hwVapTemporaryManagementSwitch
HUAWEI-WLAN-CONFIGURATION-MIB ·
.1.3.6.1.4.1.2011.6.139.11.1.20.1.7
Object
column
r/w
Enumeration
If this parameter is set to 2, the VAP automatically becomes the management VAP for offline APs after the AP is disconnected. It can still send signals so that maintenance personnel can access it to identify faults (the security mode is the non-authentication security mode and the SSID will be hidden). The default value is 1.
Context
- MIB
- HUAWEI-WLAN-CONFIGURATION-MIB
- OID
.1.3.6.1.4.1.2011.6.139.11.1.20.1.7- Type
- column
- Access
- readwrite
- Status
- current
- Parent
- hwVapProfileEntry
- Table
- hwVapProfileTable
- Siblings
- 89
Syntax
Enumeration
Values & Constraints
Enumerated Values
1 | disable |
2 | enable |
Related Objects
Sibling Objects
| Object | Type | Syntax | OID |
|---|---|---|---|
| hwVapProfileName This object indicates the name of a VAP profile. It is the index of the table. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.1 |
| hwVapType This object indicates the VAP type. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.10 |
| hwVapStaAccessMode This object indicates the access mode. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.11 |
| hwVapStaAccessModePorfile This object indicates blacklist and whitelist profiles. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.12 |
| hwVapRoamHomeAgent This object indicates the tunnel endpoint for inter-Layer 3 roaming. The default value is 1.. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.13 |
| hwVapRoamVlanMobilityGroup This object indicates the VLAN group for roaming. For the same VLAN, if the VAP is in different VLAN groups for roaming, the roaming is also inter-Layer 3 roaming. The default val… | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.14 |
| hwVapRoamLayer3Switch This object indicates the status of the Layer 3 roaming function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.15 |
| hwVapBandSteerSwitch This object indicates the status of the band steering function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.16 |
| hwVapLearnIpv4Address This object indicates the status of the IPv4 address learning function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.17 |
| hwVapLearnIpv6Address This object indicates the status of the IPv6 address learning function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.18 |
| hwVapLearnIpv4AddressStrict This object indicates the status of the strict address learning (only through the DHCP) function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.19 |
| hwVapForwardMode This object indicates the service forwarding mode. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.2 |
| hwVapIpBindCheck This object indicates the status of the IP binding relationship check function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.20 |
| hwVapArpBindCheck This object indicates the status of the ARP binding relationship check function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.21 |
| hwVapOptinon82InsertSwitch This object indicates the status of the function of appending the Option 82 field to DHCP messages. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.22 |
| hwVapOptinon82InsertRidFormat This object indicates the format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.23 |
| hwVapDhcpTrustPort This object indicates the status of the radio interface DHCP trust function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.24 |
| hwVapNdTrustPort This object indicates the status of the radio interface ND trust function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.25 |
| hwVapSecurityProfile The object indicates the security profile that is bound to the VAP. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.26 |
| hwVapTrafficProfile The object indicates the traffic profile that is bound to the VAP. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.27 |
| hwVapSsidProfile The object indicates the SSID profile that is bound to the VAP. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.28 |
| hwVapAuthenticationProfile The object indicates the authentication profile that is bound to the VAP. The default value is default. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.29 |
| hwVapTunnelForwardProtocol This object indicates the format of packets forwarded by tunnel. The default value is 0xd.? bit0: dot1x? bit1: dhcp? bit2: http? bit3: wapi? bit4: mdns. | column | SNMPv2-SMIUnsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.3 |
| hwVapSacProfile The object indicates the SAC profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.30 |
| hwVapProfileRowStatus This object indicates the row status of this table. ROWSTATUS_CREATEANDFLOW and ROWSTATUS_DESTROY are commonly used.? ROWSTATUS_UNDEFINED: undefined? ROWSTATUS_ACTIVE: active? ROW… | column | SNMPv2-TCRowStatus | .1.3.6.1.4.1.2011.6.139.11.1.20.1.31 |
| hwVapUserProfile The object indicates the user profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.32 |
| hwVapHotspot2Profile The object indicates the Hotspot2.0 profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.33 |
| hwSoftgreProfile The object indicates the Softgre profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.34 |
| hwVapOptinon82RidUserDefined This object indicates the user-defined format of remote-id(RID) in the Option 82 field to DHCP messages. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.35 |
| hwVapOptinon82RidMacFormat This object indicates the AP MAC address format of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 0. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.36 |
| hwVapOptinon82InsertCidFormat This object indicates the format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.37 |
| hwVapOptinon82CidUserDefined This object indicates the user-defined format of circuit-id(CID) in the Option 82 field to DHCP messages. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.38 |
| hwVapOptinon82CidMacFormat This object indicates the AP MAC address format of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 0. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.39 |
| hwVapServiceSwitch This object indicates the status of the VAP service function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.4 |
| hwVapUccProfile The object indicates the UCC profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.40 |
| hwVapAntiAttackBroadcastFloodSwitch This object indicates the status of the VAP anti-attack braoadcast flood function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.41 |
| hwVapAntiAttackBroadcastFloodStaRateThreshold This object indicates the anti-attack braoadcast flood sta-rate-threshold for the VAP. The default value is 10. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.42 |
| hwVapAntiAttackBroadcastFloodBlacklistSwitch This object indicates the status of the VAP anti-attack braoadcast flood blacklist function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.43 |
| hwVapLearnIpv6AddressStrict This object indicates the status of the strict address learning (only through the DHCPv6) function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.44 |
| hwVapAntiAttackARPFloodSwitch This object indicates the status of the VAP anti-attack ARP flood function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.45 |
| hwVapAntiAttackARPFloodStaRateThreshold This object indicates the anti-attack ARP flood sta-rate-threshold for the VAP. The default value is 5. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.46 |
