dchCtpDataPlaneTransparency

INFINERA-TP-DCHCTP-MIB · .1.3.6.1.4.1.21296.2.2.2.2.18.1.1.11
MIB view Table view

Object

column r/w Enumeration 
This attribute captures whether or not the data traffic
arriving via this DchCTP is transported transparently by the receiving 
network element.

Context

MIB
INFINERA-TP-DCHCTP-MIB
OID
.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.11
Type
column
Access
readwrite
Status
current
Parent
dchCtpEntry
Table
dchCtpTable
Siblings
27

Syntax

Enumeration

Values & Constraints

Enumerated Values
1disabled
2enabled
3unknown

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
dchCtpTribPrbsGenMode
Flag which enables the generation of PRBS data on the transmit side.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.1
dchCtpPreFecThresholdOrder
Pre-FEC BER threshold.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.10
dchCtpSignalDegradeReportingControl
Controls whether or not the signal degrade condition is reported.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.12
dchCtpDtsFecSupport
This attribute controls whether or not the High Gain Infinera FEC is enabled for this DTS.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.13
dchCtpPreFecThresholdMantissa
The mantissa for the BER threshold used to declare PRE-FEC-BER-SD. This parameter, together with the attribute preFecThreshold-Order, completely specifies the BER threshold.
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.14
dchCtpDtsCv15MinutesTce
Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM- CV-S current register.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.15
dchCtpDtsEs15MinutesTce
Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AISP, DTPLOF or POST FEC SF BER defect was …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.16
dchCtpDtsSes15MinutesTce
Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTPLOF or POST FEC S…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.17
dchCtpDtsCvDayTce
Count of BIP errors detected at the DTF Path layer. Up to 8 path BIP errors can be detected per frame, with each error incrementing the DTFDLM-CV-S current register.
columnSNMPv2-SMICounter64.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.18
dchCtpDtsEsDayTce
Count of the number of seconds during which (at any point during the second) at least one DTF Path layer BIP error was detected or an AIS-P, DTPLOF or POST FEC SF BER defect was …
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.19
dchCtpTribPrbsMonMode
Flag which enables the monitoring of bit errors.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.2
dchCtpDtsSesDayTce
Count of the seconds during which K (= 2,400 as specified in GR-253-CORE Issue 3 specification) or more DTF Path layer BIP errors were detected or an AIS-P, DTP-LOF or POST FEC S…
columnSNMPv2-SMIInteger32.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.20
dchCtpDtsCv15MinutesTceReporting
Flag that enables the reporting of DtsCv15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.21
dchCtpDtsEs15MinutesTceReporting
Flag that enables the reporting of DtsEs15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.22
dchCtpDtsSes15MinutesTceReporting
Flag that enables the reporting of DtsSes15MinutesTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.23
dchCtpDtsCvDayTceReporting
Flag that enables the reporting of DtsCvDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.24
dchCtpDtsEsDayTceReporting
Flag that enables the reporting of DtsEsDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.25
dchCtpDtsSesDayTceReporting
Flag that enables the reporting of DtsSesDayTce crossing.
columnSNMPv2-TCTruthValue.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.26
dchCtpPmHistStatsEnable
This objects control the historical PM collection.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.27
dchCtpConnectivityVerification
This objects control the reporting of connectivity verification alarm.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.28
dchCtpSupportingCircuitIdList
An unordered list of the CircuitId's associated with DchCtp. This string contains the string representation of each supporting CircuitId, separated by a ' ' (space) if there is m…
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.3
dchCtpLoopback
Flag to enable the loopback.
columnINFINERA-TC-MIBInfnLoopbackType.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.4
dchCtpConfiguredServiceType
The configured service type.
columnINFINERA-TC-MIBInfnServiceType.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.5
dchCtpExpectedDtsTTI
The expected Dts trail trace identifier.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.6
dchCtpDtsTTIMismatchReporting
Flag that indicates if TTI alarm should be reported or not.
columnEnumeration.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.7
dchCtpTxDtsTTI
The transmitted Dts trail trace identifier.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.8
dchCtpRxDtsTTI
The received Dts trail trace identifier.
columnSNMPv2-TCDisplayString.1.3.6.1.4.1.21296.2.2.2.2.18.1.1.9