dchCtpTribPrbsGenMode
INFINERA-TP-DCHCTP-MIB ·
.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.1
Object
column
r/w
Enumeration
Flag which enables the generation of PRBS data on the transmit side.
Context
- MIB
- INFINERA-TP-DCHCTP-MIB
- OID
.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.1- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- dchCtpEntry
- Table
- dchCtpTable
- Siblings
- 27
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disabled |
2 | enabled |
3 | unknown |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| dchCtpPreFecThresholdOrder Pre-FEC BER threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.10 |
| dchCtpDataPlaneTransparency This attribute captures whether or not the data traffic
arriving via this DchCTP is transported transparently by the receiving
network element. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.11 |
| dchCtpSignalDegradeReportingControl Controls whether or not the signal degrade condition is reported. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.12 |
| dchCtpDtsFecSupport This attribute controls whether or not the High Gain
Infinera FEC is enabled for this DTS. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.13 |
| dchCtpPreFecThresholdMantissa The mantissa for the BER threshold used to declare PRE-FEC-BER-SD.
This parameter, together with the attribute preFecThreshold-Order, completely
specifies the BER threshold. | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.14 |
| dchCtpDtsCv15MinutesTce Count of BIP errors detected at the DTF Path layer. Up to 8
path BIP errors can be detected per frame, with each error incrementing
the DTFDLM- CV-S current register. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.15 |
| dchCtpDtsEs15MinutesTce Count of the number of seconds during which (at any point
during the second) at least one DTF Path layer BIP error was detected or
an AISP, DTPLOF or POST FEC SF BER defect was … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.16 |
| dchCtpDtsSes15MinutesTce Count of the seconds during which K (= 2,400 as specified
in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were
detected or an AIS-P, DTPLOF or POST FEC S… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.17 |
| dchCtpDtsCvDayTce Count of BIP errors detected at the DTF Path layer. Up to
8 path BIP errors can be detected per frame, with each error incrementing
the DTFDLM-CV-S current register. | column | SNMPv2-SMICounter64 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.18 |
| dchCtpDtsEsDayTce Count of the number of seconds during which (at any point
during the second) at least one DTF Path layer BIP error was detected or
an AIS-P, DTPLOF or POST FEC SF BER defect was … | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.19 |
| dchCtpTribPrbsMonMode Flag which enables the monitoring of bit errors. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.2 |
| dchCtpDtsSesDayTce Count of the seconds during which K (= 2,400 as specified
in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors
were detected or an AIS-P, DTP-LOF or POST FEC S… | column | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.20 |
| dchCtpDtsCv15MinutesTceReporting Flag that enables the reporting of DtsCv15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.21 |
| dchCtpDtsEs15MinutesTceReporting Flag that enables the reporting of DtsEs15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.22 |
| dchCtpDtsSes15MinutesTceReporting Flag that enables the reporting of DtsSes15MinutesTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.23 |
| dchCtpDtsCvDayTceReporting Flag that enables the reporting of DtsCvDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.24 |
| dchCtpDtsEsDayTceReporting Flag that enables the reporting of DtsEsDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.25 |
| dchCtpDtsSesDayTceReporting Flag that enables the reporting of DtsSesDayTce crossing. | column | SNMPv2-TCTruthValue | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.26 |
| dchCtpPmHistStatsEnable This objects control the historical PM collection. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.27 |
| dchCtpConnectivityVerification This objects control the reporting of connectivity verification alarm. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.28 |
| dchCtpSupportingCircuitIdList An unordered list of the CircuitId's associated with DchCtp.
This string contains the string representation of each supporting CircuitId,
separated by a ' ' (space) if there is m… | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.3 |
| dchCtpLoopback Flag to enable the loopback. | column | INFINERA-TC-MIBInfnLoopbackType | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.4 |
| dchCtpConfiguredServiceType The configured service type. | column | INFINERA-TC-MIBInfnServiceType | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.5 |
| dchCtpExpectedDtsTTI The expected Dts trail trace identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.6 |
| dchCtpDtsTTIMismatchReporting Flag that indicates if TTI alarm should be reported or not. | column | Enumeration | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.7 |
| dchCtpTxDtsTTI The transmitted Dts trail trace identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.8 |
| dchCtpRxDtsTTI The received Dts trail trace identifier. | column | SNMPv2-TCDisplayString | .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.9 |