cdx6500IBM2260CfgPortSpeed
IBM2260-OPT-MIB ·
.1.3.6.1.4.1.449.2.1.2.1.1.20.1.3
Object
column
mandatory
Enumeration
This is the speed of the port in bits per second, when using internal clocking.
Context
- MIB
- IBM2260-OPT-MIB
- OID
.1.3.6.1.4.1.449.2.1.2.1.1.20.1.3- Type
- column
- Access
- readonly
- Status
- mandatory
- Parent
- cdx6500PPCTIBM2260PortEntry
- Table
- cdx6500PPCTIBM2260PortTable
- Siblings
- 14
Syntax
Enumeration
Values & Constraints
Enumerated Values
4 | speed1200 |
8 | speed1800 |
13 | speed2400 |
14 | speed4800 |
15 | speed9600 |
16 | speed19200 |
99 | speed7200 |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| cdx6500IBM2260CfgPortNumber mandatory The port number corresponding to this port. | column | Integer32 | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.1 |
| cdx6500IBM2260CfgPortOpt mandatory Select options on this IBM2260 port as follows:
NONE - No option specified
ORG - Originate calls from this port
ACK - DSP End-to-End Acknowledgements are to be used
Any combinat… | column | DisplayString | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.10 |
| cdx6500IBM2260CfgRestConnDest mandatory All calls originating from this port will be routed to the
destination specified in this parameter, irrespective of route
selection table entries.
For example, to route calls to p… | column | DisplayString | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.11 |
| cdx6500IBM2260CfgBillRec mandatory This controls whether billing (accounting) records will be
created for calls on this port. | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.12 |
| cdx6500IBM2260CfgElectricalInterfaceType mandatory Specify the Electrical Interface Type:
V.24 - V.24 Electrical Interface Type
V.35 - V.35 Electrical Interface Type
V.36 - V.36 Electrical Interface Type
X.21 - X.21 Electrical… | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.13 |
| cdx6500IBM2260CfgV24ElectricalInterfaceOption mandatory Specify the Pin 22 option:
RI - V.24 uses Pin 22 for Ring Indicator output signal
TM - V.24 uses Pin 22 for Test Mode input signal | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.14 |
| cdx6500IBM2260CfgHighSpeedElectricalInterfaceOption mandatory Specify the cable type:
NONE - V.35/V.36/X.21 DCE with straight through cable
XOVER - V.35/V.36/X.21 DCE with crossover adapter cable | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.15 |
| cdx6500IBM2260CfgPadType mandatory Indicates whether the port is functioning as a Terminal
PAD (TPAD) or a Host PAD (HPAD). | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.2 |
| cdx6500IBM2260CfgConnType mandatory Specify the control signal handshake required for a
connection to be made to this port:
simp - simple, no control signals required.
simpa - CTS follows RTS, but no control signal… | column | Enumeration | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.4 |
| cdx6500IBM2260CfgNumDevice mandatory Specifies the number of IBM2260 stations on this line. | column | Integer32 | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.5 |
| cdx6500IBM2260CfgServiceTimer mandatory The Service Timer specifies the interval of time in
seconds between periodic servicing. Such servicing
includes intervals between attempts to establish network
connections, int… | column | Integer32 | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.6 |
| cdx6500IBM2260CfgThreshCtr mandatory Indicates number of consecutive errors that can occur
before a station is considered down. | column | Integer32 | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.7 |
| cdx6500IBM2260CfgRespTimeout mandatory Specifies the amount of time in msec the PAD allows
a terminal, printer or host to respond. As a result,
the TPAD may re-transmit the previous message or abort
the current procedu… | column | Integer32 | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.8 |
| cdx6500IBM2260CfgPortSubAddr mandatory Calls addressed to this node and with this subaddress
will be routed to this port. | column | DisplayString | .1.3.6.1.4.1.449.2.1.2.1.1.20.1.9 |