cylinkSecondaryPhone

IBM6611-MIB · .1.3.6.1.4.1.2.6.2.3.1.3.1.19
MIB view Table view

Object

column mandatory OctetString 
The secondary telephone number used by by the CSU
to contact the NMS.

Context

MIB
IBM6611-MIB
OID
.1.3.6.1.4.1.2.6.2.3.1.3.1.19
Type
column
Access
readonly
Status
mandatory
Parent
cylinkConfigEntry
Table
cylinkConfigTable
Siblings
21

Syntax

OctetString

Values & Constraints

Object Constraints
range: 0-19

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cylinkConfigIndex mandatory
The index value which uniquely identifies the CSU to which this entry is applicable. The CSU identified by a particular value of this index is the same CSU as identified by the sa…
columnInteger32.1.3.6.1.4.1.2.6.2.3.1.3.1.1
cylinkZeroProtection mandatory
The Consecutive Zero Control selected (15, or 80). This determines the the maximum number of consecutive zeros allowed in the data stream before a one is forced.
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.10
cylinkClockSource mandatory
The transmit clock source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.11
cylinkClockFrequency mandatory
The external clock frequency selected (56 kHz, 256 kHz, 1.344 MHz, 1.544 MHz).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.12
cylinkClockBackup mandatory
The transmit clock backup source selected for NRZ DIUs (network, DTE, an external clock, or the CSU's internal clock).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.13
cylinkDIUFrequency mandatory
The DIU frequency selected for NRZ DIUs (767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.14
cylinkDIUTiming mandatory
The DIU transmit timing selected for NRZ DIUs (Send Timing, or Terminal Timing).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.15
cylinkDialoutCapability mandatory
The DIU dial-out capability selected (polled, tone, or pulse).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.16
cylinkDialoutHoldoff mandatory
The mininum time, in minutes, between successful CSU-to-NMS connections to report alarm conditions.
columnInteger32.1.3.6.1.4.1.2.6.2.3.1.3.1.17
cylinkPrimaryPhone mandatory
The primary telephone number used by by the CSU to contact the NMS.
columnOctetString.1.3.6.1.4.1.2.6.2.3.1.3.1.18
cylinkSerialNumber mandatory
The manufacturer's serial number of this CSU.
columnInteger32.1.3.6.1.4.1.2.6.2.3.1.3.1.2
cylinkAlarmRepeatTime mandatory
The interval, in minutes, that the CSU will insert duplicate messages in the alarm queue for persistant alarm conditions.
columnInteger32.1.3.6.1.4.1.2.6.2.3.1.3.1.20
cylinkESThreshold mandatory
The threshold, in seconds, for the errored second value in the current 15-minute interval.
columnInteger32.1.3.6.1.4.1.2.6.2.3.1.3.1.21
cylinkSecondaryContact mandatory
The state of the CSU secondary contact (open or closed).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.22
cylinkSoftwareVersion mandatory
The version number of the microcode running in the CSU.
columnOctetString.1.3.6.1.4.1.2.6.2.3.1.3.1.3
cylinkDTEFraming mandatory
The DTE framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.4
cylinkNetworkFraming mandatory
The network framing selected (D4, or ESF). Framing conversion is automatically performed at both ends if the DTE is D4 framed and the network interface is ESF framed.
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.5
cylinkDTEDS1Mode mandatory
The DTE DS-1 mode selected (B8ZS, or AMI).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.6
cylinkNetworkDS1Mode mandatory
The network DS-1 mode selected (B8ZS, or AMI).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.7
cylinkOnesResponsibility mandatory
The component selected for Ones Density Responsibility (DTE, or CSU.
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.8
cylinkOnesControl mandatory
The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL).
columnEnumeration.1.3.6.1.4.1.2.6.2.3.1.3.1.9