cmmTransQSFPOptionsImp

IPI-CMM-CHASSIS-MIB · .1.3.6.1.4.1.36673.100.1.2.2.1.40

Object

column Bits

Transceiver Options Implemented for QSFP Transceiver.

Context

MIB: IPI-CMM-CHASSIS-MIB
OID: .1.3.6.1.4.1.36673.100.1.2.2.1.40
Type: column
Access: readonly
Status: current
Parent: cmmTransEEPROMEntry
Table: cmmTransEEPROMTable
Siblings: 58

Syntax

Bits

Values & Constraints

Enumerated Values

`0`	reserved
`1`	tx-inputequalization-auto-adaptive
`2`	tx-inputequalization-fixed-programmable
`3`	tx-outputemphasis-fixed-programmable
`4`	tx-outputamplitude-fixed-programmable
`5`	tx-cdr-on-or-off-controllable
`6`	tx-cdr-on-or-off-fixed
`7`	rx-cdr-on-or-off-controllable
`8`	rx-cdr-on-or-off-fixed
`9`	tx-cdr-lossoflock
`10`	rx-cdr-lossoflock
`11`	rx-squelch-disable
`12`	rx-output-disable
`13`	tx-squelch-disable
`14`	tx-squelch
`15`	page2-provided
`16`	page1-provided
`17`	rateselect-controllable
`18`	rateselect-fixed
`19`	tx-disable
`20`	tx-fault
`21`	tx-squelch-to-reduce-pave
`22`	tx-squelch-to-reduce-oma
`23`	tx-loss-of-signal
`30`	unavailable
`31`	not-applicable

Related Objects

Sibling Objects

Object	Type	Syntax	OID
cmmTransIndex A unique value, greater than zero,for each slot within the unit	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.1`
cmmTransSonetCompliance Sonet Compliance codes of transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.10`
cmmTransFiberChnlLinkLen Fiber Channel Link Length.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.11`
cmmTransFiberChnlTransTech Fiber Channel Transmitter Technology.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.12`
cmmTransFiberChnlTransMedia Fiber Channel Transmitter Media.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.13`
cmmTransSFPFiberChnlSpeed SFP Fiber Channel Speed.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.14`
cmmTransQSFPFiberChnlSpeed QSFP Fiber Channel Speed.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.15`
cmmTransSFPInfiniBandCompliance SFP InfiniBand Compliance.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.16`
cmmTransSFPEsconCompliance SFP Enterprise Systems Connection compliance.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.17`
cmmTransSfpPlusCableTech SFP+ Cable Technology.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.18`
cmmTransEncoding Code for SFP/QSFP high speed serial encoding algorithm.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.19`
cmmTransType Transceiver type	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.2`
cmmTransLengthKmtrs Link length supported for single mode fiber, units of km. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	km Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.20`
cmmTransLengthMtrs Link length supported for single mode fiber, units of 100 m. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	100 m Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.21`
cmmTransLengthOM1 Link length supported for 62.5 um OM1 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	10 m Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.22`
cmmTransLengthOM2 Link length supported for 50 um OM2 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	10 m Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.23`
cmmTransLengthOM3 Link length supported for 50 um OM3 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	10 m Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.24`
cmmTransLengthOM4 Link length supported for 50 um OM4 fiber, units of 10 m. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	10 m Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.25`
cmmTransVendorName Transceiver vendor name. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.26`
cmmTransVendorOUI Transceiver vendor IEEE company ID. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.27`
cmmTransVendorPartNumber Part number provided by tarnsceiver vendor. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.28`
cmmTransVendorRevision Revision level for part number provided by vendor. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.29`
cmmTransNoOfChannels Number of channels available for this transceiver. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.3`
cmmTransCheckCode Check code for Base ID Fields. Blank indicates unavailable	column	OctetString	`.1.3.6.1.4.1.36673.100.1.2.2.1.30`
cmmTransCheckCodeExtended Check code for the Extended ID Fields. Blank indicates unavailable	column	OctetString	`.1.3.6.1.4.1.36673.100.1.2.2.1.31`
cmmTransNominalBitRate Nominal signalling rate, units of 100MBd. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	100MBd Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.32`
cmmTransBitRateMax Upper bit rate margin, units of 1% above the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.33`
cmmTransBitRateMin Lower bit rate margin, units of 1% below the Nominal Bit Rate. Value '0' indicates this field is not specified. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.34`
cmmTransVendorSerialNumber Serial number provided by vendor. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.35`
cmmTransDateCode Vendor's manufacturing date code. Blank indicates unavailable	column	SNMPv2-TCDisplayString	`.1.3.6.1.4.1.36673.100.1.2.2.1.36`
cmmTransDDMSupport Indicates whether diagnostics monitoring is supported or not. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.37`
cmmTransMaxCaseTemp Maximum case temperature in Celsius. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	0.01 C Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.38`
cmmTransSFPOptionsImp Transceiver Options Implemented for SFP Transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.39`
cmmTransidentifier The Type of transceiver present eg:SFP/SFP+/SFP28/QSFP/QSFP+/QSFP28.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.4`
cmmTransPresence Indicates Transceiver presence status.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.41`
cmmTransFrontPanelPortNumber Front panel port number	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.42`
cmmTransXFPextendedidentifier XFP transceiver extended identifier to provide extra information.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.43`
cmmTransXFP10GEthCompliance 10G ethernet compliant interface supported by XFP transceiver	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.44`
cmmTransXFP10GFiberChnCompliance 10G fiber channel interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.45`
cmmTransXFP10GCopperLinksRsvd 10G copper link interface supported by XFP transceiver (Not used).	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.46`
cmmTransXFPLowerSpeedLinks Low speed interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.47`
cmmTransXFPSonetInterconnect SONETinterconnect interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.48`
cmmTransXFPSonetShortHaul SONET short haul interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.49`
cmmTransSFPextendedidentifier Extended identifier of SFP transceiver for additional information.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.5`
cmmTransXFPSonetLongHaul SONET long haul interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.50`
cmmTransXFPSonetVeryLongHaul SONET very long haul interface supported by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.51`
cmmTransXFPOptionsImp Optional enhanced features implemented by XFP transceiver.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.52`
cmmTransXFPVoltageAuxMonitor XFP Voltages monitored by auxiliary measurements.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.53`
cmmTransXFPEncoding Code for XFP high speed serial encoding algorithm.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.54`
cmmTransWavelength Transceiver Wavelength in 0.01 nm. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	0.001 nm Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.55`
cmmTransChannelNumber Transceiver Frequency channel number. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.56`
cmmTransGridSpacing Transceiver Grid Spacing 0.01 GHz. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	0.01 GHz Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.57`
cmmTransLaserFirstFrequency Laser first frequency in 0.01 GHz. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	0.01 GHz Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.58`
cmmTransLaserLastFrequency Laser last frequency in 0.01 GHz. '-100001' indicates unavailable '-100002' indicates not-applicable.	column	0.01 GHz Integer32	`.1.3.6.1.4.1.36673.100.1.2.2.1.59`
cmmTransQSFPextendedidentifier Extended identifier of QSFP transceiver for additional information.	column	Bits	`.1.3.6.1.4.1.36673.100.1.2.2.1.6`
cmmTransconnectortype Connector type for the transceiver.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.7`
cmmTransEthCompliance Values of Ethernet Compliance codes.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.8`
cmmTransExtEthCompliance Bitmap of Extended Ethernet Compliance codes.	column	Enumeration	`.1.3.6.1.4.1.36673.100.1.2.2.1.9`