hwXponDeviceTypeBLosAlarmControlState
HUAWEI-XPON-COMMON-MIB ·
.1.3.6.1.4.1.2011.6.145.1.1.4.22
Object
scalar
r/w
Enumeration
The object is used to open or close the switch of the los alarm for the standby port in the Type B protect group. Options: 1.enable(1) - Open the switch of the los alarm for the standby port in the Type B protect group 2.disable(2) - Close the switch of the los alarm for the standby port in the Type B protect group The default value is disable(2).
Context
- MIB
- HUAWEI-XPON-COMMON-MIB
- OID
.1.3.6.1.4.1.2011.6.145.1.1.4.22- Type
- scalar
- Access
- readwrite
- Status
- current
- Parent
- hwXponDeviceCommonGlobalObjects
- Siblings
- 41
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | enable |
2 | disable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwXponDeviceLosAlarmControlState The object is used to open or close the switch of the advanced los alarm.
Options:
1.enable(1) - Open the switch of the advanced los alarm
2.disable(2) - Close the switch o… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.1 |
| hwXponDeviceOperatorCheckSwitch The object is used to set operator check switch.
Options:
1.enable(1) - Open the switch
2.disable(2) - Close the switch
The default value is disable(2). | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.10 |
| hwXponDeviceOperatorCheckCode The object is used to set operator check code. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.4.11 |
| hwXponDeviceOperatorCheckHistoryCodeMaxNumber The object is used to set max number of operator check history code.
range: 0-11. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.4.12 |
| hwXponDeviceOperatorCheckHistoryCodeClear The object is used to clear operator check history code. | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.4.13 |
| hwXponCommonDeviceOntPowerReductionSwitch This object is used to open or close the ONT global switch.
Options:
1.enable(1) - Open the switch of the ONT power reduction.
2.disable(2) - Close the switch of the… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.14 |
| hwXponDeviceAntiWeakLightRogueSwitch This object is used to enable or disable the function of anti-rogue ONTs that transmit weak optical signals.
Options:
1.enable(1) - Enable the function of anti-rogue ONTs … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.15 |
| hwXponDeviceOntUserMulticastProcess This object indicates the processing mode of the ONT user-side multicast packet.
Options:
1.forward(1) - Indicates the forward processing mode.
2.discard(2) - Indica… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.16 |
| hwXponDevicePortFaultCheckSwitch This object indicates the switch value of PON fault check.
Options:
1.enable(1) - The switch value of PON fault check is enable.
2.disable(2) - The switch value of PO… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.17 |
| hwXponDeviceRogueOntSelfDetectSwitch This object indicates the self-detected switch of rogue ONTs.
Options:
1.enable(1) - The self-detected switch of rogue ONTs is enable.
2.disable(2) - The self-detect… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.18 |
| hwXponDeviceOntOfflineMonitorSwitch This object indicates the switch value of ONTs offline monitoring.
Options:
1.enable(1) - The switch of ONTs offline monitoring is enable.
2.disable(2) - The switch … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.19 |
| hwXponCommonOntCatvDefaultState This object is used to set the default status of ONT CATV ports.
Options:
1. on(1) - The default status of ONT CATV ports is on
2. off(2) - The default stat… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.2 |
| hwXponDeviceOntOfflineMonitorAlarmThresholdRatio This object indicates the ratio of ONTS offline monitoring alarm generation threshold.
The restoration threshold must be higher than the generation threshold.
The default value is… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.20 |
| hwXponDeviceOntOfflineMonitorRestoreThresholdRatio This object indicates the ratio of ONTS offline monitoring alarm restoration threshold.
The restoration threshold must be higher than the generation threshold.
The default value i… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.21 |
| hwXponDeviceOltOpticalAlarmAutoMonitorSwitch The object is used to configure automatic monitoring on OLT optical alarm, the function will be disabled when the PON port is bound to optical alarm profile.
Options:
1. disable(2… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.23 |
| hwXponDeviceOntOpticalAlarmAutoMonitorSwitch The object is used to configure automatic monitoring on ONT optical alarm, the function will be disabled when the ONT is bound to optical alarm profile.
Options:
1. disable(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.24 |
| hwXponDeviceVsOntIdAllocPolicy This object indicates the ONT ID alloc policy of virtual system.
Options:
1.global(1) - The ONT ID alloc policy is global.
2.independent(2) - The ONT ID alloc policy i… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.25 |
| hwXponDeviceOntLowBandwidthUsageMonitorSwitch This object is used to enable or disable monitoring on ONT abnormal bandwidth request.
Options:
1.enable(1) - Enable monitoring on ONT abnormal bandwidth request
2.disable(2) … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.26 |
| hwXponDeviceAntiRogueOamOntAutoIsolateMode This object indicates the anti-rogueont isolation mode for OAM management mode ONT, it is used for EPON ONT.
Options:
1.deactivate(1) - Indicates that the isolation mode is de… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.27 |
| hwXponDeviceAntiRogueSnmpOntAutoIsolateMode This object indicates the anti-rogueont isolation mode for SNMP management mode ONT,it is used for EPON MxU.
