lesLecsConfRowStatus
IBM-LES-LECS-MIB ·
.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11
Object
This object is used to create or delete entries in the lesLecsConfTable.
Context
- MIB
- IBM-LES-LECS-MIB
- OID
.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- lesLecsConfEntry
- Table
- lesLecsConfTable
- Siblings
- 10
Syntax
SNMPv2-TC-v1RowStatus
- Source
- SNMPv2-TC-v1RowStatus
- Base type
Enumeration
Values & Constraints
Type Values
1 | active |
2 | notInService |
3 | notReady |
4 | createAndGo |
5 | createAndWait |
6 | destroy |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| lesLecsOperStatus mandatory The operational state of LES/LECS on this entry.
Other defines the transition states between up and down. | column | Enumeration | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1 |
| configDirectScr mandatory Specifies the Sustained Cell Rate (SCR) Traffic
Parameter for the Configuration Direct VCC to the
LECS. The specified rate is used for both forward
and backward directions. If t… | column | NWAYSMSS-MIBBandwidth | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10 |
| lesLecsAdminStatus mandatory The administrative state of the LES/LECS on this entry. | column | Enumeration | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2 |
| lesLecsAtmDevNum mandatory Identifies ATM device to be used to interface with LECS. | column | Integer32 | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3 |
| lesLecsAtmDevLineSpeed mandatory Line Speed of LECS ATM Device.
This should not exposed to the user. | column | - | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4 |
| lesLecsUseBurnedInEsi mandatory Specifies whether a MAC Address burned into the ATM
device should be used as the End System Identifier
component of local ATM Address used when calling LECS. | column | SNMPv2-TC-v1TruthValue | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5 |
| lesLecsConfiguredEsi mandatory Locally Administered End System Identifier that is to be
used as the ESI component of the local ATM Address used
when calling the LECS. | column | NWAYSMSS-MIBAtmPrivateAddrEsi | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6 |
| lesLecsConfiguredSelector mandatory Specifies value to be used as Selector field component
of local ATM Address used when calling the LECS. | column | NWAYSMSS-MIBAtmSelector | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7 |
| configDirectVccType mandatory Specifies type of traffic characteristics to be
associated with Configuration Direct VCC to LECS.
Bandwidth is not reserved for best effort traffic. | column | NWAYSMSS-MIBAtmVccTrafficType | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8 |
| configDirectPcr mandatory Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Configuration Direct VCC to the LECS. The
specified rate is used for both forward and backward
directions. When a be… | column | NWAYSMSS-MIBBandwidth | .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9 |