cylinkNetworkDS1Mode
IBM6611-MIB ·
.1.3.6.1.4.1.2.6.2.3.1.3.1.7
Object
column
mandatory
Enumeration
The network DS-1 mode selected (B8ZS, or AMI).
Context
- MIB
- IBM6611-MIB
- OID
.1.3.6.1.4.1.2.6.2.3.1.3.1.7- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cylinkConfigEntry
- Table
- cylinkConfigTable
- Siblings
- 21
Syntax
Enumeration
Values & Constraints
Enumerated Values
0 | cylinkNetworkDS1ModeB8ZS |
1 | cylinkNetworkDS1ModeAMI |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cylinkConfigIndex mandatory The index value which uniquely identifies the
CSU to which this entry is applicable. The
CSU identified by a particular value of
this index is the same CSU as identified
by the sa… | column | Integer32 | .1.3.6.1.4.1.2.6.2.3.1.3.1.1 |
| cylinkZeroProtection mandatory The Consecutive Zero Control selected (15, or 80).
This determines the the maximum number of consecutive
zeros allowed in the data stream before a one is forced. | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.10 |
| cylinkClockSource mandatory The transmit clock source selected for NRZ DIUs
(network, DTE, an external clock, or the CSU's
internal clock). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.11 |
| cylinkClockFrequency mandatory The external clock frequency selected (56 kHz, 256 kHz,
1.344 MHz, 1.544 MHz). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.12 |
| cylinkClockBackup mandatory The transmit clock backup source selected for NRZ DIUs
(network, DTE, an external clock, or the CSU's internal
clock). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.13 |
| cylinkDIUFrequency mandatory The DIU frequency selected for NRZ DIUs
(767 kbps, 1.244 Mbps, 1.528 Mbps, 1.536 Mbps). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.14 |
| cylinkDIUTiming mandatory The DIU transmit timing selected for NRZ DIUs
(Send Timing, or Terminal Timing). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.15 |
| cylinkDialoutCapability mandatory The DIU dial-out capability selected (polled,
tone, or pulse). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.16 |
| cylinkDialoutHoldoff mandatory The mininum time, in minutes, between successful
CSU-to-NMS connections to report alarm conditions. | column | Integer32 | .1.3.6.1.4.1.2.6.2.3.1.3.1.17 |
| cylinkPrimaryPhone mandatory The primary telephone number used by by the CSU to contact
the NMS. | column | OctetString | .1.3.6.1.4.1.2.6.2.3.1.3.1.18 |
| cylinkSecondaryPhone mandatory The secondary telephone number used by by the CSU
to contact the NMS. | column | OctetString | .1.3.6.1.4.1.2.6.2.3.1.3.1.19 |
| cylinkSerialNumber mandatory The manufacturer's serial number of this CSU. | column | Integer32 | .1.3.6.1.4.1.2.6.2.3.1.3.1.2 |
| cylinkAlarmRepeatTime mandatory The interval, in minutes, that the CSU will insert
duplicate messages in the alarm queue for persistant
alarm conditions. | column | Integer32 | .1.3.6.1.4.1.2.6.2.3.1.3.1.20 |
| cylinkESThreshold mandatory The threshold, in seconds, for the errored second
value in the current 15-minute interval. | column | Integer32 | .1.3.6.1.4.1.2.6.2.3.1.3.1.21 |
| cylinkSecondaryContact mandatory The state of the CSU secondary contact (open or closed). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.22 |
| cylinkSoftwareVersion mandatory The version number of the microcode running in the CSU. | column | OctetString | .1.3.6.1.4.1.2.6.2.3.1.3.1.3 |
| cylinkDTEFraming mandatory The DTE framing selected (D4, or ESF). Framing conversion is
automatically performed at both ends if the DTE is D4 framed and
the network interface is ESF framed. | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.4 |
| cylinkNetworkFraming mandatory The network framing selected (D4, or ESF). Framing conversion is
automatically performed at both ends if the DTE is D4 framed and
the network interface is ESF framed. | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.5 |
| cylinkDTEDS1Mode mandatory The DTE DS-1 mode selected (B8ZS, or AMI). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.6 |
| cylinkOnesResponsibility mandatory The component selected for Ones Density Responsibility (DTE,
or CSU. | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.8 |
| cylinkOnesControl mandatory The Ones Density Control selected (LSB 24, D4 FRM, or ESF DL). | column | Enumeration | .1.3.6.1.4.1.2.6.2.3.1.3.1.9 |