ibmSEAtmIfNumber

Object

column mandatory r/w

The ATM interface number the Super ELAN (SE) bridging function
is associated with. This number is used to determine the NETWORK ID.
A SE Bridge (SEB) may span ATM adapters but they have to
be on the same network, as specified by the Network ID.
The specific requirement is that the LECs in the Super ELAN
can establish a Data Direct VCC.
              
The Network ID is an ATM configuration parameter that is required
to allow Data Direct VCC's to be established.
              
The value of this object must match an existing value in the ifTable.
This object is set to zero when the ATM interface is not
specified and the agent must determine itself which ATM
interface it is to use. If the agent can not determine a
default ATM interface an error should be returned by the
agent.

Context

MIB: IBM-LAN-EMULATION-EXTENSION-MIB
OID: .1.3.6.1.4.1.2.5.8.4.1.2.1.1
Type: column
Access: readwrite
Status: mandatory
Parent: ibmSEBridgeConfigEntry
Table: ibmSEBridgeConfigTable
Siblings: 12

Related Objects

Sibling Objects

Object	Type	Syntax	OID
ibmSEBridgeForwardDelay mandatory The delay in seconds that the SEB waits before transitioning to the next port state. The forward delay should be large enough to allow all Super ELAN bridges in the SuperELAN to d…	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.10`
ibmSEBridgeAddress mandatory The Bridge MAC Address identifies the SuperELAN for the purposes of maintaining the SEB Spanning tree. If no value is configured, the SEB interface with the lowest MAC address wil…	column	SNMPv2-TC-v1MacAddress	`.1.3.6.1.4.1.2.5.8.4.1.2.1.11`
ibmSEType mandatory This object indicates the type of SEB. sebEN(1) specifies a type of Ethernet, sebTR(2) specific's a type of Token Ring.	column	Enumeration	`.1.3.6.1.4.1.2.5.8.4.1.2.1.12`
ibmSEConfigRowStatus mandatory This object is used to create or delete entries (rows) in the SuperElan Bridge Configuration Table.	column	SNMPv2-TC-v1RowStatus	`.1.3.6.1.4.1.2.5.8.4.1.2.1.13`
ibmSEEnabled mandatory When enabled(1) the SE Bridge (SEB) will bridge frames to the ports defined in its bridging domain. When disabled(2) the SEB will not bridge frames.	column	Enumeration	`.1.3.6.1.4.1.2.5.8.4.1.2.1.2`
ibmSEName mandatory This is a user provided name to associate with the SEB. The SEB name is independent of the ELANs names of the constituent ELANs of the SEB. No default, name must be…	column	OctetString	`.1.3.6.1.4.1.2.5.8.4.1.2.1.3`
ibmSEFrameSize mandatory Indicates the maximum SuperElan frame size. All ELANs in a single SEB must be set to the same maximum frame size. Valid Values 1516, 4544, 9234, 18190 …	column	Enumeration	`.1.3.6.1.4.1.2.5.8.4.1.2.1.4`
ibmSEMacCacheAge mandatory The number of seconds a learned MAC address remains in the data frame forwarding cache without revalidation.	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.5`
ibmSERDCacheAge mandatory The number of seconds a learned route descriptor remains in the data frame forwarding cache without revalidation.	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.6`
ibmSEPriority mandatory The SuperElan Bridge spanning tree priority. A lower value will increase the likelihood of a SuperElan bridge becoming the root. This value is appended to the SuperElan Spanning T…	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.7`
ibmSEMaxAge mandatory The age at which the current Spanning Tree configuration is deemed too old. A value to small may cause the spanning tree to unnecessarily reconfigure. A value to large will increa…	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.8`
ibmSEBridgeHelloTime mandatory The interval of time in seconds between the generation of Spanning Tree configuration messages generate by the root. Lower values increase the spanning tree robustness, but increa…	column	Integer32	`.1.3.6.1.4.1.2.5.8.4.1.2.1.9`

Object

Context

Syntax

Values & Constraints

Related Objects