Options:
1.deactivate(1) - Indicates that the isolation mode is de… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.28 |
| hwXponDeviceOntOpticalDdmQuickQuerySwitch This object is used to enable or disable fast query of DDM parameters of an ONT optical module.
Options:
1.disable(1) - Indicates that fast query of DDM parameters … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.29 |
| hwXponDeviceGroupPowerOffControlState This object is used to open or close the group power off report switch.
Options:
1.enable(1) - Open the group power off report switch
2.disable(2) - Close the group p… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.3 |
| hwXponDeviceAutoRecoverySwitch This object indicates the xPON auto recovery switch.
Options:
1. enable(1) - Indicates that the xPON auto recovery switch is enable
2. disable (2) - Indicates that the xPON … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.30 |
| hwXponDeviceAuthConflictCheckBySnSwitch This object indicates the switch value of ONT authentication conflict check by SN.
Options:
1.enable(1) - Indicates that the switch value of ONT authentication con… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.31 |
| hwXponDeviceAuthConflictCheckByLoidSwitch This object indicates the switch value of ONT authentication conflict check by LOID.
Options:
1.enable(1) - Indicates that the switch value of ONT authentication c… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.32 |
| hwXponDeviceOperatorCheckVersion The object is used to set operator check version
Options:
1.version1(1), - set operator check version1
2.version2(2), - set operator check version2
The default value is ve… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.33 |
| hwXponDeviceAutoFindAdditionalNoticeTimes The object indicates the times of sending auto-found ONT additional notices.
The value ranges from 0 to 10. If this parameter is set to 0, the auto found ONT additional notice fu… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.34 |
| hwXponDeviceAutoFindAdditionalNoticeDistanceTime The object indicates the interval for sending auto-found ONT additional notices.
The value ranges from 30s to 100s.
This node must be set together with the hwXponDeviceAutoFindA… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.35 |
| hwXponDeviceOpticalModuleAlarmControlSwitch The object is used to decide whether initial optical module alarm should be reported or suppressed when a port is shut down.
Options:
1.enable(1) - When a port is shut down, no a… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.36 |
| hwXponDeviceOpticalTraceabilitySwitch This object indicates the optical traceability switch.
Options:
1. enable(1) - Indicates that the optical traceability switch is enable
2. disable(2) - Indicates that the opt… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.37 |
| hwXponDeviceLosAlarmControlDyingGaspONTNumberRatio The object is used to set threshold number ratio of Dyinggasp ONT number to send LOS alarm, the unit is %.
The value 0 indicates that the ratio is unconcern to send LOS alarm. Th… | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.38 |
| hwXponDeviceLosAlarmControlDyingGaspONTTime The object is used to set threshold time of Dyinggasp ONT to send LOS alarm, the unit is s.
The default value is 6s. | scalar | Integer32 | .1.3.6.1.4.1.2011.6.145.1.1.4.39 |
| hwXponDeviceAutofindConflictCheckSwitch This object is used to open or close the ONT autofind conflict-check switch.
Options:
1.enable(1) - Open the switch of the ONT autofind conflict-check
2.disable(2) - Close … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.4 |
| hwXponDeviceTotalONTNumber The object is used to get the total number of ONT in the OLT device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.4.40 |
| hwXponDeviceTotalOnlineONTNumber The object is used to get the total number of online ONT in the OLT device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.4.41 |
| hwXponDeviceTotalOfflineONTNumber The object is used to get the total number of offline ONT in the OLT device. | scalar | SNMPv2-SMIInteger32 | .1.3.6.1.4.1.2011.6.145.1.1.4.42 |
| hwXponDeviceModifyBoundProfileSwitch This object is used to enable or disable the bound profile modification switch.
Options:
1.enable(1) - Enable to modify bound profile
2.disable(2) - Disable to modify bound… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.5 |
| hwXponDeviceAlarmClearOnShutdown The object is used to set whether clear active alarm on shutdown object.
Options:
1.enable(1) - Open the switch, clear active alarm on shutdown object
2.disable(2) - Close … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.6 |
| hwXponDeviceSuppressInitialAlarmState The object is used to set whether suppress initial alarm.
Options:
1.enable(1) - Open the switch, suppress initial alarm state
2.disable(2) - … | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.7 |
| hwXponDeviceAllowDifferentRangeSwitch This object is used to enable or disable the switch of allowing protect group member ports have different distances.
Options:
1.enable(1) - Enable the switch of allowing prote… | scalar | Enumeration | .1.3.6.1.4.1.2011.6.145.1.1.4.8 |
| hwXponOntInteroperabilityFileVersion This object is used to query the version of the ont interoperability file.
The value of this node:
Year(2byte) : 65535-invalid
Month(1byte) : 255-invalid
Day(1byte)… | scalar | OctetString | .1.3.6.1.4.1.2011.6.145.1.1.4.9 |