| hwVapAntiAttackARPFloodBlacklistSwitch This object indicates the status of the VAP anti-attack ARP flood blacklist function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.47 |
| hwVapAntiAttackNDFloodSwitch This object indicates the status of the VAP anti-attack ND flood function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.48 |
| hwVapAntiAttackNDFloodStaRateThreshold This object indicates the anti-attack ND flood sta-rate-threshold for the VAP. The default value is 16. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.49 |
| hwVapAutoOffStartTime This object indicates the start time of VAP profile. The format is HH:MM:SS. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.5 |
| hwVapAntiAttackNDFloodBlacklistSwitch This object indicates the status of the VAP anti-attack ND flood blacklist function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.50 |
| hwVapAntiAttackIGMPFloodSwitch This object indicates the status of the VAP anti-attack IGMP flood function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.51 |
| hwVapAntiAttackIGMPFloodStaRateThreshold This object indicates the anti-attack IGMP flood sta-rate-threshold for the VAP. The default value is 4. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.52 |
| hwVapAntiAttackIGMPFloodBlacklistSwitch This object indicates the status of the VAP anti-attack IGMP flood blacklist function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.53 |
| hwVapDefenceProfile The object indicates the Defence profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.54 |
| hwVapTimeRange The object indicates the TimeRange . | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.55 |
| hwVapPermitVlanList This object indicates the PermitVlanList. The default value is 0. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.56 |
| hwVapSfnRoamSwitch This object indicates the status of the SFN Roam function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.57 |
| hwVapStaNetworkDetectSwitch This object indicates the status of sta network reachable detect function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.58 |
| hwVapLearnIpv4AddressIpconflictuncheck This object indicates the status of the IPv4 address conflict check function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.59 |
| hwVapAutoOffEndTime This object indicates the end time of VAP profile. The format is HH:MM:SS. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.6 |
| hwVapLearnIpv6AddressIpconflictuncheck This object indicates the status of the IPv6 address conflict check function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.60 |
| hwVapRadiusTemplate This object indicates the name of radius-server template. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.61 |
| hwVapBackUpState This object indicates the state of the radiusdownBackup vap. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.62 |
| hwVapBackUpMode This object indicates the mode of the switch which triges vap on or off. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.63 |
| hwVapRadiusState This object indicates the state of radius server. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.64 |
| hwVapKeepServiceSwitch This object indicates the status of vap keep service function. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.65 |
| hwVapNaviACID This object indicates the AC index. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.66 |
| hwVapNaviACWlanId This object indicates the wlan index. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.67 |
| hwVapHighwayEnable This object indicates the status of vap highway status. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.68 |
| hwVapServiceExpAnalysisSwitch This object indicates the status of service experience analysis. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.69 |
| hwVapServiceExpAnalysisSnoopingPort This object indicates SIP snooping port. The default value is 5060. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.70 |
| hwVapAutonavigationRoamOptimizeSwitch This object indicates whether to enable autonavigation roaming optimization. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.71 |
| hwVapMdnsPolicyLocalACSwitch This object indicates the status of vap MDNS policy on local ac. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.72 |
| hwVapProfileMdnsSnooping This object indicates the switch of MDNS snooping. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.73 |
| hwVapSplitTunnelAcl This object indicates configure of split tunnel ACL. The default value is 65535. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.74 |
| hwVapSplitTunnelAclIPv6 This object indicates configure of split tunnel IPv6 ACL. The default value is 65535. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.75 |
| hwVapApZoneName This object indicates the zone name of vap. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.76 |
| hwVapRadio This object indicates the radio that vap takes effect. The default value is 0. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.77 |
| hwVapProfileMuBaTriggerMode This object indicates the trigger mode of sending MU-BA. The default value is 2. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.78 |
| hwVapProfileDynamicFlowInspection This object indicates the switch of dynamic flow inspection. The default value is 3. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.79 |
| hwVapServiceVlan This object indicates the service VLAN for the VAP. The default value is 1. | column | Unsigned32 | .1.3.6.1.4.1.2011.6.139.11.1.20.1.8 |
| hwVapiConnectSwitch This object indicates the switch of iconnect. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.80 |
| hwVapOptinon82RidPattern This object indicates the pattern of remote-id(RID) in the Option 82 field to DHCP messages. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.81 |
| hwVapOptinon82CidPattern This object indicates the pattern of circuit-id(CID) in the Option 82 field to DHCP messages. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.82 |
| hwVapCPETunnelProfile The object indicates the CPE-Tunnel profile that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.83 |
| hwVapProfileDnsSnooping This object indicates the switch of DNS snooping. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.84 |
| hwVapNaviSeviceVlanCheckSwitch This object indicates the switch of navi service vlan. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.85 |
| hwVapLearnAddressDhcpv6Slaac This object indicates the status of the strict address learning (through the DHCPv6 SLAAC) function. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.86 |
| hwVapSIpFpmClearColorFlag This object indicates the switch of sipfpm clear color-flag. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.87 |
| hwVapUserFlowSyslogSwitch This object indicates the switch of user flow syslog. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.88 |
| hwVapTrackInterfaceName The object indicates the VE interface name that is bound to the VAP. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.89 |
| hwVapVlanPool This object indicates the VLAN pool to which the VAP is bound. | column | OctetString | .1.3.6.1.4.1.2011.6.139.11.1.20.1.9 |
| hwVapiConnectParseUrlSwitch This object indicates the switch of iconnect parsing url. The default value is 1. | column | Enumeration | .1.3.6.1.4.1.2011.6.139.11.1.20.1.90 |