ibmSEEnabled
IBM-LAN-EMULATION-EXTENSION-MIB ·
.1.3.6.1.4.1.2.5.8.4.1.2.1.2
Object
column
mandatory
r/w
Enumeration
When enabled(1) the SE Bridge (SEB) will bridge frames to the ports defined in its bridging domain. When disabled(2) the SEB will not bridge frames.
Context
- MIB
- IBM-LAN-EMULATION-EXTENSION-MIB
- OID
.1.3.6.1.4.1.2.5.8.4.1.2.1.2- Type
- column
- Access
- readwrite
- Status
- mandatory
- Parent
- ibmSEBridgeConfigEntry
- Table
- ibmSEBridgeConfigTable
- Siblings
- 12
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enabled |
2 | disabled |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| ibmSEAtmIfNumber mandatory The ATM interface number the Super ELAN (SE) bridging function
is associated with. This number is used to determine the NETWORK ID.
A SE Bridge (SEB) may span ATM adapters but the… | column | - | .1.3.6.1.4.1.2.5.8.4.1.2.1.1 |
| ibmSEBridgeForwardDelay mandatory The delay in seconds that the SEB waits before
transitioning to the next port state. The forward delay should
be large enough to allow all Super ELAN bridges in the
SuperELAN to d… | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.10 |
| ibmSEBridgeAddress mandatory The Bridge MAC Address identifies the SuperELAN for the purposes
of maintaining the SEB Spanning tree. If no value is configured,
the SEB interface with the lowest MAC address wil… | column | SNMPv2-TC-v1MacAddress | .1.3.6.1.4.1.2.5.8.4.1.2.1.11 |
| ibmSEType mandatory This object indicates the type of SEB. sebEN(1)
specifies a type of Ethernet, sebTR(2) specific's a type of
Token Ring. | column | Enumeration | .1.3.6.1.4.1.2.5.8.4.1.2.1.12 |
| ibmSEConfigRowStatus mandatory This object is used to create or delete entries (rows)
in the SuperElan Bridge Configuration Table. | column | SNMPv2-TC-v1RowStatus | .1.3.6.1.4.1.2.5.8.4.1.2.1.13 |
| ibmSEName mandatory This is a user provided name to associate with the SEB.
The SEB name is independent of the ELANs names of the
constituent ELANs of the SEB.
No default, name must be… | column | OctetString | .1.3.6.1.4.1.2.5.8.4.1.2.1.3 |
| ibmSEFrameSize mandatory Indicates the maximum SuperElan frame size. All ELANs in a
single SEB must be set to the same maximum frame size.
Valid Values 1516, 4544, 9234, 18190
… | column | Enumeration | .1.3.6.1.4.1.2.5.8.4.1.2.1.4 |
| ibmSEMacCacheAge mandatory The number of seconds a learned MAC address remains in the
data frame forwarding cache without revalidation. | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.5 |
| ibmSERDCacheAge mandatory The number of seconds a learned route descriptor remains in the
data frame forwarding cache without revalidation. | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.6 |
| ibmSEPriority mandatory The SuperElan Bridge spanning tree priority.
A lower value will increase the likelihood of a SuperElan
bridge becoming the root. This value is appended to the
SuperElan Spanning T… | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.7 |
| ibmSEMaxAge mandatory The age at which the current Spanning Tree configuration is
deemed too old. A value to small may cause the spanning tree to
unnecessarily reconfigure. A value to large will increa… | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.8 |
| ibmSEBridgeHelloTime mandatory The interval of time in seconds between the generation of
Spanning Tree configuration messages generate by the root.
Lower values increase the spanning tree robustness, but
increa… | column | Integer32 | .1.3.6.1.4.1.2.5.8.4.1.2.1.9 |