configDirectPcr

IBM-LES-LECS-MIB · .1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9
MIB view Table view

Object

column mandatory r/w NWAYSMSS-MIBBandwidth 
Specifies the Peak Cell Rate (PCR) Traffic Parameter
for the Configuration Direct VCC to the LECS.  The
specified rate is used for both forward and backward
directions.  When a best effort connection is rejected
due to the PCR, the call may be automatically retried
with a lower PCR.  Retries are performed under the
following conditions:
if (rejected PCR > 100 Mbps)
   retry with PCR = 100 Mbps
else if (25 < rejected PCR <= 100 Mbps)
   retry with PCR = 25 Mbps

Context

MIB
IBM-LES-LECS-MIB
OID
.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.9
Type
column
Access
readwrite
Status
mandatory
Parent
lesLecsConfEntry
Table
lesLecsConfTable
Siblings
10

Syntax

NWAYSMSS-MIBBandwidth
Source
NWAYSMSS-MIBBandwidth
Base type
Integer32

Values & Constraints

No enumerated values or constraints recorded.

Related Objects

Sibling Objects
ObjectTypeSyntaxOID
lesLecsOperStatus mandatory
The operational state of LES/LECS on this entry. Other defines the transition states between up and down.
columnEnumeration.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.1
configDirectScr mandatory
Specifies the Sustained Cell Rate (SCR) Traffic Parameter for the Configuration Direct VCC to the LECS. The specified rate is used for both forward and backward directions. If t…
columnNWAYSMSS-MIBBandwidth.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.10
lesLecsConfRowStatus mandatory
This object is used to create or delete entries in the lesLecsConfTable.
columnSNMPv2-TC-v1RowStatus.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.11
lesLecsAdminStatus mandatory
The administrative state of the LES/LECS on this entry.
columnEnumeration.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.2
lesLecsAtmDevNum mandatory
Identifies ATM device to be used to interface with LECS.
columnInteger32.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.3
lesLecsAtmDevLineSpeed mandatory
Line Speed of LECS ATM Device. This should not exposed to the user.
column-.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.4
lesLecsUseBurnedInEsi mandatory
Specifies whether a MAC Address burned into the ATM device should be used as the End System Identifier component of local ATM Address used when calling LECS.
columnSNMPv2-TC-v1TruthValue.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.5
lesLecsConfiguredEsi mandatory
Locally Administered End System Identifier that is to be used as the ESI component of the local ATM Address used when calling the LECS.
columnNWAYSMSS-MIBAtmPrivateAddrEsi.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.6
lesLecsConfiguredSelector mandatory
Specifies value to be used as Selector field component of local ATM Address used when calling the LECS.
columnNWAYSMSS-MIBAtmSelector.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.7
configDirectVccType mandatory
Specifies type of traffic characteristics to be associated with Configuration Direct VCC to LECS. Bandwidth is not reserved for best effort traffic.
columnNWAYSMSS-MIBAtmVccTrafficType.1.3.6.1.4.1.2.6.118.1.2.1.2.1.1.1.8