percentage value. Fraction value will be used along with ifStormCtrlDLFRate.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.13
ifStormCtrlDLFRateType
ifStormCtrlDLFRateType defines the storm control rate limit units.
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.14
ifStormCtrlDLFBurst
Storm control DLF burst size. If burst value is not configured by user then 5ms of bandwidth rate is programmed internally. Not supported with FPS option
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.15
ifStormCtrlBcastDiscards
Storm control Broadcast Discard packets count.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.36673.103.1.7.1.16
ifStormCtrlMcastDiscards
Storm control Multicast Discard packets count.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.36673.103.1.7.1.17
ifStormCtrlDLFDiscards
Storm control DLF Discard packets count.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.36673.103.1.7.1.18
ifStormCtrlTotalDiscards
Storm control DLF Discard packets count.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.36673.103.1.7.1.19
ifStormCtrlBcastRate
Stormcontrol Broadcast rate limit configuration. Units are based on ifStormCtrlBcastRateType object. Units are percentage/Gbps/Mbps/Kbps /Fps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.2
ifStormCtrlBcastFraction
Fraction part if rate-limit is defined as percentage value. Fraction value will be used along with ifStormCtrlBcastRate.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.3
ifStormCtrlBcastRateType
ifStormCtrlBcastRateType defines the storm control rate limit units.
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.4
ifStormCtrlMcastEnable
ifStormCtrlMcastEnable defines whether multicast storm control is enabled or disabled. 0 - multicast storm control is enabled 1 - multicast storm control is disabled
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.6
ifStormCtrlMcastRate
Stormcontrol Multicast rate limit configuration. Units are based on ifStormCtrlMcastRateType object. Units are percentage/Gbps/Mbps/Kbps /Fps.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.7
ifStormCtrlMcastFraction
Fraction part if rate-limit is defined as percentage value. Fraction value will be used along with ifStormCtrlMcastRate.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.36673.103.1.7.1.8
ifStormCtrlMcastRateType
ifStormCtrlMcastRateType defines the storm control rate limit units.
columnEnumeration.1.3.6.1.4.1.36673.103.1.7.1.9