ibmpppLinkChangeTime
IBM6611-MIB ·
.1.3.6.1.4.1.2.6.2.10.2.1.5
Object
The value of sysUpTime when the state of the link automaton last changed.
Context
- MIB
- IBM6611-MIB
- OID
.1.3.6.1.4.1.2.6.2.10.2.1.5- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- ibmpppLinkStatusEntry
- Table
- ibmpppLinkStatusTable
- Siblings
- 12
Syntax
RFC1155-SMITimeTicks
- Source
- RFC1155-SMITimeTicks
- Base type
Unsigned32
Values & Constraints
Type Constraints
range: 0..4294967295
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmpppLinkStatusIndex mandatory A unique value for each PPP link. Its value ranges
between 1 and the value of ifNumber. The interface
identified by a particular value of this index is that
identified by the same… | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.1 |
| ibmpppLinkACCompression mandatory Indicates the Address/Control Field compression that has
been configured on the link. Receive-only(1) indicates
that this node can receive compressed packets but won't
send them. … | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.10 |
| ibmpppLinkMeasurementsValid mandatory The current value of the Measurements-Valid state
variable used for Link-Quality Management. See section
3.5, page 19, of RFC 1172. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.11 |
| ibmpppLinkQuality mandatory The current quality of the link as declared by the nodes
Link-Quality Management modules. No effort is made to
define good or bad, nor the policy used to determine it. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.12 |
| ibmpppLinkPhysical mandatory A reference to MIB definitions specific to the particular
physical interface type (e.g. T1) being used by the PPP
Link. If the agent is unable to obtain this information,
the val… | column | ObjectIdentifier | .1.3.6.1.4.1.2.6.2.10.2.1.13 |
| ibmpppLinkVersion mandatory The version of LCP that is being run over this link
(per RFC 1171). This value currently must be 1. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.2 |
| ibmpppLinkCurrentState mandatory The current state of the link automaton. See section
4.1.3. 'State Transition Table' on page 13 of RFC 1171. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.3 |
| ibmpppLinkPreviousState mandatory The immediately previous state of the link automaton. See
section 4.1.3. 'State Transition Table' on page 13 of
RFC 1171. | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.4 |
| ibmpppLinkMagicNumber mandatory This node's Magic Number. See section 2.4, page 7, 'Magic
Number' of RFC 1172. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.6 |
| ibmpppLinkLocalQualityPeriod mandatory This is the maximum interval at which this node will
transmit Link-Quality-Report Packets. See section 2.5, on
page 10 of RFC 1172. This object is in units of
microseconds. | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.7 |
| ibmpppLinkRemoteQualityPeriod mandatory This is the maximum interval at which this node expects
that the other node will transmit Link-Quality-Report
Packets. See section 2.5, on page 10 of RFC 1172. This
object is in… | column | Integer32 | .1.3.6.1.4.1.2.6.2.10.2.1.8 |
| ibmpppLinkProtocolCompression mandatory Indicates the Protocol compression that has been
configured on the link. Receive-only(1) indicates that
this node can receive compressed packets but won't send
them. Send-only(2) … | column | Enumeration | .1.3.6.1.4.1.2.6.2.10.2.1.9 |