cdx6500IBM2260CfgRespTimeout

IBM2260-OPT-MIB · .1.3.6.1.4.1.449.2.1.2.1.1.20.1.8
MIB view Table view

Object

column mandatory Integer32 
Specifies the amount of time in msec the PAD allows
a terminal, printer or host to respond. As a result,
the TPAD may re-transmit the previous message or abort
the current procedure.
The HPAD aborts the current procedure as though EOT
was received, allowing this HPAD station to disconnect
it's SVC if the host malfunctions. An HPAD with
a response timeout shorter than the hosts ability to respond
may result in Inbound Errors.

Context

MIB
IBM2260-OPT-MIB
OID
.1.3.6.1.4.1.449.2.1.2.1.1.20.1.8
Type
column
Access
readonly
Status
mandatory
Parent
cdx6500PPCTIBM2260PortEntry
Table
cdx6500PPCTIBM2260PortTable
Siblings
14

Syntax

Integer32
Source
COPS-PR-SPPIInteger32
Base type
Integer32

Values & Constraints

Type Constraints
range: -2147483648..2147483647

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
cdx6500IBM2260CfgPortNumber mandatory
The port number corresponding to this port.
columnInteger32.1.3.6.1.4.1.449.2.1.2.1.1.20.1.1
cdx6500IBM2260CfgPortOpt mandatory
Select options on this IBM2260 port as follows: NONE - No option specified ORG - Originate calls from this port ACK - DSP End-to-End Acknowledgements are to be used Any combinat…
columnDisplayString.1.3.6.1.4.1.449.2.1.2.1.1.20.1.10
cdx6500IBM2260CfgRestConnDest mandatory
All calls originating from this port will be routed to the destination specified in this parameter, irrespective of route selection table entries. For example, to route calls to p…
columnDisplayString.1.3.6.1.4.1.449.2.1.2.1.1.20.1.11
cdx6500IBM2260CfgBillRec mandatory
This controls whether billing (accounting) records will be created for calls on this port.
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.12
cdx6500IBM2260CfgElectricalInterfaceType mandatory
Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical…
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.13
cdx6500IBM2260CfgV24ElectricalInterfaceOption mandatory
Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.14
cdx6500IBM2260CfgHighSpeedElectricalInterfaceOption mandatory
Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.15
cdx6500IBM2260CfgPadType mandatory
Indicates whether the port is functioning as a Terminal PAD (TPAD) or a Host PAD (HPAD).
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.2
cdx6500IBM2260CfgPortSpeed mandatory
This is the speed of the port in bits per second, when using internal clocking.
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.3
cdx6500IBM2260CfgConnType mandatory
Specify the control signal handshake required for a connection to be made to this port: simp - simple, no control signals required. simpa - CTS follows RTS, but no control signal…
columnEnumeration.1.3.6.1.4.1.449.2.1.2.1.1.20.1.4
cdx6500IBM2260CfgNumDevice mandatory
Specifies the number of IBM2260 stations on this line.
columnInteger32.1.3.6.1.4.1.449.2.1.2.1.1.20.1.5
cdx6500IBM2260CfgServiceTimer mandatory
The Service Timer specifies the interval of time in seconds between periodic servicing. Such servicing includes intervals between attempts to establish network connections, int…
columnInteger32.1.3.6.1.4.1.449.2.1.2.1.1.20.1.6
cdx6500IBM2260CfgThreshCtr mandatory
Indicates number of consecutive errors that can occur before a station is considered down.
columnInteger32.1.3.6.1.4.1.449.2.1.2.1.1.20.1.7
cdx6500IBM2260CfgPortSubAddr mandatory
Calls addressed to this node and with this subaddress will be routed to this port.
columnDisplayString.1.3.6.1.4.1.449.2.1.2.1.1.20.1.9