upsManufacturer
INFRATEC-RMS-MIB ·
.1.3.6.1.4.1.1909.10.22.2
Object
scalar
mandatory
OctetString
The name of the UPS manufacturer.
Context
- MIB
- INFRATEC-RMS-MIB
- OID
.1.3.6.1.4.1.1909.10.22.2- Type
- scalar
- Access
- readonly
- Status
- mandatory
- Parent
- ups
- Siblings
- 20
Syntax
OctetString
Values & Constraints
Object Constraints
range: 0-31
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| upsConnected mandatory Shows if ups is connected to AUX on the RMS | scalar | Enumeration | .1.3.6.1.4.1.1909.10.22.1 |
| upsBatteryVoltage mandatory The magnitude of the present battery voltage. | scalar | 0.1 Volt DC | .1.3.6.1.4.1.1909.10.22.10 |
| upsBatteryCurrent mandatory The present battery current. | scalar | 0.1 Amp DC Integer32 | .1.3.6.1.4.1.1909.10.22.11 |
| upsBatteryTemp mandatory The ambient temperature at or near the UPS Battery
casing. | scalar | degrees Centigrade Integer32 | .1.3.6.1.4.1.1909.10.22.12 |
| upsBatteryStatus mandatory The indication of the capacity remaining in the UPS
system's batteries. A value of batteryNormal
indicates that the remaining run-time is greater than
upsConfigLowBattTime. A v… | scalar | Enumeration | .1.3.6.1.4.1.1909.10.22.13 |
| upsLineFrequency mandatory The present input frequency. | scalar | 0.1 Hertz | .1.3.6.1.4.1.1909.10.22.14 |
| upsLineVoltage mandatory The magnitude of the present input voltage. | scalar | RMS Volts | .1.3.6.1.4.1.1909.10.22.15 |
| upsOutputVoltage mandatory The present output voltage. | scalar | RMS Volts | .1.3.6.1.4.1.1909.10.22.16 |
| upsNominalOutputVoltage mandatory The magnitude of the nominal output voltage. On
those systems which support read-write access to this
object, if there is an attempt to set this variable to
a value that is not s… | scalar | RMS Volts | .1.3.6.1.4.1.1909.10.22.17 |
| upsOnline mandatory | scalar | Integer32 | .1.3.6.1.4.1.1909.10.22.18 |
| upsCalibrating mandatory | scalar | Integer32 | .1.3.6.1.4.1.1909.10.22.19 |
| upsSleeping mandatory | scalar | Integer32 | .1.3.6.1.4.1.1909.10.22.20 |
| upsLoad mandatory | scalar | Integer32 | .1.3.6.1.4.1.1909.10.22.21 |
| upsModel mandatory The UPS Model designation. | scalar | OctetString | .1.3.6.1.4.1.1909.10.22.3 |
| upsFirmwareVersion mandatory The UPS firmware/software version(s). This variable
may or may not have the same value as
upsIdentAgentSoftwareVersion in some implementations. | scalar | OctetString | .1.3.6.1.4.1.1909.10.22.4 |
| upsSoftwareVersion mandatory The UPS agent software version. This variable may or
may not have the same value as
upsIdentUPSSoftwareVersion in some implementations. | scalar | OctetString | .1.3.6.1.4.1.1909.10.22.5 |
| upsID mandatory The UPS Serial Number | scalar | OctetString | .1.3.6.1.4.1.1909.10.22.6 |
| upsBatteryLastReplaced mandatory | scalar | Integer32 | .1.3.6.1.4.1.1909.10.22.7 |
| upsTimeOnBattery mandatory If the unit is on battery power, the elapsed time
since the UPS last switched to battery power, or the
time since the network management subsystem was last
restarted, whichever is… | scalar | seconds | .1.3.6.1.4.1.1909.10.22.8 |
| upsTimeRemaining mandatory An estimate of the time to battery charge depletion
under the present load conditions if the utility power
is off and remains off, or if it were to be lost and
remain off. | scalar | minutes | .1.3.6.1.4.1.1909.10.22.9 |