ibmpppLinkPhysical
IBM6611-MIB ·
.1.3.6.1.4.1.2.6.2.10.2.1.13
Object
column
mandatory
ObjectIdentifier
A reference to MIB definitions specific to the particular
physical interface type (e.g. T1) being used by the PPP
Link. If the agent is unable to obtain this information,
the value of this object will be set to the OBJECT
IDENTIFIER { 0 0 }, which is a syntatically valid
object identifier, and any conformant
implementation of ASN.1 and BER must be able to
generate and recognize this value.
Context
- MIB
- IBM6611-MIB
- OID
.1.3.6.1.4.1.2.6.2.10.2.1.13- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ibmpppLinkStatusEntry
- Table
- ibmpppLinkStatusTable
- Siblings
- 12
Syntax
ObjectIdentifier
Values & Constraints
No enumerated values or constraints recorded.
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmpppLinkStatusIndex mandatory A unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same… | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.1 |
| ibmpppLinkACCompression mandatory Indicates the Address/Control Field compression that has
been configured on the link. Receive-only(1) indicates
that this node can receive compressed packets but won't
send them. … | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.10 |
| ibmpppLinkMeasurementsValid mandatory The current value of the Measurements-Valid state
variable used for Link-Quality Management. See section
3.5, page 19, of RFC 1172. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.11 |
| ibmpppLinkQuality mandatory The current quality of the link as declared by the nodes
Link-Quality Management modules. No effort is made to
define good or bad, nor the policy used to determine it. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.12 |
| ibmpppLinkVersion mandatory The version of LCP that is being run over this link
(per RFC 1171). This value currently must be 1. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.2 |
| ibmpppLinkCurrentState mandatory The current state of the link automaton. See section
4.1.3. 'State Transition Table' on page 13 of RFC 1171. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.3 |
| ibmpppLinkPreviousState mandatory The immediately previous state of the link automaton. See
section 4.1.3. 'State Transition Table' on page 13 of
RFC 1171. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.4 |
| ibmpppLinkChangeTime mandatory The value of sysUpTime when the state of the link
automaton last changed. | column | RFC1155-SMITimeTicks | .1.3.6.1.4.1.2.6.2.10.2.1.5 |
| ibmpppLinkMagicNumber mandatory This node's Magic Number. See section 2.4, page 7, 'Magic
Number' of RFC 1172. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.6 |
| ibmpppLinkLocalQualityPeriod mandatory This is the maximum interval at which this node will
transmit Link-Quality-Report Packets. See section 2.5, on
page 10 of RFC 1172. This object is in units of
microseconds. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.7 |
| ibmpppLinkRemoteQualityPeriod mandatory This is the maximum interval at which this node expects
that the other node will transmit Link-Quality-Report
Packets. See section 2.5, on page 10 of RFC 1172. This
object is in… | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.8 |
| ibmpppLinkProtocolCompression mandatory Indicates the Protocol compression that has been
configured on the link. Receive-only(1) indicates that
this node can receive compressed packets but won't send
them. Send-only(2) … | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.9 |